Vehicles
15 not categorized PORSCHE 986 OIL LINE KITCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.FVD211328ANB
$434.50
Make a selection SIC10734800 Due to occasional oil seepage, the right side tensioner oil supply line has been modified, also, both left and right oil line are now installed with an additional bracket on the chain housing cover. This kit includes the updated right supply line, both brackets, clamps & screws. Fits all cars with oil fed tensioners. General Fitment930 1975-77911 1974-77 911 1970-73 911 1965-69 911 1978-83
$104.50
Make a selection 901107710S Manufactured by the original supplier for Porsche, this three piece oil line kit instantly solves the long search for th e proper oil lines for your six.
$503.50
Make a selection AFC11957 A necessary addition for any 911! This kit includes substitute 30% larger 310 matrix (14"h x 6"w x 2"d) 19 row oil cooler in a factory "hard line" equipped car. This kit is especially good for replacing the factory "loop" oil device located in the front right fender, making it easy to upgrade to a mocal oil radiator at an economical price. Includes the cooler, two 90 degree 3/4 fittings, two 30 mm straight fittings, and a 3/4 oil hose. this is larger than out basic oil cooler kit. Note: for car that already have a factory oil cooler. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$475.00
Make a selection 935FSUSP This light weight, bolt in kit replaces the factory front suspension arms, cross-member, and rubber bushings when converting to a coil over front suspension system. General Fitment911 1965-69911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76
$1,850.00
Make a selection AFC11956 A necessary addition for any 911! This kit includes the components to install a mocal 19 row, 235 matrix (11"h x 6"w x 2"d) oil cooler in a factory "hard line" equipped car. This kit is especially good for replacing the factory "loop" oil device located in the front right fender, making it easy to upgrade to a mocal oil radiator at an economical price. Includes the cooler, two 90 degree 3/4 fitings, two 30mm straight fittings, and a 3/4 oil hose. This is our basic oil cooler kit. Note: for car that already have a factory oil cooler. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$423.50
Make a selection FVDIDA46 Complete carburetion kits ! General Fitment911 1965-69911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$10,363.66
Make a selection 930105911912 If you have an early 911 or 914-6 you can upgrade to the 1984-89 911 Carrera oil pressure fed tensioner system will prevent engine damage from collapsed chain tensioners. The kit includes 2 chain housing covers, 2 oil lines, 2 tensioners, and fittings needed to complete installation. Some special tools required. Call for details. General Fitment911 1965-69911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76
From $1,098.00
Make a selection AFC11958 A necessary addition for any 911! This kit includes the components needed to install a mocal 44 row 115 matrix oil cooler in cars with factory "hard line" plumbing. This kit is perfect for upgrading existing factory coolers to the more efficient mocal oil radiator. Includes the cooler, two metric x am adaptor, two straight -12am fittings, one 45 degree -12am fitting, one 90 degree -12am fitting, and two -12am stainless streel hoses. This is the biggest oil cooler kit we offer for the fender of a 911. Note: for car that already have a factory oil cooler. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$549.95
Make a selection FSPOR911TSPKGD Product details: General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection FVDIDA50 Complete carburetion kits ! General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98
$10,902.10
Make a selection GT2DUCS Brakes slow your car by turning friction into heat, help remove more of that heat! These are the largest brake cooling ducts available for street use, they come from the European 911 GT2. A two piece duct, consisting of a hard plastic securing base, and a more flexible scoop on the bottom. On some applications, the wheel well liner or duct may have to be modified due to their large size. These are the largest air ducts available for a street car and they fit '98-and-up 911, and all Boxster and Cayman. Note- you need to be running a 18" or larger wheel with these ducts. General FitmentBOXSTER 1997-04911 2005-08 911 GT3 2007-11 911 GT3 2003-05 911 TURBO/GT2 2001-05 BOXSTER 2005-08 911 1998-05
$425.96
Make a selection 10021103000 This heat exchanger is engineered for the discerning Porsche 911 3.2 l owner looking for more performance. These are manufactured in stainless steel by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Features: gains of +10 hp and +10-15 tq stainless steel 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" connects "early style" dual inlet mufflers bolt on replacement for the right side re...(choose a part on the right to read more)
$1,733.60
