PORSCHE 911 TURBO ENGINE TIN WARE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Loud, low, deep tones with exaggerated turbo whistling and sinister gurgling and crackling off throttle. By far the best sound you can get out of your turbo, not to mention being able to shoot flames! The only real drawback is the drone in the cabin which we try to minimalize by stepping down the diameter in 3 stages. - + 35 crank hp & + 25 crank torque - 3 tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage. - weighs 7 lbs. (3,1 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - bolts up to the turbochargers, replacing both the cats and the muffler. - reduces turbo lag and backpressure. - exhaust tips are not included! Stock tips will fit. - intoxicating grow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $444.40
Make a selection
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Ipd plenum's provide dyno proven results and are a simple and cost effective way to increase power. Want more pow...(choose a part on the right to read more)
General Fitment 911 1998-05
From $764.50
Make a selection
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Ipd plenum's provide dyno proven results and are a simple and cost effective way to increase power. Want more pow...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05
From $903.10
Make a selection
FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity,...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
From $1,342.00
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that opt...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Ipd plenum's provide dyno proven results and are a simple and cost effective way to increase power. Want more pow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,045.00
Make a selection
FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity,...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,334.30
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Stoptech big brake kit front drilled yellow caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
The 996 turbo 74mm competition plenum is designed to function with more seriously modified turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of turbos ranging from mildly modified to 1000+ hp. This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This competition turbo plenum will help modified 996 turbos achieve maximum engine performance.
The increased air flow and air speed develop by the larger plenum is designed to work with larger turbos, intercoolers, intake piping, high flow y pipes and more aggressive software. Horsepower gains start a...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,343.25
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product.
The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold.
The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher vel...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05
From $1,307.90
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- software performs flawlessly on your 95' and 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight fly...(choose a part on the right to read more)
General Fitment 911 1994-98
$3,294.50
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
Brombacher 997.2 tt "sport stock" (TUV version) muffler for OEM cats
Facts:
- + 6 crank hp & + 5 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 3 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:the 99...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,980.80
Make a selection
Product details:
High performance intercooler upgrade engineered for optimum flow efficiency lowers intake temperature and improves flow for maximum power gains
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-available for factory OEM turbo or upgraded k27 turbos
-increases horsepower and torque by 40 whp and 29 ft-lbs
-flow as much as 900 cfm @ 2.6/1 pr ratio with less than 1 psi drop
-cubic inch mass increase from 258 (oem) to 650
-c2 turbo long-neck style with no o-rings for a leak proof charge.
-intercooler kit includes bypass valve, bypass sleeve, rubber elbow, 5-ply silicone hoses, and all mounting ha...(choose a part on the right to read more)
General Fitment 911 1987-89 911 1984-86 911 1978-83 930 1975-77
$2,395.00
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler (100 cell sport catalytic), k24-race turbocharger l/r
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 397kw (540hp) @ 7000rpm
Max. Torque - 760nm (561lbf ft) @ 4500rpm
Max. Speed - 331km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally le...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$14,998.41
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|