PORSCHE 911 TURBO GAS THROTTLE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
The 996 turbo 68mm version is designed to function with the factory 68mm throttle body that was OEM on all 996 factory turbos. The 68mm plenum delivers similar power as the larger 74mm competition plenum.
Horsepower gains range from 30 to 35 above the stock power band, and initial boost response is vastly improved. The ipd plenum delivers more power and more torque giving the 996 turbo a stronger mid range and top end. The 68mm plenum version is perfect for the turbo customer looking to improve engine performance on both stock and moderately modified turbos developing under 700 horsepower. The ipd 996 turbo plenum will truly transform the already impressive turbo performance. The plenum should be the firs...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,343.25
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
Loud, low, deep tones with exaggerated turbo whistling and sinister gurgling and crackling off throttle. By far the best sound you can get out of your turbo, not to mention being able to shoot flames! The only real drawback is the drone in the cabin which we try to minimalize by stepping down the diameter in 3 stages. - + 35 crank hp & + 25 crank torque - 3 tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage. - weighs 7 lbs. (3,1 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - bolts up to the turbochargers, replacing both the cats and the muffler. - reduces turbo lag and backpressure. - exhaust tips are not included! Stock tips will fit. - intoxicating grow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $444.40
Make a selection
FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product. The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity,...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
From $1,342.00
Make a selection
With the success of our ypipe kit on the 996tt and 997tt, we did a hybrid and built this new part to work with the OEM intake on the 997.2 turbo. Airflow restrictions can always hamper performance and power and this part like any other does that as well. Our ypipe kit has smooth mandrel 3inch bends from a 4inch collector that goes to the throttlebody. For fitment reasons, we then neck down to 2.25inches to fit on the stock boost hoses. We have incorporated all fittings/sensors that are required.
Going off our original baseline using our mustang awd on 91octane and about 90f temp, the car made 455awhp and 443ft/lbs of torque. We did these test in standard mode, not sport to see the linear gains. With the addi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,199.95
Make a selection
Agency power has just given Porsche 996tt owners another way to get an easy 20 bolt-on horsepower with this new big mouth plenum and throttle body kit. agency power set out to engineer and design a plenum that was functional, did not require additional tuning, and simply. Made power! the plenum is 6061 aluminum that retains the same shape as the factory t pipe. the reason to keep a standard t shape is that the engine works off of pulses. just like how Porsche designed, agency power kept this design and simply improved the restriction, the throttle body. the factory throttle body inlet size is 76mm that then jumps up to a 78mm id plastic plenum.
Agency power has chosen to use a 78mm Cayenne turbo thro...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has engineered to have a rich, deep tone in the lower rpms and a pronounced flat six note at higher rpms. With this new designed speedtech adds substantial horsepower and torque gains, along with improved throttle response are achieved with the free flowing, unrestrictive 70mm design. The 70mm tubing is utilized throughout, including the outlet pipes, which reduces back pressure and enables quick turbo response. The speedtech ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$3,233.25
Make a selection
Product details:
Great sports car sound with increased power and significant reduction in turbo lag
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-adds 15 whp for improved throttle response
-improved sports car sound with a much deeper, more aggressive exhaust note
-constructed with 3.0" 14-16 gauge t304l c.n.c. Mandrel bent stainless steel tubing for maximum performance and durability
-maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse tig welded with 2000 degree ceramic fiber and stainless steel wool packing.
-available in single or dual outlet configuration
...(choose a part on the right to read more)
General Fitment 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $1,395.00
Make a selection
The 996 turbo 74mm competition plenum is designed to function with more seriously modified turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of turbos ranging from mildly modified to 1000+ hp. This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This competition turbo plenum will help modified 996 turbos achieve maximum engine performance.
The increased air flow and air speed develop by the larger plenum is designed to work with larger turbos, intercoolers, intake piping, high flow y pipes and more aggressive software. Horsepower gains start a...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,343.25
Make a selection
Kit includes:
Software fast load, sport air filter, sport muffler set " brombacher" , mounting kit muffler, ipd with 82 mm throttlebody.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 294kw (400hp) @ 7500rpm
Max. Torque - 415nm @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to ou...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$6,339.41
Make a selection
FVD Brombacherhas a long tradition of offering high quality, extensively tested, easily installed tuning products that offer proven performance. Those high standards naturally led us to the innovative pro design (ipd) plenum product.
