PORSCHE 911 ENGINE MANAGEMENT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
By charles probst. This great book covers theory of operation, troubleshooting and service, as well as high performance tuning! Even if your car does not need repair, this is a wonderful guide to understanding how your Porsche’s injection system works. The theory of operation is so well explained and easy to follow that you will actually find the reading entertaining.
General Fitment ACCESSORY
Finally! The authoritative manual on Bosch fuel injection. This is the only book that fully explains all aspects of these Bosch systems: motronic, l-jetronic, lh-jetronic, lh-motronic, d-jetronic, k-jetronic, ke-jetronic, and ke-motronic. You will find specific information on the newest ke-motronic and lh-motronic systems that is not available from any other source.
General Fitment ACCESSORY
The unichip is a computer and harness with factory connectors that electronically resides between your car's ecu and engine in an arrangement known as "piggybacking" because it does not replace the factory computer, enabling 100 percent of an engine's untapped power. Sold worldwide for more than a decade, the unichip is a tested and proven engine performance product used on the street, racetrack, and in off-road applications.
Unichip plug n play facts:
-no permanent host vehicle physical or electronic modifications with no footprint for warranty concerns.
-simple installation (15-45 minutes depending on application)
-5 fully integrated user selectable map sets, each with timing, fuel, and boost curv...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,056.19
Make a selection
Kit includes:
Software fast load, sport air filter, sport muffler set " brombacher" , mounting kit muffler, ipd with 82 mm throttlebody.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 294kw (400hp) @ 7500rpm
Max. Torque - 415nm @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to ou...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$6,339.41
Make a selection
Improve sound and performance by decreasing exhaust backpressure with our catalytic bypass kit. - + 18 crank hp & + 13 crank torque. - weighs 28 lbs. (13 kg). - t 304 stainless steel. - made in europe. - reduces thermal load on the heads. We recommend purchasing one our prepackaged installation kits, part # FVDmk993301 please note: cat bypass pipes are not c.a.r.b. Certified (california) and are for racing use only. FVD is not responsible for emissions compliance. Engine management software must be updated to avoid a check engine light, purchase part # FVD99361891 or FVD99361890.
General Fitment 911 1994-98
$3,371.18
Make a selection
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
For 1996 model year Porsches please see our part number FVD 993 618 71. You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us. The reason is 1996 model year ecu eprom's could only be flash loaded with software one time. To program these units requires the use of a coding socket. A late model ecu (1...(choose a part on the right to read more)
General Fitment 911 1994-98
$1,094.50
Make a selection
Clewett engineering high performance ignition wires are 8mm, with a 2 layer silicone jacket, inside a 1200 degree protective sleeve. This spiral core, resister conductor wire provides emi/rfi suppression for all ignition and engine management systems. These wires are a great choice for racing or street applications. Red and black are standard colors.
Please indicate desired color when ordering. For xdi single and dual plug systems.
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
The accessport is the world's best selling, most flexible, and easiest to use ecu upgrade solution for your GT-r. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Follow cobb's staged upgrade path with pre-loaded off the shelf (ots) maps or use custom mapping for any modification level. It's the last engine management solution you'll ever need. Simple ecu flashing with gauge package! The new in-cabin mountable accessport v3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge cluste...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,208.25
Make a selection
The accessport is the world's best selling, most flexible, and easiest to use ecu upgrade solution for your GT-r. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Follow cobb's staged upgrade path with pre-loaded off the shelf (ots) maps or use custom mapping for any modification level. It's the last engine management solution you'll ever need. Simple ecu flashing with gauge package! The new in-cabin mountable accessport v3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge cluste...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$2,632.50
Make a selection
Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders have extremely high thermal resistance and are nikasil coated to reduce wear and friction. We also have the piston rings (sealing and oil scrapers) pre-installed to ensure reliability. Each of our piston and cylinder kits are complete and ready for installation. Features: mahle forged 935 3.0 l turbo pistons mahle nikasil coated cylinders increased 7:1 compression = greater acceleration 95 mm pistons / 95 mm finned wr group 0 cylinders piston rings pre-installed piston pins and circlips are included complete set of 6 - ready for installation made in Germany we recommend the complete engine gas...(choose a part on the right to read more)
General Fitment 911 1970-73
From $6,197.50
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Clewett engineering high performance ignition wires are 8mm, with a 2 layer silicone jacket, inside a 1200 degree protective sleeve. This spiral core, resister conductor wire provides emi/rfi suppression for all ignition and engine management systems. These wires are a great choice for racing or street applications. Red and black are standard colors.
Please indicate desired color when ordering. For xdi dual plug systems; you need to purchase both upper (r919222) and lower spark plug wires.
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
Kit includes:
Fast load software, power-flow kit
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 243kw (330hp) @ 7000rpm
Max. Torque - 385nm (284lbf ft) @ 4500rpm
Max. Speed - 291km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.8s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of soft...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,815.00
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 232kw (315hp) @ 7000rpm
Max. Torque - 360nm (266lbf ft) @ 5000rpm
Max. Speed - 285km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.0s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management soft...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,205.60
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 9...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- software performs flawlessly on your 95' and 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight fly...(choose a part on the right to read more)
General Fitment 911 1994-98
$3,294.50
Make a selection
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 288kw (392hp) @ 7500rpm
Max. Torque - 400nm (295lbf ft) @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$1,629.08
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 239kw (325hp) @ 7000rpm
Max. Torque - 370nm (273lbf ft) @ 4500rpm
Max. Speed - 287km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.9s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,833.10
Make a selection
Clewett engineering high performance ignition wires are 8mm, with a 2 layer silicone jacket, inside a 1200 degree protective sleeve. This spiral core, resister conductor wire provides emi/rfi suppression for all ignition and engine management systems. These wires are a great choice for racing or street applications. Red and black are standard colors.
Please indicate desired color when ordering.
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- software performs flawlessly on your 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us to ensure what control unit you have. The reason is 1996 model year ecu eprom's could only be fl...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sport catalytic kit, sport camshafts
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 246kw (335hp) @ 7000rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 292km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 porsc...(choose a part on the right to read more)
General Fitment 911 1998-05
$8,958.40
Make a selection
Clewett engineering high performance ignition wires are 8 mm, with a 2 layer silicone jacket, inside a 1200 degree protective sleeve. This spiral core, resister conductor wire provides emi/rfi suppression for all ignition and engine management systems. These wires are a great choice for racing or street applications. Red and black are standard colors.
Please indicate desired color when ordering.
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (420hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 360kw (490hp) @ 6000rpm
Max. Torque - 735nm (542lbf ft) @ 4000rpm
Max. Speed - 318km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.9s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,538.90
Make a selection
Kit includes:
Software fast load dme, sport air filter, header system, sportmufflers and endtips 3,8l to fit the mufflers to the bumper.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 239kw (325hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 259kw (352hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,337.20
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler (100 cell sport catalytic), k24-race turbocharger l/r
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 397kw (540hp) @ 7000rpm
Max. Torque - 760nm (561lbf ft) @ 4500rpm
Max. Speed - 331km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally le...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$14,998.41
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|