PORSCHE 911 TURBO EXHAUST MUFFLER CLAM
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
The stock exhaust of the Porsche 997.2 turbo is very restrictive compared to aftermarket systems. Porsche does this to meet sound and emission purposes like most OEM manufacturers. agency power set out to create an exhaust system for the new Porsche 997.2 turbo 6speed or pdk that did not drone, would produced amazing performance, and under throttle give an incredible sound. we have accomplished this! the new agency power exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit.
With our single can muffler and 200cell high flow cats installed to the stock huge oval tips, we strapped our 2010 pdk to the dyno. The exhaust made a peak increase in standard mode of 15awhp and 23f...(choose a part on the right to read more)
$3,749.95
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,230.60
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat v...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$12,395.90
Make a selection
"brombacher" 996 tt (sound version) stainless steel exhaust system
Facts:
- + 30 crank hp & + 22 crank torque
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s sep...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,873.20
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2-rs.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest he...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $10,703.00
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
- + 12 crank hp & + 8 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 1.1 lbs. (0.5 kg)
- replaces OEM secondary muffler.
- t 304 stainless steel
- 40% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust.
- made in europe.
Tech tip: it's a good idea to replace your muffler and exhaust tip clamps & hardware with this upgrade. You can order our prepackaged 964 muffler installation kit comprised of genuine Porsche® parts, simply add part # FVD mk9 640 01 to your order.
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), ...(choose a part on the right to read more)
General Fitment 911 1989-94
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,980.80
Make a selection
This muffler is engineered for the discerning Porsche 930 turbo owner who is interested in pure unbridled power and sound. It is hand made from t 304 grade stainless steel. The sport muffler exudes a lower, deeper linear-firing-order dominated flat 6 Porsche turbo sound with added turbo whoosh and whistle. Dual angle cut 76 mm (3 inch) polished exhaust tips will look perfect on a 930 turbo s or a car with the turbo s rear valence. Each kit includes complete installation hardware. Features: gains of up to 10 hp more* t 304 stainless steel dual oval 3" (76 mm) tips for left and right side exit like the 930 turbo s mandrel bent tubing new gasket, clamps, hardware and brackets. Made in the usa by billy boat exhaus...(choose a part on the right to read more)
General Fitment 911 1970-73
From $1,070.60
Make a selection
This exhaust system is engineered for the discerning Porsche 965 turbo owner who is interested in pure unbridled power and sound. It is hand made from t 321 grade stainless steel. All piping is mandrel bent and the collector is a 41 mm (1 5/8 inch) diameter for reduced backpressure and increased performance. The sport muffler exudes a lower, deeper linear-firing-order dominated flat 6 Porsche turbo sound with added turbo whistle. Exhaust tips are 101 mm (4 inch) polished ovals with a rolled lip. Each kit includes complete installation hardware, gaskets, wastegate pipe, clamps and braided stainless oil lines. Features: gains of up to 30 hp more* t 321 stainless steel mandrel bent 41 mm (1 5/8 inch) collector lef...(choose a part on the right to read more)
General Fitment 911 1989-94
From $4,064.04
Make a selection
This sport muffler is engineered for the discerning Porsche 965 turbo owner who is interested in pure unbridled power and sound. It is hand made from t 321 grade stainless steel. All piping is mandrel bent for reduced backpressure and increased performance. The sport muffler exudes a lower, deeper linear-firing-order dominated flat 6 Porsche turbo sound with added turbo whistle. Exhaust tips are 76 mm (3 inch) polished ovals with a rolled lip. Each kit includes complete installation hardware, wastegate pipe and clamps. Features: gains of up to 10 hp more* t 321 stainless steel mandrel bent new wastegate pipe new gaskets new hardware new muffler clamps *dependent upon boost level and other modifications. Sold in...(choose a part on the right to read more)
$2,127.42
Make a selection
These stainless-steel muffler bypass exhaust tips offer an aggressive look and sound. They are perfect for those looking for a loud turbo sound with lots of turbo whistling. They are a cost-effective solution for additional top end horsepower at the track. They fill out the bumper cut outs nicely and save weight! Sold as a set (right and left). Specifications: angle cut. Polished stainless finish. 110 mm (4.3 inches) long x 88 mm (3.4 inches) tall weight: 2.0 kg (4.4 lbs.) sold as a set. 1 necessary per car. If you would like to update your exhaust tip clamps and hardware, please order the following: 2 qty. 92811124605 2 qty. 92811142700 4 qty. 90007425202 4 qty. FVD116929 2 qty. 99908405202 please note: these ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $275.00
Make a selection
+650hp 997 tt (sound version) stainless steel exhaust system
The +650 hp FVD sport exhaust system is specially designed for vehicles with performance increases of more than 485kw (650ps). Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 35 lbs. (16,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit. However, we do not recommend the use of stock ti...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,049.20
Make a selection
+650hp 997 tt (sound version) stainless steel exhaust system
The +650 hp FVD sport exhaust system is specially designed for vehicles with performance increases of more than 485kw (650ps). Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high d...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,864.23
Make a selection
- + 15 crank hp & + 12 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 20.0 lbs. (9.3 kg)
- replaces OEM primary muffler.
- t 304 stainless steel
- 20% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
- 3.5" x 4.5" (89x115 mm) oval exhaust tips included.
- made in europe and comes with German tÜv approval.
Tech tip: it's a good idea to replace your primary muffler clamps & hardware with this upgrade. You will also need to add our twin exhaust valence to accommodate the dual tips. FVD 559 00
General Fitment 911 1989-94
$1,217.48
Make a selection
Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added benefit is that ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $5,815.70
Make a selection
Brombacher titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
This system is complete from titanium because it is without any catalytic.
. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat value titanium available (1000 degrees celcius) and has a much greater wall thickness than 75% of the systems on the m...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$8,972.70
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 55 lbs. (25,0 kg)
- t 316 stainless steel for improved durability over t 304
- 92 db at idle and partial rpms(up to 60 mph) with valves closed, 100 db at wide open throttle with valves open.
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/10...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,655.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|