PORSCHE 924 THROUGH BOLT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Fiberglass wing that bolts to the rear hatch frame (no drilling through glass!)
General Fitment 924 1980-85 924 1986-88 944 1985-88 944 1989-91
These upgrades are bolt up and come with a 1 year warranty. Rebuildable turbocharger core required.
The bnr stage 1 consists of an upgraded compressor wheel and compressor housing. The factory turbine wheel is clipped to reduce back pressure. It also helps stabilize boost control and rotating assembly rpm. The stage 1 is rated for 300-330 rwhp in a properly tuned car. The rotating assembly is balanced and blueprinted. Turbo response is near to stock. The turbocharger upgrade is remanufactured and given a 1 year warranty through bnr supercars
General Fitment 944 1985-88 944 1989-91
$1,016.40
Make a selection
We offer offers 3 stages of turbocharger upgrades. All upgrades come with upgraded compressor housings and custom machined seal plates. These upgrades are bolt up and come with a 1 year warranty. Rebuildable turbocharger core required.
The bnr stage 2 consists of an upgraded compressor wheel and compressor housing. The factory turbine wheel is clipped to reduce back pressure. It also helps stabilize boost control and rotating assembly rpm. The stage 2 is rated for 330-350 rwhp in a properly tuned car. The rotating assembly is balanced and blueprinted. Turbo response is near to stock. The turbocharger upgrade is remanufactured and given a 1 year warranty through bnr supercars.
General Fitment 944 1985-88 944 1989-91
$1,118.04
Make a selection
This blower motor replaces part # 911 624 151 02, this later style blower motor only uses the late style hose, part # 93021103100 this is a quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request e...(choose a part on the right to read more)
View/Change Diagram
From $357.69
Make a selection
Sparco has worked for over 20 years with the top professional racing teams throughout the world. We have used this experience to create a new range of tuning and high performance products for the street and track. Our new steering wheels, pedal kits, shift knobs, and accessories have the quality and style that you have come to expect from sparco products. hub allows you to directly bolt on any of the sparco stering wheels.
General Fitment 911 1974-77 912 1965-69
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
On 356b/c models the rear bumper ends are bolted through the body into the fender brace. This support plate backs up against the body on the inside. One piece is required on each side.
View/Change Diagram
From $6.16
Make a selection
24 required per engine. These go on the crankcase main through bolts.
View/Change Diagram
From $3.53
Make a selection
This is the splined adjusting lug for the inside of the rear 914 caliper. it is easily removed by cocking a long 4mm allen wrench in it. it is located under the inner adjuster cover which may have an allen socket or a 10mm bolt head to remove. extra long for an easy reach. adjusted through the swing arm, the pads need to have 8 thousands clearance between the pad and the rotor, and check the rotor for warpage.
General Fitment 914 1970-76
We offer offers 3 stages of turbocharger upgrades. All upgrades come with upgraded compressor housings and custom machined seal plates. These upgrades are bolt up and come with a 1 year warranty. Rebuildable turbocharger core required.
The bnr stage 3 consists of an upgraded chra (center housing rotating assembly). This chra has the capabilities of over 400 rwhp in a properly modified car. The turbine and compressor wheels are upgraded and the center housing can come either water cooled or non water cooled. This unit will need minor fabrication for fitment on car. The thrust bearing is upgraded to 360 degrees. This is a great turbocharger for high boost applications. The rotating assembly is balanced/ bluep...(choose a part on the right to read more)
General Fitment 944 1985-88 944 1989-91
$1,270.50
Make a selection
The girodisc system is a direct replacement for the oe disc on all 996 GT2/gt3's. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency. The girodisc front rotors are approx 21.0 lbs vs. 25.6 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 1998-05
$1,620.00
Make a selection
Ipd intake plenum non e-gas Porsche 996 3.4l 98-99
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,208.25
Make a selection
Ipd intake plenum Porsche 996 3.4l 99-01
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upg...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,208.25
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $8,880.30
Make a selection
Front strut brace for Porsche 944 turbo, 944 turbo s, 944s2, 1989 944 2.7 liter. Each strut brace is designed using our specially designed extrusion for increased stiffness and properties to allow bending of the alloy without crimping at the bends or need to cut and weld multiple pieces (an inherently weaker design). This oval extrusion has an internal web design to increase its torsion and longitudinal rigidity during hard cornering thereby maintaining good tire contact with the ground and restricting the spreading of the shock towers during this high stress.
All components are tig aircraft quality welded. No weak swivel joints that reduce torsion stiffness. Our movable joint is approximately a 2" bolt and...(choose a part on the right to read more)
General Fitment 944 1989-91 944 1985-88
Ipd intake plenum Porsche 996 3.6l 02-04
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upg...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,208.25
Make a selection
This spacer tube is installed at each end of the rear bumper on 356b/c models. The bolt from the fender bracket goes through the spacer and into the end of the bumper.
View/Change Diagram
From $9.24
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers and longer bolts. Girodisc rotor is slightly larger than the OEM rotor at 340mm versus 317mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 911 1998-05 911 2005-08
$1,485.00
Make a selection
Ipd intake plenum Porsche 997 3.6l 05+
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upgra...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,208.25
Make a selection
Ipd intake plenum Porsche 997 s 3.8l 05+
The ipd plenums are a unique design that dramatically increases horsepower and torque by optimizing air flow efficiency. Air flow is managed through a diversion splitter that maximizes air speed into the engine. The charged intake air maintains a higher velocity by replacing the factory plastic "t" intake with a stronger and more efficient cast aluminum "y" design. This unique "y" style plenum optimizes flow, improving acceleration and boost response. The new ipd replacement plenum eliminates the turbulent air flow by smoothly splitting and diverting the air flow and directing it towards the cylinders at a much higher air speed. This simple bolt-on plenum upg...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,208.25
Make a selection
The girodisc system is a direct replacement for the oe disc. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the dis...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,350.00
Make a selection
The girodisc system is a direct replacement for the oe disc on all 997.2 GT3/gt2's, with or without the OEM pccb rotors. No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 GT3 2007-11 911 TURBO/GT2 2010-13
$1,620.00
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$7,854.00
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|