Make a selection 100211025SSUSA If you have a us model 1980-83 911 SC and are looking to replace your heat exchangers we have some good and bad news. The original heat exchangers (part # 930 211 025 02) are no longer available from Porsche. But, these stainless-steel industries (ssi) heat exchangers will work with modifications. The good news is, once done, you will have more torque and horsepower! Free flow conversion heat exchangers improve sound and performance, while reducing backpressure and thermal load on the motor. These are based off the early style exhausts found on the 1974 2.7 l rs. Those models had a straight through, superior, free flow exhaust design that included a dual inlet muffler. When converting to these heat exchangers y...(choose a part on the right to read more)
$2,863.30
Make a selection 10010303204 - 3.2 l for increased horsepower and torque.* - genuine mahle forged pistons with deeper valve pockets. - genuine mahle steel (st52) nikasil coated cylinders.** - piston pin bore is off center (deaxiated) for factory quiet operation. - 10.3:1 compression. - 98 mm big bore. - 22x58 racing wrist pins - 70.4 stroke. - made in Germany by mahle gmbh. - piston rings installed directly on the pistons for ease of installation. - complete set with cylinders, pistons, rings, wrist pins and clips. - kit weighs 21.03 lbs. (9.54 kg). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resista...(choose a part on the right to read more)
$9,693.51
Make a selection 100211030SSI This heat exchanger kit is engineered for the discerning Porsche 911 3.2 l owner. Ssi heat exchangers are made from superior t 304 grade (18% cr, 8%+ ni) stainless steel. Ssi has become an industry standard for Porsche 911 heat exchangers due to the exceptional materials, craftsmanship and durability. This is critical when considering heat exchangers, as exhaust leaks caused by poor materials can lead to carbon monoxide entering the cabin via the heating system. Features: gains of +10-15 hp and +10-20 tq t304 stainless steel (18% cr, 8%+ ni) 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" includes o2 sensor socket connects "early style" dual inlet mufflers bolt on replac...(choose a part on the right to read more)
$2,961.20
Make a selection 106085 Ims solution. Solid bearing replacement with oiling system. General FitmentBOXSTER 2005-08BOXSTER 1997-04 911 1998-05
$1,756.89
Make a selection 10021102900 This heat exchanger is engineered for the discerning Porsche 911 3.2 l owner looking for more performance. These are manufactured in stainless steel. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Features: gains of +10 hp and +10-15 tq stainless steel 1.5" pipe diameter for backpressure reduction 21.5 mm thick flange with "fire ring" connects "early style" dual inlet mufflers bolt on replacement for the left side reduces the ...(choose a part on the right to read more)
$1,361.80
Make a selection 35271224 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 GT3 & rs 07+ General Fitment911 GT3 2007-11
$11,481.74
Make a selection 170910242 Dansk stainless steel race headers produce dyno proven horsepower and torque as well as a phenomenal sound! They feature equal length, mandrel bent tubing and a motorsport merge collector to further improve exhaust gas flow, reduce back pressure and optimize exhaust gas scavenging. These are a quality tuning product manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. Features: +15 hp and +14 tq ga...(choose a part on the right to read more) General Fitment911 1970-73
From $2,757.10
Make a selection 19271254 With the hls lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the hls lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm. General FitmentCAYMAN 2009-12
$6,014.24
Make a selection BAT006 Many pre. 1977 Porsche 911's are not equipped with factory oil plumbing (hard lines and thermostat). In this case fitting an oil cooler requires making a hose run from the rear to the front of the vehicle and back. We find the easiest and most cost effective method of plumbing is to duplicate the factory plumbing route using aeroquip hose and fittings with a mocal oil thermostat and oil cooler. The various kits that we offer to accomplish this task include; one of a number of oil cooler options (some are suitable for both fender or front spoiler location), mocal -12 an oil thermostat with mounting bracket, 30 foot length of aqp -12 an stainless braid 3/4" id hose, 30mm metric to -12 an adaptors for the oil ta...(choose a part on the right to read more) General Fitment911 1974-77911 1965-69 911 1970-73
$1,179.45
Make a selection 35271038 The kw suspension variant 3 coilover system is state-of-the-art technology derived from motorsports competition for a more precise performance on the road. The separate and independently adjustable rebound and compression dampening allows for individual suspension setups with different uses and preferences. The unique patented system with its two-stage valves allows a rebound dampening adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range, while the high-speed range which controls the driving safety, is fixed. General Fitment911 2005-08
$4,927.49
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |