PORSCHE 987 HIGH TORQUE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
More air = more power!
Ipd plenum?s patented, cast aluminum ?y? Style plenum increases horsepower and torque by optimizing airflow into the intake manifold.
The factory plastic ?t? Style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds ?y? Style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles).
Ipd plenum?s provide dyno proven results and are a simple and cost effective way to increase power.
Want mo...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
Spec stage 5 clutch Porsche 911 3.2l Carrera c2 clubsport 87-89
What good is more horsepower if it isn_t transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more _bite_ while increasing reliability and performan...(choose a part on the right to read more)
General Fitment 911 1987-89
From $949.95
Make a selection
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. For even greater gains we have packaged the ipd plenum with larger throttle bodies. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Combining the ipd plenum (74 m...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
From $1,230.90
Make a selection
"brombacher" 987/s (sound version) stainless steel exhaust system
Facts:
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts a...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$7,617.50
Make a selection
"brombacher“ 987/s (sound version) stainless steel exhaust system
Facts:
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
General Fitment BOXSTER 2005-08
$7,617.50
Make a selection
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- ecu software / programming is necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow r...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$7,475.60
Make a selection
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- ecu software / programming is necessary.
Please note: for cars that do not have a valved system you must add our part number bes kls 000 001. In addition you must add FVD 331 987 00 for cars with headlamp leveling, typically found on u.s. Cars.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are eng...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,657.00
Make a selection
Gruppe m ram air intake system Porsche 964 Carrera 88-93
The gruppem ram air intake system was created to improve efficiency by reducing the restrictions of a stock intake. A factory intake system is designed to minimize cost and reduce noise within the cabin, but these tradeoffs also sacrifice performance. To increase efficiency and power, gruppem has worked to reduce restriction and decrease the intake air temperature. Colder air is denser allowing the intake system to move a larger volume of air and in turn make more power. The shape of the duct and filter are designed specifically to increase the velocity of the air and increase the pressure, while at the same time fitting within engine bays cramped ...(choose a part on the right to read more)
General Fitment 911 1987-89
$2,175.08
Make a selection
Product details:
High performance intercooler upgrade engineered for optimum flow efficiency lowers intake temperature and improves flow for maximum power gains
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-available for factory OEM turbo or upgraded k27 turbos
-increases horsepower and torque by 40 whp and 29 ft-lbs
-flow as much as 900 cfm @ 2.6/1 pr ratio with less than 1 psi drop
-cubic inch mass increase from 258 (oem) to 650
-c2 turbo long-neck style with no o-rings for a leak proof charge.
-intercooler kit includes bypass valve, bypass sleeve, rubber elbow, 5-ply silicone hoses, and all mounting ha...(choose a part on the right to read more)
General Fitment 911 1987-89 911 1984-86 911 1978-83 930 1975-77
$2,395.00
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection
Product details:
Dramatically improve sports car sound and throttle response with upgraded maxflo mufflers and inlet tubing; includes deluxe outlet tip
Features:
-fits all Porsche 944 turbo 951 vehicles (1985-1991)
-increases horsepower and torque by 26 whp and 29 ft-lbs
-saves 20 lbs from factory muffler system
-constructed from high quality 14-16 gauge cnc mandrel-bent t304 stainless steel for maximum performance and durability
-noticeable improvement in sports car sound and throttle response
-direct replacement for the OEM muffler with no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime lim...(choose a part on the right to read more)
General Fitment 944 1985-88 944 1989-91
$1,490.35
Make a selection
Product details:
Dramatically improve sports car sound and throttle response with upgraded maxflo mufflers and inlet tubing. includes deluxe bolt-on tips in polished or black finish, or Carrera GT style tips
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-available with polished or black chrome deluxe dual-style tips or Carrera GT style tips
-improves horsepower and torque by 5 whp and 4 ft-lbs
-complies with emissions regulations
-does not trigger check engine light
-constructed from high quality 14-16 gauge cnc mandrel-bent t304 stainless steel for maximum performance and durability
-noticeable improv...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $2,350.00
Make a selection
Product details:
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-includes German-imported 200-cell hjs sport catalytic converters for maximum performance
-constructed from equal-length t304 stainless steel c.n.c. Mandrel-bent tubing for improved torque and equalized engine pulsing
-more power and torque across the rpm band and dramatically improved sports car sound
-composite gaskets are included for a leak proof seal
-direct replacement for the OEM headers with no cutting or welding ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $2,895.00
Make a selection
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
Hp plus brake pad compound is ideal for autocross and track day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. Hp plus utilizes a unique ferro-carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, solo ii and “track day” applications. The ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. All hawk hp plus / autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.
