PORSCHE 993 TURBO HAT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Highlights:
Made for up to 900°c (1,650°f), for race cars but street legal!
High friction formula improves brake effect 30-40%.
Zero brake fade makes this material perfect for fast driving.
Capable of repeated heavy brake use without brake ?fall-off?.
Very minimal disc/rotor damage characteristics.
Suitable for shorter track events and race use.
Features red ?brake in? Surface coating for instant safe braking after install.
Medium hardness material feels good at pedal.
Work perfectly from cold at least as good or better than stock pads.
Ece r 90 type approved for most cars.
High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. ...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $286.73
Make a selection
Highlights:
Superb daily driver, OEM replacement, r90 type approved pad.
Features red ?brake in? Surface coating for instant safe braking after install.
New 100 % eco friendly material with zero sulphides.
No shims for noise reduction needed.
More bite from cold.
Works in hot and dry climates as well as in cold.
Fully r 90 approved.
If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad?
The blackstuff brake pad is a total non metallic pad containing zero stee...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1994-98 911 1989-94 928 1992-95
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
Highlights: made for up to 900*c (1,650*f), for race cars high friction formula improves brake effect 30-40%. Zero brake fade makes this material perfect for fast driving. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Suitable for shorter track events and race use. Features red "brake in' surface coating for instant safe braking after install. Medium hardness material feels good at pedal. Work perfectly from cold at least as good or better than stock pads. Ece r 90 type approved for most cars. High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. Not only a high friction pad ...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1994-98 911 1989-94 928 1992-95
From $299.20
Make a selection
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
2 x Ø90mm end tips oval
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$10,794.30
Make a selection
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$9,235.60
Make a selection
Brey-krause harness guide bars properly locate a racing shoulder harness relative to the driver. Harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking. Brey-krause harness guide bars are carefully engineered to transfer these forces to factory supplied points that are designed to take the load.
Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
You can bolt them in for a weekend auto cross or track event and quickly remove them for work on monday.
Fits: cup-race (90-93), turbo-look (91-94), rsr (92-92), rs (92-92), c4 (89-94), c2 (90-94), turbo 3.3 (78-89), tur...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1970-73
Keep your brake temps under control with our brake air duct kit. Available with or without fog lights. This kit comes with fog lights.
Note: not for use on a u.s. Bumper unless you are prepared to fill the gap that removing the bumperettes creates. You will see a 1/2 inch gap on the top of the air inlet and a 1/4 on the bottom.
When installing this kit on a euro bumper use part number FVD 631 407 to complete the look.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98)
General Fitment 911 1994-98
$1,333.22
Make a selection
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
Instrument faces are one of the most visible and frequently looked at components in your Porsche. When making the decision to change them you want to make ensure that you select a high quality product similar to your originals. Each of our sets are made in Germany and use the factory scripting (font). Our faces also offer the same uniform night time shading and includes the original die cut notches for easy installation. Each kit is made for global distribution, so simply pick out the faces that match your originals. They are available in a variety of colors to make a bold statement, or to match exterior paint schemes. This kit includes faces for: manual transmission / tiptronic transmission / kph / mph / celsi...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94
From $418.70
Make a selection
This turbo recirculation valve is the result of of 25 years of experience and engineering expertise. With the reputation for innovating and manufacturing the best automotive valves in the world, you can be certain that there is currently no better replacement valve available. The fmdv008pa version seen here has the benefit of a 90 degree vacuum port, that can be rotated to three different orientations. This is often the preference where either space is restricted, or the original fitment valve has a 90 degree connection, either on the valve or connecting hose.
Forge's recirculation valve features a greater flow rate than the OEM Bosch valve, as well as a faster response time, due to our revised design. By usi...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 944 1985-88 944 1989-91
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Vehicles which were delivered without the Porsche® sport exhaust (pse) will need this kit for installation. It includes all of the vacuum lines and electronics needed to upgrade your exhaust to a valved system.
What?s in the box:
- electronic control module.
- wiring harness.
- vacuum valve and vacuum lines.
- vacuum box with support.
- open / closed button.
- mounting hardware.
Fits: GT2 rs, 3.6l, 456kw (11-), GT2 (08-09), turbo (07-09), speedster, 3.8l, 300kw (10-), Carrera GTS4, 300kw (12-), Carrera GTS2, Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (0...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08
From $842.70
Make a selection
Product details:
Bolt-on turbo-back exhaust system providing great sports car sound and improved exhaust flow
Features:
-fits all Porsche 964 turbo 965 vehicles (1990-1994)
-increased horsepower and torque throughout the rpm range
-dramatic increase in sports car sound with a deeper, throatier tone.
