PORSCHE 911 EXHAUST END TUBE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Motorsport quality for the ultimate durability and power on the street and track!
Stainless steel quality: wnr. 1.4301 (x5crni18-10), aisi 304 (v2a)
Developed and tested to survive the grueling environment of endurance racing.
Shorter length headers tend to crack on cylinders 3 and 4 under the higher heat and vibration at the track. Shorter pipe length does not have room to expand like a longer tube header which causes the cracking. Our double push-piece design on cylinders 3 and 4 allows the shorter length header to expand under these conditions and prevents cracking that has always been an issue on cylinders 3 and 4.
FVD Brombacherheaders are the only headers on the market which feature this inno...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,902.70
Make a selection
+ 25 crank hp & + 20 crank torque.
- 2.5" tubing (63.5 mm) straight through design, for max. Power.
- 100 l tri-metal hjs ?hf? High flow catalytic converters.
- includes heat exchangers that connect up to the factory system.
- weighs 28 kg (61 lbs) which is an 11 kg (24 lb. Weight savings) over the factory system.
- 9.5 lb. Weight savings.
- t 316 stainless steel for improved durability over t 304.
- 3.5? (90 mm) dual oval, double walled polished tips included.
- intoxicating growl at idle, partial throttle and wide open throttle with the valves open. Factory quiet with them closed.
- absolutely no drone in the cabin.
- made in Germany.
Please note: you must also order the retrofit electronic k...(choose a part on the right to read more)
General Fitment 911 1994-98
$10,891.34
Make a selection
Motorsport quality for the ultimate durability and power on the street and track! Developed and tested to survive the grueling environment of endurance racing. Shorter length headers tend to crack on cylinders 3 and 4 under the higher heat and vibration at the track. Shorter pipe length does not have room to expand like a longer tube header which causes the cracking. Our double push-piece design on cylinders 3 and 4 allows the shorter length header to expand under these conditions and prevents cracking that has always been an issue on cylinders 3 and 4. FVD Brombacherheaders are the only headers on the market which feature this innovative design ensuring years of trouble free operation. Through countless hours...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,902.70
Make a selection
Continuing on our modification path for the Porsche 997.2 turbo, agency power has just finished and released their new carbon fiber cold air intake kit. the carbon fiber airbox is a direct replacement for the OEM intake box. the airbox is made using a prepreg process which allows the entire airbox to be flawless from pulls. similar in shape to the OEM box for fitment, this carbon fiber unit features enlarged holes to fit dual K&N cone air filters. the 2x2 weave is finished in a gloss clear coat and sits nicely where the standard plastic box once was. These filters are pressed in through the rear of the intake box utilizing the rubber seal on the filter as a secure fit.
Each filter mates up to the factory...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,500.95
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$7,854.00
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
FVD "brombacher" titan sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 100 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 42 lbs. (19,3 kg)
- material: titan
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 PorscheĀ® sound. In addition, bromb...(choose a part on the right to read more)
General Fitment 911 1989-94
From $21,479.70
Make a selection
Sound switch muffler for all 996 models.
(including tailpipe adapters for 3.4l modell)
The flaps are integrated into the exhaust system to be opened and closed.
The double tube muffler system has a long tube which is flown through the muffler if the flap closed (silent mode). With the flap open a short tube is drawn into and bypasses the muffler (sound mode).
Our exhaust valve is controlled automatically or individually and can be opened or closed by a switch.
- up to 10% more power (depending on model)
- automatically or individually switchable
- fit OEM tailpipes
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to...(choose a part on the right to read more)
General Fitment 911 1998-05
$3,762.00
Make a selection
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,792.70
Make a selection
Product details:
Complete high performance exhaust system provides loud & aggressive cup car sound with dual outlets
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-major improvement in power throughout the rpm range.
-saves 43 lbs from the rear of the vehicle
-loud and aggressive cup car sound. Recommended for track use only!
-constructed from high quality 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel tubing
-rsr long-tube headers feature equal length primary pipes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors
-dual outlet system comes with all required hardware
-available optio...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
From $2,795.00
Make a selection
- equal length headers with long tube design
- 200 cell German hjs "hd" racing sport catalysts with "u torque" design.
- 2 3/4" tubing (70mm)
- rsr style connections and quick release clamps
- quad 3.5" (90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only.
