PORSCHE 911 TURBO AIR PRESSURE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Silicone boost hose
Replacement boost hose eliminates common boost hose "blow outs" on modified turbo's.
Facts:
tested to withstand over 75 psi (5 bar) boost pressure.
fuel and oil resistant
temperature range between - 50 to + 180 degrees
bolt on kit
Over time the OEM hose tend to expand and contract under higher load, which leads to leaks, or "blow outs".
The hose is a bolt on.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 TURBO/GT2 2001-05
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
Bmc air filters are designed and produced to ensure a higher air flow than original paper filters. In f1, for example, bmc cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with bmc cotton air filter, produced using the same technology and materials as the f1 air filters, are evident.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09
From $207.76
Make a selection
Ksport procomp front big brake kit 15 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temper...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,104.00
Make a selection
Rear sport muffler reduces back pressure and offers improved sound and performance. High quality stainless steel available in both a polished and coated steel finish. TUV approved.
Tech tip: for older cars order repair-kit (FVD mk9 640 01).
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1989-94
$1,618.19
Make a selection
One of the most important upgrades for the Porsche 996, Cayenne turbo or panamera turbo is to replace the factory Bosch diverter valves. The factory valves are prone to leaking pressure under increased boost when the car has an upgraded ecu flash. As well, the factory Bosch valves will taper boost off with the diaphragm design even at stock boost levels. To help keep the boost pressure constant all the way to redline, upgrading the stock diverter valves to the agency power racing diverter valve kit will improve your cars overall performance.
These valves are cnc machined 6061 aluminum which have been precision engineered to fit with the stock or aftermarket f-hose and intake return hoses. The internal const...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 CAYENNE 2007-10 CAYENNE 2003-06
Agency power has developed these OEM boost recirculation valves (brvs) for the Porsche 997 turbo vtg turbochargers. like on the older 996tt, the stock valves use a rubber diaphram which will leak boost on the higher rpm. this part also deteriorates over time leading to boost failure. the new agency power brv uses a piston and spring design like our other popular diverter and blow off valves we have been producing since 2005. this design holds boost pressure all the way to redline and with the vtg design, helps boost come in stronger. the 997 vtg turbos have the valve mounted directly on to the turbocharger. to add this enhancement on the 997 turbo, agency power had to engineer a product that would be a fu...(choose a part on the right to read more)
General Fitment 911 2005-08
Ksport procomp front big brake kit 14 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperat...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,693.25
Make a selection
Adding bolt-on horsepower to the 997 turbo is a continuous quest by many enthusiasts looking for more power. reverting back to old tuning technologies, agency power has developed a larger throttle body and plenum kit for the Porsche 997 turbo to gain added performance. the point of a larger throttle body is to get in more air. The more air you bring in, the more power you make. The 997 turbo's engine intake system works off pulses, so how that air is diverted to either side of the engine is not as important as the volume incoming.
The plenum kit includes an OEM Porsche Cayenne turbo throttle body (part# 94860511503) which is a direct bolt on and plug in for the electronic throttle control with no modifica...(choose a part on the right to read more)
General Fitment 911 2005-08
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
Description
This high-efficiency long-neck sport intercooler increases the 930's cooling, airflow and performance across the rpm range. Long-neck term refers to an intercooler outlet tube connecting directly to the throttle body. The long-neck style intercoolers delete the original equipment air by-pass valve system (also known as the shuttle valve).
Features:
Replaces both the factory intercooler and boost by-pass housing.
Motorsport-quality tig welded aluminum-alloy cores.
Significantly reduced intake charge air temperatures and increased airflow.
Built and tested for factory-like fitment.
Triple supports provide secure mounting and sealing.
Each unit is flushed, pressure tested and certified to en...(choose a part on the right to read more)
General Fitment 911 1978-83 911 1984-86 911 1987-89
$2,945.80
Make a selection
Gruppe m cold air intake system Porsche 997 turbo 06-09
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped sp...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,764.88
Make a selection
Gruppe m ram air intake system Porsche 930 turbo 81-89
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped sp...(choose a part on the right to read more)
General Fitment 911 1978-83
$3,365.42
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
The intercooler cores used in this product are of the most advanced design currently produced anywhere in the world. These cores are manufactured by the aerospace company that is currently producing the majority of cooling for formula 1 cars and lead the way in automotive heat exchangers.
The plate and fin design that has been applied to these Porsche 997.1 turbo intercoolers has been designed to allow the minimum pressure drop while shifting the maximum amount of heat in to the received air flow.
Standard extruded tube intercoolers will give reasonable heat dissipation when the internal fin is packed on a vehicle of this power however this will always lead to a high pressure drop and as such not truly ai...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,354.70
Make a selection
FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $2,644.70
Make a selection
Ksport procomp front big brake kit 16 in. Rotor 8 piston caliper Porsche 996 twin turbo 99-04
Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications).
Ksports extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. Each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperat...(choose a part on the right to read more)
General Fitment 911 1998-05
$4,873.50
Make a selection
FVD Brombacher997.1 tt ?700 series? Upgraded turbos
Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,531.31
Make a selection
Continuing the process of building the ultimate Porsche 996tt, agency power has developed these highly engineered and proven silicone boost hose kits. Like any turbo charged vehicle, air needs to flow in the most efficient way to maximize performance. At a certain level, factory components will not produce the same results. Agency power's silicone boost hose kit replaces the 4 factory rubber boost hoses with these high quality and purpose driven silicone kit. The silicone hoses each have a precision cnc machined 6061 aluminum ends for a secure and direct fit into the factory or aftermarket intercoolers and intake manifold. Each machined aluminum part is barbed to give a secure fit and then the silicone is clam...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
Special intake hose kit for enhanced performance vehicles.
The original plastic tubes are restrictive on one side and have different lengths. Our reinforced suction hoses kit replaces the narrow and different lengths plastic tubes. This is a perfect homogeneous intake air guide from the intake manifold to the turbocharger and provides a smooth power delivery.
Design to withstand the vacuum pressure and will not collapse.
Made for the 993 GT2 racecars.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
FVD diverter valve is a direct replacement for the OEM valve. Comes in black only, not blue.
Prevents boost leaks and "recovers" quicker for better boost and throttle response.
Why replace the OEM diverter valve with an "FVD diverter valve"?
Under higher boost pressures the Bosch valve can start to leak (plastic housing). The plastic cover begins to lift off the sealing face as the internal spring's resistance is exceeded. Our diverter valve is made out of aluminum.
Between shifts or sudden throttle lift-off the compressor wheel is still spinning very fast and pumping air at the closed throttle plate, as well as placing strain on the intercooler, hoses and fittings. The diverter valve keeps air f...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94 911 1987-89 944 1985-88
Spec stage 5 clutch Porsche 964 3.3l turbo 91-92
What good is more horsepower if it isn_t transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more _bite_ while increasing reliability and performance.
App...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
From $1,029.95
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler, k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horse...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,571.48
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler, k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit, headers, 3.8l p/c, sport camshafts
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 449kw (610hp) @ 6750rpm
Max. Torque - 830nm(612lbf ft) @ 4500rpm
Max. Speed - 339km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.3s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of p...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$43,366.05
Make a selection
Kit includes:
Software fast load., sport air filter, sportmuffler (100 cell sport catalytic), k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,571.48
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|