-includes fabspeed’s deluxe outlet tips; polished angle-cut ovals
-maxflo mufflers are radius stress relieved, hydro-formed cases that are pulse tig welded with 2000 degree ceramic fiber and stainless steel wool packing
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-d...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,395.00
Make a selection
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
Brey-krause harness guide bars properly locate a racing shoulder harness relative to the driver. Harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking. Brey-krause harness guide bars are carefully engineered to transfer these forces to factory supplied points that are designed to take the load.
Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
You can bolt them in for a weekend auto cross or track event and quickly remove them for work on monday.
Fits: 968cs (93-95), 968 (92-95), turbos (88-91), turbo (86-88), 944cup (86-89), 944s2 (89-91), 944s (87-88), 944 (...(choose a part on the right to read more)
General Fitment 968 1992-95 944 1982-85 944 1985-88 924 1980-85
Complete race exhaust system for all 964 models.
Facts:
- + 25 crank hp (18 kw) & + 19 crank torque (with software & intake mods).
- 100 cell high flow German catalysts.
- headers have a 42 mm collector outlet.
- weighs 50.7 lbs (23 kg) including hardware.
- made in Germany
Please add our race exhaust installation kit to your order which is our part # FVD 111 964 15 gkt . It includes everything that you need to install this system.
Fits: cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1989-94
$2,842.44
Make a selection
Improves aerodynamic efficiency and reduces the wind noise that the a-pillar gutters make at higher speeds. Comes with everything needed to make installation simple.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94), turbo 3.3 (78-89), turbo 3.0 (75-77), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 2.7 (74-76), 911 2.7 (74-77), rs (73-73), 911s (70-73), 911tk (73-73), 911tv (72-73), 911te (72-73), 911e (70-73), 911t (70-71), 911l (68-68), 911s (67-69), 911e (69-69), 911t (68-69), 911 (65-68)
General Fitment 911 1994-98 911 1989-94 911 1970-73
From $276.10
Make a selection
Rear bumper center section race look for Porsche 964/965 turbo
- replaces the factory center section.
- gives your car a Porsche race look.
- made to be used with the factory rs license plate light.
- just like the factory piece this piece is made out of abs plastic ? No fiberglass!
- injection molded.
- a perfect finish makes painting this center section easy and inexpensive.
This center section fits your Porsche 911/964/965 turbo (all my) and gives you the option of replacing the factory center section with the famous race look piece.
The center section comes with the shadow gap in the bottom area of the center section so that it fits the rear lining. You can use the factory rs license plate li...(choose a part on the right to read more)
General Fitment 911 1989-94
From $399.00
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 9...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Helical lsd differential is suitable for Porsche with g50 gearboxes, to replace the standard open differential. A direct replacement for the standard Porsche differential.
Automatic torque biasing differential enables your car to accelerate quicker and corner faster.
The differential powers both drive wheels under nearly all conditions. With an ordinary open differential (standard on most cars), precious power is wasted during wheel spin under acceleration. This happens because the open differential shifts power to the wheel with less grip, along the path of least resistance. The differential, however, does just the opposite. It senses which wheel has better grip, and biases the power to that wheel. It do...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1970-73
From $2,094.55
Make a selection
This is a kevlar racing dashboard that saves 8.8 lbs. (4 kg.) over the factory dashboard. Small modifications will need to be made to install it perfectly. Sold individually. 1 necessary per car. Please note: please supply your FVD part specialist with the year and model of your car. These are made to order.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98 911 1989-94
From $1,198.94
Make a selection
Removing the blower motor assembly from your 1989-98 964/993 is a very standard modification for cars that want to loose a few pounds. This modification reduces your cars weight by about 10 pounds and really cleans up the engine bay. This kit is an exact replica as used by Porsche motorsports for the factory lightweight 964 cup and 964 rsr race cars. Manufactured from aluminum and is available in red and black powder coat or clear anodized. Comes with all the stainless steel hardware required for a 20 minute installation. Will not work on turbo cars. Black in color.
Note: fits 964/993 89-95 non variocam cars.
General Fitment 911 1989-94 911 1994-98
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|