The ipd patented cast aluminum intake plenum with the larger 82 mm (gt3) throttle body (competition plenum) increases horsepower and torque by optimizing and increasing airflow into the intake manifold.
The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher vel...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05
From $1,307.90
Make a selection
Continuing on our modification path for the Porsche 997.2 turbo, agency power has just finished and released their new carbon fiber cold air intake kit. the carbon fiber airbox is a direct replacement for the OEM intake box. the airbox is made using a prepreg process which allows the entire airbox to be flawless from pulls. similar in shape to the OEM box for fitment, this carbon fiber unit features enlarged holes to fit dual K&N cone air filters. the 2x2 weave is finished in a gloss clear coat and sits nicely where the standard plastic box once was. These filters are pressed in through the rear of the intake box utilizing the rubber seal on the filter as a secure fit.
Each filter mates up to the factory...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,500.95
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat v...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$12,395.90
Make a selection
Adding bolt-on horsepower to the 997 turbo is a continuous quest by many enthusiasts looking for more power. reverting back to old tuning technologies, agency power has developed a larger throttle body and plenum kit for the Porsche 997 turbo to gain added performance. the point of a larger throttle body is to get in more air. The more air you bring in, the more power you make. The 997 turbo's engine intake system works off pulses, so how that air is diverted to either side of the engine is not as important as the volume incoming.
The plenum kit includes an OEM Porsche Cayenne turbo throttle body (part# 94860511503) which is a direct bolt on and plug in for the electronic throttle control with no modifica...(choose a part on the right to read more)
General Fitment 911 2005-08
Having the perfect sounding exhaust system that helps gain power is not the easiest task at hand. turbocharged cars do not need any backpressure and ideally perform best with no restriction off of the turbo exhaust outlet. however, this would cause your car to be incredibly loud and not comfortable for daily use. agency power has developed this exhaust system to give Porsche 997 turbo owners a race tone exhaust without the dreaded drone in the 2200-2800 rpm range. the muffler system is designed to keep noise level down inside the cabin but roar at full throttle. the exhaust features high flow 200 cell catalytic converters. the cats work with the factory o2 primary and secondary sensors to not throw a che...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,999.95
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2-rs.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest he...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $10,703.00
Make a selection
The stock exhaust of the Porsche 997.2 turbo is very restrictive compared to aftermarket systems. Porsche does this to meet sound and emission purposes like most OEM manufacturers. agency power set out to create an exhaust system for the new Porsche 997.2 turbo 6speed or pdk that did not drone, would produced amazing performance, and under throttle give an incredible sound. we have accomplished this! the new agency power exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit.
With our single can muffler and 200cell high flow cats installed to the stock huge oval tips, we strapped our 2010 pdk to the dyno. The exhaust made a peak increase in standard mode of 15awhp and 23f...(choose a part on the right to read more)
$3,749.95
Make a selection
Brombacher 997.2 tt "cat-back" (sound version) muffler for OEM cats
Facts:
- up to 25 crank hp & + 25 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 5 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:t...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Brombacher 997.2 tt "sport stock" (TUV version) muffler for OEM cats
Facts:
- + 6 crank hp & + 5 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 3 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:the 99...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 239kw (325hp) @ 7000rpm
Max. Torque - 370nm (273lbf ft) @ 4500rpm
Max. Speed - 287km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.9s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,833.10
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 232kw (315hp) @ 7000rpm
Max. Torque - 360nm (266lbf ft) @ 5000rpm
Max. Speed - 285km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.0s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management soft...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,205.60
Make a selection
High-quality performance headers provide better boost response and power throughout the rpm range
Features:
Fits all Porsche 997.2 turbo vehicles (2010-2012)
Improves power and throttle response
Saves 4 lbs from the rear of the vehicle
Features 3-into-1 high velocity merge collector
Reuse of factory OEM header gaskets is required.
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
General Fitment 911 TURBO/GT2 2010-13
$1,695.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|