PORSCHE 911 TURBO REAR MOUNT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.
Wrap around installation of the belts.
The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$1,017.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that opt...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
The harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev. Mar 95, motor vehicle seat belt anchorages-performance requirements.
The harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking.
Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
Strength requirements for ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
This kit adapts the 846 r1030 and 846 r1035 harness mounts to fit in the 996 GT2 and GT3. It features new strut tubes that are designed to go to the forward lap belt mounts, as these cars lack rear seat belt mounting points.
This kit bolts in to your GT2 or GT3 with no drilling, cutting or fabricating necessary.
Fits: GT3 rs, 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), turbo (07-09), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
Rear bumper center section race look for Porsche 964/965 turbo
- replaces the factory center section.
- gives your car a Porsche race look.
- made to be used with the factory rs license plate light.
- just like the factory piece this piece is made out of abs plastic ? No fiberglass!
- injection molded.
- a perfect finish makes painting this center section easy and inexpensive.
This center section fits your Porsche 911/964/965 turbo (all my) and gives you the option of replacing the factory center section with the famous race look piece.
The center section comes with the shadow gap in the bottom area of the center section so that it fits the rear lining. You can use the factory rs license plate li...(choose a part on the right to read more)
General Fitment 911 1989-94
From $399.00
Make a selection
Race seat mounting option for 996/997/986/987
This product offers a simple installation process and adjustment flexibility.
This assembly mounts to the floor and places your seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see 846r907xseries brackets). This entire assembly, including race seat, can be easily installed and removed as a single unit for race events.
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09),...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 2005-08 BOXSTER 1997-04
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
2 x Ø90mm end tips oval
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$10,794.30
Make a selection
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$9,235.60
Make a selection
Stoptech big brake kit front drilled yellow caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.
The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat belt anchorages-performance requirements...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$1,638.45
Make a selection
B&b lemans muffler exhaust w/ quad tips Porsche 996 tt 01-05
Billy boat performance exhaust has once again taken the lead in the exhaust aftermarket by designing a revolutionary t-304 stainless steel performance exhaust system specifically designed for the 2001-05 Porsche 996 twin turbo. Along with improving your Porsches increase in torque and horsepower, the b&b system is built for maximum exhaust flow to create a mellow, deep sound with no interior resonance. The lemans is a single muffler system that is very sporty in tone and performance. Includes sport quad tips that fit perfect in the rear valance.
Listen to the b&b exhaust here
45 rear wheel hp
Quad double wall tips
Direct replacm...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$6,213.35
Make a selection
B&b lemans muffler exhaust system Porsche 996 tt 01-05
Billy boat performance exhaust has once again taken the lead in the exhaust aftermarket by designing a revolutionary t-304 stainless steel performance exhaust system specifically designed for the 2001-05 Porsche 996 twin turbo. Along with improving your Porsche;s increase in torque and horsepower, the b&b system is built for maximum exhaust flow to create a mellow, deep sound with no interior resonance. The lemans system features a single transverse style muffler with 100 cell metal high flow cats and provides a deep, yet mellow exhaust note. In addition to increasing torque and horsepower the b&b exhaust system for the Porsche 996tt also offers impro...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,660.93
Make a selection
The FVD camber plate kit replaces the front and rear original rubber top strut mount bushings. We manufacture each camber plate and mount in Germany and machine each from a solid block of billet aluminum. Each is fitted with spherical bearings which allows a wide range of camber possibilities. This kit contains: 2 front camber plates 2 rear camber plates please note: this kit only works in conjunction with a pss9 / pss10 coil over (double spring) suspension in front and rear.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
From $1,204.50
Make a selection
Rs 1973 gfk ducktail
- production from OEM manufacturer
- highest quality standard
- perfect fitment
- light (9.9 kg) and stable
- fits all 911 models ( for 964 models you must use the brackets of the 964 turbo (965 512 019 00grv und 020 00grv))
Mounting points like factory, including all threads.
Fits: rs (92-92), only with 964 turbo brackets (965 512 019 00grv und 020 00grv) for the rear hood., c4 (89-94), c2 (90-94), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 2.7 (74-76), 911 2.7 (74-77), rs (73-73), 911s (70-73), 911tk (73-73), 911tv (72-73), 911te (72-73), 911e (70-73), 911t (70-71), 911l (68-68), 911s (67-69), 911e (69-69), 911t (68-69), 911 (65-68)
General Fitment 911 1989-94 911 1970-73
$1,527.57
Make a selection
This is the chrome fog light with red lens that mounts on the rear of the European 930 turbos.
General Fitment 912 1965-69 911 1965-69 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73
Roof skin for racing cars
- up to 30kg weight advantage (elimination sunroof)
- kevlar / carbon high polished
- adhesive mounting technology
Mounting:
Remove front and rear windows, detach roof trim left and right, drill out old roof, put new carbon roof on and glue with special adhesive technology, install front and rear windows, mount roof trim left and right.
Fits: GT3 r, 4l, 331kw (11-), GT3 rsr, 335kw (11-), 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 368kw (11-), 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 rs, 456kw (11-), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), Carrera GTS4, 300kw (12-), Carrera GTS2, 300k...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$2,507.09
Make a selection
We are an authorized reseller and installer of jrz suspension. As racing enthusiasts ourselves, we know that the best suspension for street or for track is by jrz. With years of engineering, race testing, and winning, jrz provide the driver with the best possible handling vehicle for their driving needs.
Jrzs double adjustment coilover is the ultimate in handling for the track and aggressive street driving. The double-adjustable shock allows external adjustment of both rebound and compression. In addition to the same precise and accurate rebound adjustment mechanism in the single-adjustable, the double-adjustable shock has a remote reservoir with the compression adjuster and gas volume. This reservoir is conne...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$13,905.00
Make a selection
B&b GT muffler exhaust system Porsche 996 tt 01-05
Billy boat performance exhaust has once again taken the lead in the exhaust aftermarket by designing a revolutionary t-304 stainless steel performance exhaust system specifically designed for the 2001-05 Porsche 996 twin turbo. Along with improving your Porsches increase in torque and horsepower, the b&b system is built for maximum exhaust flow to create a strong race inspired tone. The twin mufflers are for the more aggressive Porsche owner.
Listen to the b&b exhaust here
Up to 45 rear wheel hp
Uses oe tips or for an additional cost you can add the 996tt quad tips (fpor-2025). Please select below.
Direct replacment mount
This un...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,660.93
Make a selection
Roof skin for racing cars
- up to 30kg weight advantage (elimination sunroof)
- kevlar / carbon mat
- adhesive mounting technology
Mounting:
Remove front and rear windows, detach roof trim left and right, drill out old roof, put new carbon roof on and glue with special adhesive technology, install front and rear windows, mount roof trim left and right.
Fits: GT3 r, 4l, 331kw (11-), GT3 rsr, 335kw (11-), 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 368kw (11-), 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 rs, 456kw (11-), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), Carrera GTS4, 300kw (12-), Carrera GTS2, 300kw (10-), c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08
$3,518.90
Make a selection
Moton club sport damper system Porsche 996 turbo 01-05
The club sport line is designed for the serious club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you.
The club sport damper is double adjustable w...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,166.15
Make a selection
Moton club sport damper system Porsche 997 turbo 07+
The club sport line is designed for the serious club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you.
The club sport damper is double adjustable wit...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,168.50
Make a selection
Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 turbo 07+
The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height adjustm...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$11,765.24
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|