PORSCHE 987 SOUND MAT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This is made from the latest waterproof and sound deadening materials and provides twice the sound deadening and heat insulating qualities of the original no longer available part. Easily installed part will pass the strictest concours inspection! Great addition to the 1970-72 models that did not have an insulator pad installed at the factory. This item is special order and will take additional time to ship.
View/Change Diagram
Engine mats are infamous for sagging, cracking and deteriorating with age. The mat is located just above the engine in the engine compartment. Sold individually. 1 necessary per car. If you are installing a new engine dampening mat, it is best to update the retaining caps as well, part # 99904901140, 10 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $73.35
Make a selection
Sound dampening mats are infamous for drying out, breaking apart or drooping. Replace yours to clean up the look of your motor and keep engine noise to a minimum. We recommend replacing the plastic retaining caps, part # 99904901140 when installing. A quantity of 10 are needed. Sold individually. 1 needed per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $73.62
Make a selection
From $187.25
Make a selection
Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In additi...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89 930 1975-77
$6,460.30
Make a selection
Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addi...(choose a part on the right to read more)
General Fitment 911 1978-83 930 1975-77 911 1974-77 911 1984-86 911 1987-89
$6,891.50
Make a selection
"brombacher" 987/s (TUV) stainless steel sport muffler
Facts:
- + 5 crank hp & + 5 crank torque
- 2" tubing (50 mm) straight through design for max. Power
- weighs 23 lbs. (10,4 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle while remaining within the db limits of the TUV.
- no dme programming necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in germa...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$2,762.10
Make a selection
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- ecu software / programming is necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow r...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$7,475.60
Make a selection
"brombacher" catalytic bypass pipe for 964 89-94
- + 15 crank hp & + 13 crank torque
- 2 3/4" tubing (70 mm) straight through design for max. Power
- weighs 3.3 lbs. (1,5 kg)
- t 316 stainless steel for improved durability over t 304
- made in Germany
- dme programming necessary.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resis...(choose a part on the right to read more)
General Fitment 911 1987-89
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every part that b&b makes, along with the use of only the finest t304 stainless steel materials, it is easy to see why b&b has been an industry leader for over 20 years. B&b designs every system for increa...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1987-89
From $1,251.14
Make a selection
"brombacher" 987-2/s (sound version) stainless steel sport muffler
Facts:
- + 11 crank hp & + 10 crank torque
- 2" tubing (50 mm) straight through design for max. Power
- weighs 23 lbs. (10,4 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively f...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$2,753.30
Make a selection
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every part that b&b makes, along with the use of only the finest t304 stainless steel materials, it is easy to see why b&b has been an industry leader for over 20 years. B&b designs every system for increa...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1987-89
From $1,409.65
Make a selection
"m&m edition" sport headers with 200 hjs "hf" sport cats
Our m&m edition headers and cats were created for those who have already purchased the FVD / m&m sport mufflers (either TUV or sound version). They are a logical progression for those looking for added mid range torque and top end horsepower. Combined with the FVD / m&m muffler they offer just as much power as the FVD / m&m complete exhaust system.
Facts:
- + 20 crank hp & + 19 crank torque
- 2" tubing (50 mm) straight through design for max. Power
- 200 cell hjs tri metal high flow cats ("hf" cats)**
- weighs 12.6 lbs. (5.7 kg)
- 26 lb weight savings over complete OEM exhaust system!
- t 316 stainless steel for improved durability over...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
$4,365.90
Make a selection
"brombacher" 987/s (sound version) stainless steel exhaust system
Facts:
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts a...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$7,617.50
Make a selection
They started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded impressive horsepower and torque gains throughout the entire power band. Muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every part that b&b makes, along with the use of only the finest t304 stainless steel materials, it is easy to see why b&b has been an industry leader for over 20 years. B&b designs every system for increa...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1987-89
From $1,338.26
Make a selection
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- ecu software / programming is necessary.
Please note: for cars that do not have a valved system you must add our part number bes kls 000 001. In addition you must add FVD 331 987 00 for cars with headlamp leveling, typically found on u.s. Cars.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are eng...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,657.00
Make a selection
Brombacher 987/s (sound version) stainless steel exhaust system
Facts:
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08 BOXSTER 2005-08
From $5,181.00
Make a selection
Product details:
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-includes German-imported 200-cell hjs sport catalytic converters for maximum performance
-constructed from equal-length t304 stainless steel c.n.c. Mandrel-bent tubing for improved torque and equalized engine pulsing
-more power and torque across the rpm band and dramatically improved sports car sound
-composite gaskets are included for a leak proof seal
-direct replacement for the OEM headers with no cutting or welding ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $2,895.00
Make a selection
Product details:
Dramatically improve sports car sound and throttle response with upgraded maxflo mufflers and inlet tubing; includes deluxe outlet tip
Features:
-fits all Porsche 944 turbo 951 vehicles (1985-1991)
-increases horsepower and torque by 26 whp and 29 ft-lbs
-saves 20 lbs from factory muffler system
-constructed from high quality 14-16 gauge cnc mandrel-bent t304 stainless steel for maximum performance and durability
-noticeable improvement in sports car sound and throttle response
-direct replacement for the OEM muffler with no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime lim...(choose a part on the right to read more)
General Fitment 944 1985-88 944 1989-91
$1,490.35
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection
Product details:
Free-flowing headers without catalytic converters; designed for maximum power and exhaust flow for race and track applications.
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-constructed from equal-length t304 stainless steel c.n.c. Mandrel-bent tubing for improved torque and equalized engine pulsing
-more power and torque across the rpm band and dramatically improved sports car sound
-composite gaskets are included for a leak proof seal
-direct replacement for the OEM headers with no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note: the 98...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $1,995.00
Make a selection
Product details:
Dramatically improve sports car sound and throttle response with upgraded maxflo mufflers and inlet tubing. includes deluxe bolt-on tips in polished or black finish, or Carrera GT style tips
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-available with polished or black chrome deluxe dual-style tips or Carrera GT style tips
-improves horsepower and torque by 5 whp and 4 ft-lbs
-complies with emissions regulations
-does not trigger check engine light
-constructed from high quality 14-16 gauge cnc mandrel-bent t304 stainless steel for maximum performance and durability
-noticeable improv...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $2,350.00
Make a selection
Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving.
Rennline’s track mats are constructed from lightweight anodized aluminum, weigh less than two pounds, and are stamped with reinforcing ribs for strength. They fit precisely over the contours of Porsche floors and affix with velcro or can be permanently mounted if desired.
For automobiles wit...(choose a part on the right to read more)
General Fitment 924 1976-79 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 968 1992-95
Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving.
Rennline’s track mats are constructed from lightweight anodized aluminum, weigh less than two pounds, and are stamped with reinforcing ribs for strength. They fit precisely over the contours of Porsche floors and affix with velcro or can be permanently mounted if desired.
For automobiles wit...(choose a part on the right to read more)
General Fitment 924 1976-79 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 968 1992-95
Os giken super lock limited slip diferential for g50 transaxle equipped cars. 87-98 911.
Os giken utilized its accumulated racing knowledge and engineering experience to develop its own limited slip differential. Four years of extensive research and development lead to a new and revolutionary lsd design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the os super lock lsd was born. The increased number of plates directly has not only dramatically improved our lsd design's locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durabili...(choose a part on the right to read more)
General Fitment 911 1987-89 911 1989-94 911 1994-98
$1,820.95
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|