PORSCHE 964 FROS LIGHT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
From $108.90
Make a selection
German lightweight sliverknit rear seat delete / rear shelf carpet that was used on the 964 and 993 rennsport models. We go to extra lengths to ensure that our carpets are made as closely to the originals as possible. Each carpet is made with original lightweight German sliverknit and are trimmed in vinyl. Each is cut, sewn and trimmed to fit perfectly. Made in Germany. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,151.70
Make a selection
The discs rigid hub with organic friction material has superior thermal resistance, is more resistant to higher rpm's than the oe discs, offers greater longevity and is able to transmit higher torque (370 ft/lbs. / 500 nm max.). It is an ideal kit for lightly modified street or light use track cars. Clutch kit is made in Germany and includes: 1 qty. Clutch disc (zf sachs race engineering, gmbh) 1 qty. Pressure plate (zf sachs race engineering, gmbh) 1 qty. Release bearing 1 qty. Spline lubricant 9 qty. Pressure plate screws kit weighs 13 lbs. (6 kg) tech tip: when you are planning to install a new clutch, it is a good idea to replace the clutch release fork and shaft to ensure proper clutch engagement. Our par...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 GT3 2003-05 911 1994-98 911 1989-94
From $1,144.17
Make a selection
Product details:
Replaces blower motor assembly and ductwork while allowing plenty of heat; replicated from factory rs part
Features:
-fits all 964 Carrera vehicles (1989-1994)
-saves 8 lbs from rear of vehicle
-replica of the Porsche rs lightweight factory heat duct
-factory Porsche part is roto-formed plastic with parting lines where as the fabspeed rs heater pipe is genuine carbon fiber.
-replaces blower motor assembly/ductwork and still allows heat in the cabin.
-improves aesthetic value with clear coated carbon fiber tube.
-easy 20 minute diy install
-all fabspeed performance products are backed by the fabspeed lifetime limited warra...(choose a part on the right to read more)
General Fitment 911 1989-94
For all cars running the single mass flywheel and European rs models. Use with guide tube part # 100105292 for Porsche 993 rs and Porsche 996 GT3 part fits only for clubsport and cup type with lightweight rs flywheel . Fits: 964rs / 968 -95 / 993rs + 996 GT3 and 997 GT3 only for clubsport version (m003) please note: please check the model fitment tab to ensure accurate fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $198.65
Make a selection
Schnell front strut bar Porsche 964 89-94
The absolute highest quality, performance increasing products available for your Porsche.
Features:
-cnc aluminum strut rod
-beautifully anodized
-billet aluminum strut mounts
-crisper more precise handling
-very lightweight
-direct bolt-on
-installs in minutes
General Fitment 911 1989-94
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$7,854.00
Make a selection
Endless ewig n35s racing front brake pads Porsche 964 turbo 91-92
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal and the...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
Endless ewig n35s racing rear brake pads Porsche 964 turbo 91-92
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal and then...(choose a part on the right to read more)
General Fitment 911 1989-94
Gruppe m ram air intake system Porsche 964 Carrera 88-93
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped ...(choose a part on the right to read more)
General Fitment 911 1987-89
$2,175.08
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
Product details:
The ultimate lightweight aluminum strut bar reproduced exactly as used by the Porsche motorsport ag on the 800 hp 993 tt GT2 evo
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-stiffens front suspension for improved handling and turn-in
-direct bolt-on installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1989-94
Product details:
Improved sports car sound; deep and throaty while maintaining street appropriate volume
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-1994
-increased throttle response throughout the rpm range with less restrictive mufflers
-available in either a single or dual outlet configuration
Note: requires slight modification to the factory rear bumper for proper fitment of the second outlet
-constructed from high-quality 14-16 gauge cnc mandrel-bent t304l stainless steel for optimum flow and maximum durability
-direct bolt-on replacement for the restrictive factory mu...(choose a part on the right to read more)
General Fitment 911 1989-94
From $1,195.00
Make a selection
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-199
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all r...(choose a part on the right to read more)
General Fitment 911 1989-94
From $2,795.00
Make a selection
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-199
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all r...(choose a part on the right to read more)
General Fitment 911 1989-94
From $3,795.00
Make a selection
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-1994
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all ...(choose a part on the right to read more)
General Fitment 911 1989-94
From $3,795.00
Make a selection
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-199
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all r...(choose a part on the right to read more)
General Fitment 911 1989-94
From $2,595.00
Make a selection
Product details:
Replaces blower motor assembly and ductwork. Perfect for summertime drivers education and club race cars
Features:
-fits all Porsche 964 Carrera vehicles (1989-1994)
-saves 10 lbs from rear of vehicle
-exact replica as used by the Porsche motorsports for factory lightweight 964 cup and 964 rsr race cars.
-replaces blower motor assembly and ductwork.
-cleans up engine bay for easier access
-simple diy installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1989-94
From $85.00
Make a selection
Product details:
Replaces blower motor assembly and ductwork while still allowing plenty of heat, just like the factory rs part
Features:
-fits all Porsche 993 vehicles (1994-1998)
-saves 9 lbs from the rear of the car
-full carbon fiber construction
-simple diy installation
-this a replica of the Porsche Germany rs lightweight factory heat duct that was used on all 3.6 liter special rs lightweight race cars.
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note:
All late model 993's, 1996-1998 require the Porsche factory 964 fan shroud, part # 96410640302
General Fitment 911 1994-98
The discs rigid hub with organic friction material has superior thermal resistance, is more resistant to higher rpm's than the oe discs, offers greater longevity and is able to transmit higher torque (370 ft/lbs. / 500 nm max.). It is an ideal kit for lightly modified street or light use track cars. Clutch kit is made in Germany and includes: 1 qty. Clutch disc (zf sachs race engineering, gmbh) 1 qty. Pressure plate (zf sachs race engineering, gmbh) 1 qty. Release bearing 1 qty. Spline lubricant 9 qty. Pressure plate screws kit weighs 13 lbs. (6 kg) tech tip: when you are planning to install a new clutch, it is a good idea to replace the clutch release fork and shaft to ensure proper clutch engagement. Our par...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 GT3 2003-05 911 1994-98 911 1989-94
From $1,243.90
Make a selection
"brombacher" catalytic bypass pipe for 964 89-94
- + 15 crank hp & + 13 crank torque
- 2 3/4" tubing (70 mm) straight through design for max. Power
- weighs 3.3 lbs. (1,5 kg)
- t 316 stainless steel for improved durability over t 304
- made in Germany
- dme programming necessary.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resis...(choose a part on the right to read more)
General Fitment 911 1987-89
Product details:
The ultimate light weight aluminum strut bar reproduced exactly as used by the Porsche motorsport ag on the 800 hp 993 tt GT2 evo
Features:
-fits all Porsche 964 Carrera vehicles (1989-1994)
-accurate reproduction of Porsche motorsport 993 GT2 evo strut bar
-stiffens front suspension for improved handling and turn-in
-direct bolt-on installation, no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1989-94
Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. - fits all 964 narrow body models - left and right side exits for exhaust please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. If you do not have the rs license plate light please also order 91163162004
This item may need to be sourced...(choose a part on the right to read more)
General Fitment 911 1989-94
From $1,791.90
Make a selection
Replacing your pressure plate? Take a look at this lightweight model, a savings of over 11 lbs for some models. Made by zf sachs to original specifications for all 964 / 993 and 968 naturally aspirated models. Direct replacement for the oe pressure plate. 240 mm. 3100-3300 lb. Clamp load. Weighs: 9.5 lbs. (4.3 kg) installation notes for those using single mass flywheels: when installing a new pressure plate, be sure to add 9 qty. Pressure plate pan head bolts, our part # 90006710301 and 1 qty. Starter ring gear 96411414331.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98 968 1992-95 911 1989-94
From $581.90
Make a selection
This heater blower bypass tube was originally used on the rennsport and cup models to save weight. It is made of lightweight, polished carbon / kevlar. Please note: for the 993's from 1996+ you must also purchase and additional air duct, part # 96410640302 looking to add more carbon to your engine bay, take a look at our carbon air duct for the intake, part # FVD211343 sold individually. 1 necessary per car. Installation note: this tube snaps inside part # 96410640302. If 96410640302 is very old and has lost its elasticity then fitment can be an issue. We recommend adding qty. 1 of part # 96410640302 in this instance.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ord...(choose a part on the right to read more)
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|