PORSCHE 986 CHARGE O MAT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity)...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Designed to prolong the life of your turbocharger, this greddy turbo timer allows your Porsche to idle the engine for a timed period, with the ignition key removed. This conveniently allows the engine oil and turbo center cartridge to cool down properly and prolong turbo and oil life. The run time can be programmed by the user or utilize it’s “full auto mode”, which estimate the driving rpm according to the vehicle’s alternator signal and then recommend a count down time. To prevent theft, the unit includes a parking brake and speedo hook-up which disengage operation if there is an attempt to move the vehicle without the key. The unit also includes a stopwatch/lap timer and attack modes along with a bui...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 944 1989-91 944 1985-88
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. For even greater gains we have packaged the ipd plenum with larger throttle bodies. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Combining the ipd plenum (75 m...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $1,232.00
Make a selection
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Kit includes:
Software dme exch., sport air filter
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
This exact duplicate of the factory original 944 spoiler is reinforced where the original was weak and is made from the latest in poly technology. save thousands over the factory original and restore the beauty to your front end. easily painted to match, make sure you add the flex agent to the paint before applying.
Oversized shipping charge will apply.
View/Change Diagram
From $599.00
Make a selection
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Kit includes:
Software dme, sport air filter, sport header system.
Some models require oxygen sensor relocation.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche® engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche® engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importantly reliability.
Here is a small sample of our software advancements versus what is available on the market?
FVD software vs. The competition
- software programming can be done in the comfort and privacy of your own home or by one of our recommended dealers.
- you receive the FVD software file and the original (oem) software file f...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,584.70
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter, sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 178kw (242hp) @ 6500rpm
Max. Torque - 290nm (214lbf ft) @ 5000rpm
Max. Speed - 261km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,901.90
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,861.00
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 173kw (235hp) @ 6500rpm
Max. Torque - 280nm (207lbf ft) @ 4750rpm
Max. Speed - 257km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system and sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 206kw (280hp) @ 6400rpm
Max. Torque - 345nm (254lbf ft) @ 4900rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,205.30
Make a selection
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
Please note: this dme cannot be flashloaded. Dme must be sent to us.
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfec...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,094.50
Make a selection
Using their race winning technology, the jrz rs coilover suspension is designed for the performance enthusiast who will be driving their vehicle on the street, and on the track. The jrz rs has solid support for roll and pitch with a smooth high speed compression blow-off and rebound to make the ride super smooth. Each adjustment makes a significant change in the dampers characteristics, allowing the driver to get the car tuned to their preference.
Every jrz rs damper is tested and matched on the dyno prior to shipping. As with all jrz suspensions, the jrz rs is made with the highest quality aerospace materials and manufactured to the highest aerospace standards.
Features:
Secure double adj...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08
$7,060.50
Make a selection
Using their race winning technology, the jrz rs coilover suspension is designed for the performance enthusiast who will be driving their vehicle on the street, and on the track. The jrz rs has solid support for roll and pitch with a smooth high speed compression blow-off and rebound to make the ride super smooth. Each adjustment makes a significant change in the dampers characteristics, allowing the driver to get the car tuned to their preference.
Every jrz rs damper is tested and matched on the dyno prior to shipping. As with all jrz suspensions, the jrz rs is made with the highest quality aerospace materials and manufactured to the highest aerospace standards.
Features:
Secure double adj...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$7,060.50
Make a selection
When rebuilding, the deepest part of the engine always needs special attention. A precisely matching, crack-check and balanced crank is the solution to the highest oil pressure, least vibration and longest life. Order matched bearings for a precise fit. There is a core charge, which is refundable upon receiving your rebuildable part.
General Fitment 914 1970-76
From $391.50
Make a selection
When rebuilding, the deepest part of the engine always needs special attention. A precisely matching, crack-check and balanced crank is the solution to the highest oil pressure, least vibration and longest life. Order matched bearings for a precise fit. There is a core charge, which is refundable upon receiving your rebuildable part.
General Fitment 914 1970-76
The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.
The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.
The clutch masters fx350 system:
Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
Using their race winning technology, the jrz rs coilover suspension is designed for the performance enthusiast who will be driving their vehicle on the street, and on the track. The jrz rs has solid support for roll and pitch with a smooth high speed compression blow-off and rebound to make the ride super smooth. Each adjustment makes a significant change in the dampers characteristics, allowing the driver to get the car tuned to their preference.
Every jrz rs damper is tested and matched on the dyno prior to shipping. As with all jrz suspensions, the jrz rs is made with the highest quality aerospace materials and manufactured to the highest aerospace standards.
Features:
Secure double adj...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,682.50
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|