- weighs 62 lbs.(28,0 kg).
Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany.
Performance gains (includes FVD software, sport airfilter and exhaust), based on the 3.8 l:
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7900rpm
Acceleration 0-100km/h - 4.4s
Our "brombacher" sys...(choose a part on the right to read more)
General Fitment 911 2005-08
From $8,686.70
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
- equal length headers with long tube design
- 200 cell German hjs "hf" sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- rsr style connections and quick release clamps
- quad 3.5" (90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only.
- weighs 62 lbs.(28,0 kg).
Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany.
Performance gains (includes FVD software, sport airfilter and exhaust):, based on the 3.8 l:
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7900rpm
Acceleration 0-100km/h - 4.4s
Our "brombacher" system use...(choose a part on the right to read more)
General Fitment 911 2005-08
From $8,190.60
Make a selection
FVD "brombacher" level 3 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software, bmc sport air filter and our "brombacher" stainless steel exhaust system for the 997s-2 dfi.
"brombacher" exhaust system facts (based on 997s):
- + 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
- 12lbs (5 kg) weight savings
Stock:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:...(choose a part on the right to read more)
General Fitment 911 2009-12
$10,371.90
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
FVD 997 GT3 4.1 level 3 kit - max. Power - 485 hp (357 kw) @ 8100 rpm - max. Torque - 354 lb ft (480 nm) @ 5650 rpm - max. Speed - 198 mph (320 kph) - max. Rpm - 8600 rpm - acceleration 0-100 kph (0-62 mph)* - 3.7s * based on German tests done with kph. 100 kph = 62.137 mph the FVD conversion kit includes: mahle piston & cylinder set 4.1 l (106mm), 997.1 & 997.2 GT3/rs x 1 FVD software upgrade for 3.6 l to 4.1l with my genius flash tool x 1 bmc sport air filter for 997.1 GT3 x 1 intake manifold 4.0 l x 1 engine gasket set 997 GT3 x 1 cylinder head gaskets for 4.1 l FVD conversion x 2 cylinder base gasket for 4.1 l FVD conversion x 2 intermediate shaft bearings x 2 intermediate shaft thrust bearings x 2 connecti...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $14,548.75
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
Product details:
Complete high performance exhaust system provides loud & aggressive cup car sound with dual outlets
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-major improvement in power throughout the rpm range.
-saves 43 lbs from the rear of the vehicle
-loud and aggressive cup car sound. Recommended for track use only!
-constructed from high quality 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel tubing
-rsr long-tube headers feature equal length primary pipes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors
-dual outlet system comes with all required hardware
-available optio...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
$3,045.00
Make a selection
FVD "brombacher" level 3 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software, bmc sport air filter and our "brombacher" stainless steel TUV exhaust system for the 997s-2 dfi.
"brombacher" exhaust system facts (based on 997s):
- + 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
- 12lbs (5 kg) weight savings
Stock:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 1...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,711.90
Make a selection
Back pressure is extremely reduced trough specific design with 4-tube exhaust muffler. 3 tubing (70mm) straight through design) - stainless steel exhaust system - 200 cell high flow hd sport catalysts - weighs 39 lbs. (18.1 kg) - end tips included - made in Germany - dme programming not necessary. Tech tip: order also repair/gasket set FVD mk9 970 02
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 TURBO/GT2 2007-09
From $6,698.86
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- catbypass without heating
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning PorscheĀ® owner and offer unmatched performance, unparalleled quality, and incredible value. All...(choose a part on the right to read more)
General Fitment 911 1989-94
From $5,810.20
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
It might look like other sport test pipes, but the similarities end there. These are completely handmade by Porsche fanatics whose sole dedication is to squeeze out every ounce of performance. With dual welds at joints for astonishing durability, and 100% mandrel bends with every tube polished even on the inside, this exhaust maxes your cars airflow. Schnells design and quality means less weight, and also delivers a furious sound that makes your engine sound like it was developed to. Imported high flow catalytic converters allow for a much higher volume of air to pass through them, and this translates to more horsepower and a throatier, aggressive exhaust note. Please note that the check engine light may turn o...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,266.65
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 100 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning PorscheĀ® owner and offer unmatched performance, unparalleled qua...(choose a part on the right to read more)
General Fitment 911 1989-94
From $7,496.50
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|