General Fitment 968 1992-95 928 1983-86 928 1987-91 911 1989-94 911 1994-98
Hp plus brake pad compound is ideal for autocross and track day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. Hp plus utilizes a unique ferro-carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, solo ii and “track day” applications. The ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. All hawk hp plus / autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.
General Fitment 911 1987-89 911 1989-94 911 1994-98 928 1992-95 928 1987-91 928 1983-86 944 1985-88 944 1989-91 968 1992-95 930 1975-77 911 1974-77 911 1970-73
Hp plus brake pad compound is ideal for autocross and track day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. Hp plus utilizes a unique ferro-carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, solo ii and “track day” applications. The ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. All hawk hp plus / autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.
General Fitment 911 1970-73 911 1974-77 911 1978-83 911 1984-86 911 1987-89
"m&m edition" sport headers with 200 hjs "hf" sport cats
Our m&m edition headers and cats were created for those who have already purchased the FVD / m&m sport mufflers (either TUV or sound version). They are a logical progression for those looking for added mid range torque and top end horsepower. Combined with the FVD / m&m muffler they offer just as much power as the FVD / m&m complete exhaust system.
Facts:
- + 20 crank hp & + 19 crank torque
- 2" tubing (50 mm) straight through design for max. Power
- 200 cell hjs tri metal high flow cats ("hf" cats)**
- weighs 12.6 lbs. (5.7 kg)
- 26 lb weight savings over complete OEM exhaust system!
- t 316 stainless steel for improved durability over...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
$4,365.90
Make a selection
Hp plus brake pad compound is ideal for autocross and track day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. Hp plus utilizes a unique ferro-carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, solo ii and “track day” applications. The ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. All hawk hp plus / autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.
General Fitment BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05 911 1994-98
Hp plus brake pad compound is ideal for autocross and track day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. Hp plus utilizes a unique ferro-carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, solo ii and “track day” applications. The ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. All hawk hp plus / autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.
General Fitment 924 1986-88 944 1985-88 944 1989-91 928 1978-82
Spec stage 2+ clutch Porsche 911 3.2l Carrera c2 clubsport 97-89
What good is more horsepower if it isn_t transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more _bite_ while increasing reliability and performa...(choose a part on the right to read more)
General Fitment 911 1987-89
From $849.95
Make a selection
The all new specifically designed ipd 2.9l dfi Boxster/Cayman plenum is a direct bolt-on upgrade utilizing all pre-existing factory hardware including factory 74mm throttle body. The improved ipd intake design allows for smoother, less turbulent and more efficient air flow with higher velocity air intake speed creating impressive power and torque gains.
The superior design of the dfi ipd plenum provides additional horsepower. Unlike previous naturally aspirated ipd plenums that delivered stronger gains in the mid range, the new ipd dfi plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline. Power and torque are realized in the midrange and cont...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,095.95
Make a selection
The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the almost 40 years the 911 has been on the road. For one, the rubber suspension bushings that monoballs replace are most likely already worn out or cracked from decades of use.
Why not replace them with stock rubber bushings? Most 911 owners today, especially those of us who take our cars to the track, have equipped our Porsches with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, rubber suspension bushings are compressed and flexed by the extreme loads being put on them, defeating your car's finely...(choose a part on the right to read more)
General Fitment 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
The spec 3+ clutch is the flagship stage for a high powered street or race car that requires a manageable and friendly engagement, the stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability.
Torque capacity: 775ft/lbs
Spec 3+ clutches are great for street, drag, drift, autocross, road racing, pulling, rallye and drift events.
General Fitment 928 1987-91
$1,229.95
Make a selection
The all new specifically designed ipd 3.4l dfi Boxster s/Cayman s plenum is a direct bolt-on upgrade that replaces the factory plenum and utilizes all pre-existing factory hardware including the oe factory throttle body. The improved ipd intake design allows for smoother, less turbulent and more efficient air flow with higher velocity air intake speed creating impressive power and torque gains.
The superior design of the dfi ipd plenum provides an additional 12-14 horsepower at the wheels. Unlike previous naturally aspirated ipd plenums that delivered stronger gains in the mid range, the new ipd dfi plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range t...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,095.95
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|