PORSCHE 993 HOURS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Great reprint of the original. Won't last long before Porsche pulls the plug on this fantastic reprint. 19.75x27.5 inches.
General Fitment ACCESSORY
20 x 27 inches
General Fitment ACCESSORY
General Fitment 928 1978-82
From $219.00
Make a selection
This is an affordable alternative to spending a grand on a new dash for your car. Coverlay covers completely hide cracks, tears, and fading. Installs in 1/2 hour over your existing dash with provided glue for a factory finish look. Not for airbag equipped cars. available in black, dark brown, light blue, medium gray, maroon, dark green, dark gray, red, light brown, neutral brown, medium brown, light gray, and dark blue. Please indicate color choice when ordering.
General Fitment 944 1985-88 944 1989-91 968 1992-95
Product details:
Replaces the factory mufflers for improved flow; louder sports car sound with significant power increase
Features:
-fits all Porsche 993 turbo vehicles (1995-1998)
-increases horsepower by 20 whp
-load and sporty at low rpm, but more subtle as turbos spool higher
-includes fabspeed deluxe tips; polished angle-cut ovals
-simple diy installation in less then one hour
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1994-98
From $595.00
Make a selection
Product details:
Replaces the factory secondary muffler for improved flow and increased sound
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-increase in power and throttle response throughout the rpm range.
-saves 19 lbs from the rear of the vehicle
-more aggressive tone compared to the maxflo muffler system
-non-muffled aggressive exhaust note
-constructed from 14-16 gauge, t304l c.n.c. Mandrel bent stainless steel
-direct replacement for the OEM secondary muffler
-simple diy installation in less than 1 hour
-all fabspeed performance products are backed by the fabspeed life...(choose a part on the right to read more)
General Fitment 911 1989-94
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- software performs flawlessly on your 95' and 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight fly...(choose a part on the right to read more)
General Fitment 911 1994-98
$3,294.50
Make a selection
Product details:
Huge reduction in turbo lag for maximum possible power and sports car sound; based off of the Porsche factory 934 imsa race car design
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-increases horsepower and torque by 46 whp and 65 ft-lbs
-constructed with 3.0" tubing for maximum flow
-integrated angle-cut outlet
-simple diy installation in less than 1 hour
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1978-83 911 1984-86 911 1987-89 911 1989-94
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
For 1996 model year Porsches please see our part number FVD 993 618 71. You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us. The reason is 1996 model year ecu eprom's could only be flash loaded with software one time. To program these units requires the use of a coding socket. A late model ecu (1...(choose a part on the right to read more)
General Fitment 911 1994-98
$1,094.50
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- software performs flawlessly on your 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us to ensure what control unit you have. The reason is 1996 model year ecu eprom's could only be fl...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 9...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
This all-color guide leads 911 owners through 101 carefully selected projects. Illustrated with step-by-step color pictures, these half-hour to 8-hour projects are perfect for the weekend mechanic. Projects are divided into performance, handling, and customization categories, and accompanied by a handy chart that indicates how much time, talent, and cash needed. 240 pages.
General Fitment ACCESSORY
Great way to tighten up that loose up and down steering wheel action on your 914 924 944 or 944. easily installed after removing the steering wheel, saves hours over replacing the bearing original equipment on all 70-74 914s
View/Change Diagram
Red and white Porsche tequipment kit of two tail lights. Kit includes left and right-hand assemblies. Can be installed easily in under an hour with basic hand tools.
General Fitment BOXSTER 1997-04
Centric parts high carbon alloy brake rotors feature a double disc ground finish which virtually eliminates run out and any disc thickness variation issues. Double disc grinding also produces a non-directional finish for improved rotor and pad break-in. The surface roughness production standard for centric high carbon brake rotors: rms=64.3 or ra=1.6 micro-meters (63 micro-inches).
Centric parts high carbon alloy brake rotors feature our exclusive black e-coating on all non-friction surfaces. E-coating is an advanced electro-statically applied finish that has been engineered to withstand 400 hours of salt spray testing without corroding.
Centric parts high carbon alloy brake rotors utilize the same ...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06 CAYENNE 2007-10
Centric parts high carbon alloy brake rotors feature a double disc ground finish which virtually eliminates run out and any disc thickness variation issues. Double disc grinding also produces a non-directional finish for improved rotor and pad break-in. The surface roughness production standard for centric high carbon brake rotors: rms=64.3 or ra=1.6 micro-meters (63 micro-inches).
Centric parts high carbon alloy brake rotors feature our exclusive black e-coating on all non-friction surfaces. E-coating is an advanced electro-statically applied finish that has been engineered to withstand 400 hours of salt spray testing without corroding.
Centric parts high carbon alloy brake rotors utilize the same ...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06 CAYENNE 2007-10
Centric parts high carbon alloy brake rotors feature a double disc ground finish which virtually eliminates run out and any disc thickness variation issues. Double disc grinding also produces a non-directional finish for improved rotor and pad break-in. The surface roughness production standard for centric high carbon brake rotors: rms=64.3 or ra=1.6 micro-meters (63 micro-inches).
Centric parts high carbon alloy brake rotors feature our exclusive black e-coating on all non-friction surfaces. E-coating is an advanced electro-statically applied finish that has been engineered to withstand 400 hours of salt spray testing without corroding.
Centric parts high carbon alloy brake rotors utilize the same ...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06 CAYENNE 2007-10 CAYENNE 2011-14
Centric parts high carbon alloy brake rotors feature a double disc ground finish which virtually eliminates run out and any disc thickness variation issues. Double disc grinding also produces a non-directional finish for improved rotor and pad break-in. The surface roughness production standard for centric high carbon brake rotors: rms=64.3 or ra=1.6 micro-meters (63 micro-inches).
Centric parts high carbon alloy brake rotors feature our exclusive black e-coating on all non-friction surfaces. E-coating is an advanced electro-statically applied finish that has been engineered to withstand 400 hours of salt spray testing without corroding.
Centric parts high carbon alloy brake rotors utilize the same ...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06 CAYENNE 2007-10 CAYENNE 2011-14
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|