Vehicles
22 not categorized PORSCHE 987 SUSPENSION PLATECan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.115900911030
$4,541.90
Make a selection FVD343997PSS
$893.46
Make a selection 11590296400
$7,236.90
Make a selection FVD34310007L FVD-alu-camberplates replace soft top strut rubber bushings. The FVD-camberplates are machined from billeted aluminum, providing you with a wide range of camber possibilities. You can get up to 4 degrees negative camber. FVD-alu-camberplates fits on original-shocks and cup-shocks. General Fitment911 TURBO/GT2 2001-05911 1998-05
$494.71
Make a selection 11590091103
$5,058.90
Make a selection 11590299300 Generelle merkmale: dfv-technologie (doppelstromungsventil) hohenverstellbar vollstandig zerlegbar fur wartung und reparatur salzspruhtest nach iso 9227 2 jahre limitierte garantie vorne: mcpherson federbein, upside down regulierung der zug- und druckstufendampfung uber einen einsteller federvorspannungsverstellung federrate 60 n/mm staubschutzmanschetten aluminiumdomlager mit einstellbarem sturz hinten: konventioneller stossdampfer regulierung der zug- und druckstufendampfung uber einen einsteller federvorspannungsverstellung federrate 100 n/mm staubschutzmanschetten aluminiumdomlager (nicht einstellbar)
$7,686.80
Make a selection 90134101890 Rennline high density front strut mounts for your 911/914 not only replace tired factory rubber pieces, but return better handling and ride quality without being overly stiff. At 25% more stiff than stock, these are a great compromise, allowing the front suspension to maintain better alignment and geometry over bumps and around corners thanks to their increased stiffness. Still at home on a race track, these will ride with a feel closer to factory than that of our more track oriented full camber plate and monoball setups. General Fitment914 1970-76911 1965-69 912 1965-69 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73
$247.50
Make a selection 372642739 Weltmeister® front camber plate set, 996/997 Boxster® & Cayman® General Fitment911 1998-05911 2005-08 BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08
$450.00
Make a selection MB1112 The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the almost 40 years the 911 has been on the road. For one, the rubber suspension bushings that monoballs replace are most likely already worn out or cracked from decades of use. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$425.95
Make a selection MB1230 The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the almost 40 years the 911 has been on the road. For one, the rubber suspension bushings that monoballs replace are most likely already worn out or cracked from decades of use. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$273.90
Make a selection 935FSUSP This light weight, bolt in kit replaces the factory front suspension arms, cross-member, and rubber bushings when converting to a coil over front suspension system. General Fitment911 1965-69911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76
$1,850.00
Make a selection FVD343986PSS9 Only for vehicles equipped with bilstein suspension pss9/10. General FitmentCAYMAN 2009-12CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
$2,046.79
Make a selection S1116RDL For a perfect fit, reliability you can depend on, full adjustability, and optimum performance, the factory GT3 swaybar is the best on the market. We have packaged them together with new bushings and our adjustable drop links to provide you with a wining combination. The light weight hollow 26.8mm od sway bars are half the weight of a solid bar with the same stiffness. Complete with fully adjustable front drop links to eliminate suspension preload. Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. All necessary hardware is provided in zinc ...(choose a part on the right to read more) General FitmentBOXSTER 2005-08CAYMAN 2006-08
$450.95
Make a selection RS18 Set of two sealed monoball cartridges - front or rear. Most Porsche owners today, especially those of us who take our cars to the track, have equipped our cars with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, rubber suspension bushings are compressed and flexed by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential. Monoballs are a downside-free improvement; because they eliminate four important sources of suspension slop without making your car's ride harsher. Your Porsche will handle and brake with greater precision...(choose a part on the right to read more) General FitmentBOXSTER 1997-04BOXSTER 2005-08 CAYMAN 2006-08 911 GT3 2007-11 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$250.00
Make a selection RMB11 The Porsche 911 came equipped from the factory for high performance cornering -- but some things have changed in the almost 40 years the 911 has been on the road. For one, the rubber suspension bushings that monoballs replace are most likely already worn out or cracked from decades of use. General Fitment911 1987-89911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69 912 1965-69
$273.90
Make a selection S1117 For a perfect fit, reliability you can depend on, full adjustability, and optimum performance, the factory GT3 swaybar is the best on the market. We have packaged them together with new bushings and our adjustable drop links to provide you with a wining combination. The light weight hollow 26.8mm od sway bars are half the weight of a solid bar with the same stiffness. Complete with fully adjustable front drop links to eliminate suspension preload. Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. All necessary hardware is provided in zinc ...(choose a part on the right to read more) General FitmentBOXSTER 2005-08911 2005-08 911 GT3 2007-11 CAYMAN 2006-08
$625.95
Make a selection P910160 Adjustable spring plates are the ultimate way to lower or raise your vehicle all at the turn of a bolt. They allow you to weight balance the rear of the car so it performs the same in left-hand and right-hand corners. You avoid all the frustration and wasted time trying to guess at correct torsion bar spline placement, or having to redo one side to correct car height. Complete with plastic bushings to maintain precise suspension height. Sold in pairs. Note: the hard plastic bushings necessary for precision suspension movement may resonate noise on the street. General Fitment911 1987-89
$494.99
Make a selection RS21 Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire’s contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennline’s sealed camber plates incorporate fk motorsports spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts. Comes as a set of two. Why are rennline’s strut mounts the best ? General FitmentBOXSTER 2005-08CAYMAN 2006-08 911 2005-08 911 GT3 2007-11
$603.90
Make a selection 477399169C Known as: suspension plate View/Change Diagram
$22.00
Make a selection 13271016 For all the Porsche drivers looking to replace their old standard suspension in their used "987", or for anyone who would like to increase their driving dynamics, st suspension now have the st x coilovers available. In addition to the tested and continuous lowering of up to 60 mm (1.2"-2.4"), the st suspension developed by kw allows you to further increase the handling and excellent road holding of the mid-engine Porsche Boxster and Porsche Cayman.once installed, the st x coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lower...(choose a part on the right to read more) General FitmentBOXSTER 2005-08
$1,376.66
Make a selection 115900964BIVAU Looking to lower the ride height on your pss10 suspension further without sacrificing ride quality? Our kit is just the trick, it allows you to lower a full 1.18-1.5 inches (30-40mm) beyond the lowest pss10 setting, simply by replacing the spring plates. Our kit does not change the damping and spring characteristics even though the car has been lowered further. Specific lowering: FVD part # 115900964bi up to 1.5 inches (40 mm) lower. FVD part # 115900964bi01 up to 1.18 inches (30 mm) lower. FVD part # FVD721115004 up to 1.5 inches (40mm) lower. Sold as a kit for the 2 front axle shocks. General Fitment911 1994-98911 1989-94
From $383.90
Make a selection 115110015 Lower your ride height up to 1.5 inches (40mm) by simply replacing the spring plate. This spring plate set the spring 1.5 inch lower. Factory shock and spring can be used. This leaves the damping and spring characteristics original even the car is lowered. Please note: only for shocks with a diameter of 61.85 mm at the threads. This will not fit mo30 suspension (i.e. Shock part #'s 965 343 041 05 / 965 343 042 05). This cannot be used on bistein b6 and hd shocks. Sold individually! 2 required for the front axle. General Fitment911 1994-98911 1989-94
From $75.90
Make a selection 150910160 Our rear spring plate set is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. The adjustability allows for precise re-indexing of the torsion bar 1 ½ inches up or down. New rs spec. (85 shore) rubber bushings are installed to make this a direct bolt on without the hassle of adding new bushings. 85 shore rubber is more durable than OEM 65 shore and provides more positive suspension location, yet is still quiet and compliant for street use. Each plate is clearly marked for indexing purposes and includes complete installation instructions. Features: made from ¼ inch spring steel adjustment range of 1 ½ inches up or down includes new rs sp...(choose a part on the right to read more) General Fitment911 1970-73
From $449.99
Make a selection 115900964BIVAU1 Looking to lower the ride height on your pss9 suspension further without sacrificing ride quality? Our kit is just the trick, it allows you to lower a full 1.5 inches (40mm) beyond the lowest pss9 setting, simply by replacing the spring plates. Our kit does not change the damping and spring characteristics even though the car has been lowered further. Sold as a kit for the 2 front axle shocks. General Fitment911 1994-98911 1989-94
From $383.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |