PORSCHE 996 END CAP SEAL
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!
General Fitment 911 1965-69 911 1970-73
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity)...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Great news! the original j pipe cap that the factory used to cap off the passenger j pipe when they in 1973 installed the updated blower motor is finally available via your friends at Automobile Atlanta. Never offered as a separate part by the factory, this cap installs over the pipe and clamps off with a stainless clamp allowing for single blower outlet fans to function properly via the short heater blower hose while providing a tight seal to the heater system. Necessary concours entry equipment, no properly restored 73-74 014 can be without it.
General Fitment 914 1970-76
This is the round rubber cap that seals the door contact switch. They degrade and become brittle with age and are important as they keep moisture out of the switch. We recommend replacing both at the same time. Sold individually. Left of right side fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,792.70
Make a selection
High-quality OEM behr replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We strongly recommend ordering the screw cap, part # 91110715500 and seal, part # 90012313630 when installing this part. The above parts are typically damaged when removing the insert. Sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $62.00
Make a selection
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Our rubber kits are for the perfect restoration. Available only from Automobile Atlanta, this kit consists of everything we use in our restoration shop.
Kit consists of:
2 - b91463140506 - side marker seal gasket 914 - two required - normally $18.02
2 - b91463195710 - 914 front turn signal seal - two required - normally $28.62
1 - b91451190110 - front trunk hood seal 914 - normally $76.00
1 - b91451190210 - front bulkhead seal; 914 1970-76 - normally $20.09
2 - r91462820311 - swf washer nozzle (oem) - normally $19.60
2 - r90162892600 - genuine Porsche wiper arm cap 911 914 912-89 - normally $12.40
2 - b91455915510 - 914 fender to cowl seal - normally $8.50
1 - b91455226310 - ...(choose a part on the right to read more)
General Fitment 914 1970-76
$1,011.78
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
Application: all Porsche 928's made by 928 motorsports.
This american-made all-aluminum radiator is custom-built just for the Porsche 928. It functions wonderfully as either a replacement for the stock radiator, or as a cooling-system upgrade for those that need extra cooling capacity.
We don't sell a "one size fits all" radiator for the 928. There are different radiators for cars with different transmissions, fan shrouds, and with or without integral engine oil coolers. We make nine different models for the 928, meaning you will get exactly what you need and only what you need from us for your car. A true custom fit.
Even though our radiator is a little thicker in the core (for better cooling capacity),...(choose a part on the right to read more)
General Fitment 928 1978-82 928 1983-86 928 1987-91 928 1992-95
FVD?s ims bearing vs. The competition:
There is a lot of information online about ims bearing failures, why they occur, how to detect them, how to install an aftermarket bearing, etc. So there is no need for us to go into depth on the subject. Our stance is to sell a top of the line bearing produced to higher specifications than what was originally in the car and is currently available on the market.
FVD ims bearings are manufactured by skf in Germany and are highest rated skf ?super-precision? Class of bearings which are characterized by:
High-speed capability
High load carrying capacity
High stiffness
Low friction
Our single row ceramic bearings consist of the highest grade ball material which...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
FVD "brombacher" level 3 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software, bmc sport air filter and our "brombacher" stainless steel exhaust system for the 997s-2 dfi.
"brombacher" exhaust system facts (based on 997s):
- + 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
- 12lbs (5 kg) weight savings
Stock:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:...(choose a part on the right to read more)
General Fitment 911 2009-12
$10,371.90
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
FVD "brombacher" level 3 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software, bmc sport air filter and our "brombacher" stainless steel TUV exhaust system for the 997s-2 dfi.
"brombacher" exhaust system facts (based on 997s):
- + 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
- 12lbs (5 kg) weight savings
Stock:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 1...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,711.90
Make a selection
This cost effective alternative, to buying threaded body struts, allows you to simply convert your current bilstein struts to coil-overs for a fraction of the price. allows ride height to be adjusted with ease.
2.25" id coil springs allow for spring rates greater than what is available in torsion bar
Sizes.
Upper spring hat features a proprietary design sealed thrust bearing, which proves to be the cleanest solution in steering/spring rotation.
Square threaded design is stronger and more resistant to dings, dirt, and binding associated with the traditional bilstein rsr struts. square threads actually lock the spring perch in place under load, this is backed up by a nylon tipped set screw for extr...(choose a part on the right to read more)
General Fitment 914 1970-76
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
- allows tie rods to be adjusted downward in extra precise 1/32” (1mm) increments, taking advantage of a wider adjustment range than other kits on the market.
- utilizes one of the highest quality alloy steel spherical rod ends available. teflon/kevlar lined, full length body, and capable of 30 degrees misalignment, so there is no binding throughout suspension travel or when the car is raised off the ground.
- 14mm “tapered fit” 12.9 grade central shaft wedges itself into the steering arm just like the factory Porsche tie rod ends, providing superior strength where it is needed. no drilling of the steering arm is required. beware of the "other" kits using inadequate 7/16" bolts.
- machine...(choose a part on the right to read more)
General Fitment 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 914 1970-76
This gasket sits on the outside of the window slot to channel the window glass. It can degrade with time and is essential to keep moisture out of the cabin. We recommend replacing the right and left sides together. When inspecting your window guide gaskets, look to see if your window / door caps are missing and need to be replaced, part # 9997033454001c and 9997033444001c. They commonly get brittle and fall out with time. Sold individually. Driver side fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $12.10
Make a selection
This gasket sits on the outside of the window slot to channel the window glass. It can degrade with time and is essential to keep moisture out of the cabin. We recommend replacing the right and left sides together. When inspecting your window guide gaskets, look to see if your window / door caps are missing and need to be replaced, part # 9997033454001c and 9997033444001c. They commonly get brittle and fall out with time. Sold individually. Driver side fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $12.10
Make a selection
High-quality ate, OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $14.56
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|