PORSCHE 996 PORSCHE PUMP SEL
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Kit includes: software genius flash tool , sport air filter, exhaust system GT with 90mm endtips and 200 cell sportcatalytic, ipd with 82 mm throttlebody. Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 280kw (381hp) @ 7400rpm max. Torque - 385nm (284lbf ft) @ 5000rpm max. Speed - 312km/h max. Rpm - 8000rpm acceleration 0-100km/h - 4.6s tuning: max. Power - 308kw (420hp) @ 7500rpm max. Torque - 450nm (295lbf ft) @ 5000rpm max. Speed - 320km/h max. Rpm - 8200rpm acceleration 0-100km/h - 4.1s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led ...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
From $10,481.65
Make a selection
Kit includes:
Software fast load., sport air filter
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 375kw (510hp) @ 5000rpm
Max. Torque - 745nm (550lbf ft) @ 4500rpm
Max. Speed - 328km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.8s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfect...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,067.23
Make a selection
Kit includes:
Software fast load., sport air filter, sportmuffler (100 cell sport catalytic), k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,571.48
Make a selection
Kit includes:
Software fast load, sport air filter, sport muffler set " brombacher" , mounting kit muffler, ipd with 82 mm throttlebody.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 294kw (400hp) @ 7500rpm
Max. Torque - 415nm @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to ou...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$6,364.33
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 386kw (525hp) @ 6000rpm
Max. Torque - 755nm (557lbf ft) @ 4500rpm
Max. Speed - 329km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$7,576.25
Make a selection
Designed to slow down the power steering pump to prevent it from overheating in racing conditions, this pulley will quickly pay for itself by not just saving your pump, but also your weekend at the track. This pulley is fully balanced and is a 16% reduction. An added benefit is increased power and torque across the entire rpm range the kit comes complete with the crank pulley, tension adjusting tool, and a new crank pulley bolt. fits all 986, 987, 996 and 997 except the turbo, GT3 or dfi. a boss on the front of engine case will need to be cut down slightly to clear the smaller pulley size. Will work with the factory belt in new condition, but a 10mm shorter belt is ideal and recomended. for Boxster or Cayman...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 911 1998-05 911 GT3 2003-05 911 2005-08
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 288kw (392hp) @ 7500rpm
Max. Torque - 400nm (295lbf ft) @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$1,629.08
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler (100 cell sport catalytic), k24-race turbocharger l/r
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 397kw (540hp) @ 7000rpm
Max. Torque - 760nm (561lbf ft) @ 4500rpm
Max. Speed - 331km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally le...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$14,998.41
Make a selection
Hengst fuel filters remove particles of rust and dust, tank residues, water and other substances that can adversely affect the operation of modern fuel injection systems.
Always change this filter every 12000 miles. your fuel injection system depends upon it! it is located in the rear near the fuel pump, and is an easy replacement.
View/Change Diagram
From $32.00
Make a selection
Designed to slow down the power steering pump to prevent it from overheating in racing conditions, this pulley will quickly pay for itself by not just saving your pump, but also your weekend at the track.
The pulley is fully balanced and is a 16% reduction. its weight has been optimized to be 1/2 that of any other underdrive pulley on the market today.
An additional benefit is increased power and torque across the entire rpm range.
The kit comes complete with the crank pulley, tension adjusting tool, and a new crank pulley bolt. fits all 986, 987, 996 and 997 except the turbo, GT3 or dfi. a boss on the front of engine case will need to be cut down slightly to clear the smaller pulley size.
For ...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05 911 2005-08
If you are looking for a transmission oil cooler system that is simple to install, provides lasting results and is perfect for a driver, the weekender, or for track use look no further. This kit includes a sleek high-performance oil cooler that mounts simply to the transmission cover with the included bracket and hardware. The stainless braided lines seamlessly screw into the transmission housing drain / fill plug location, no modification required. The electric, self-priming, 12 v oil pump is made with helical bronze gears, a stainless-steel shaft and a nickel plated brass body for the reliability that you expect from your Porsche. The pump includes a bracket that allows for simple installation. Simply connect...(choose a part on the right to read more)
$1,529.00
Make a selection
Exciting news from 914 world headquarters! finally a way to replace the fuel injection pump without breaking the bank. kit includes the pump, filter and conversion hose that you can mount up front or in the original position, just by connecting the two return hoses together.
914 fuel pump update kit, a great solution to the expensive three port version
I used to say years ago that the three port fuel pump fitted to the 70-74 Porsche 914s never failed. well i have lived long enough to eat my words, they are all failing! factory discontinued, and very very expensive to rebuild (we sell them on our site for 395) we figured that we had to come up with a solution. relying on the Porsche factory for a lead...(choose a part on the right to read more)
General Fitment 914 1970-76
Turn buckle to tension the power steering pump belt. often the threads of the turn buckle break and then the belt slips rendering the power steering useless. this factory part easily installed solves the problem.
View/Change Diagram
From $35.00
Make a selection
The unichip is a computer and harness with factory connectors that electronically resides between your car's ecu and engine in an arrangement known as "piggybacking" because it does not replace the factory computer, enabling 100 percent of an engine's untapped power. Sold worldwide for more than a decade, the unichip is a tested and proven engine performance product used on the street, racetrack, and in off-road applications.
Unichip plug n play facts:
-no permanent host vehicle physical or electronic modifications with no footprint for warranty concerns.
-simple installation (15-45 minutes depending on application)
-5 fully integrated user selectable map sets, each with timing, fuel, and boost curv...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,056.19
Make a selection
The girodisc system is a direct replacement for the oe disc on all 996 GT2/gt3's. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency. The girodisc front rotors are approx 21.0 lbs vs. 25.6 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 1998-05
$1,620.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers and longer bolts. Girodisc rotor is slightly larger than the OEM rotor at 340mm versus 317mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 911 1998-05 911 2005-08
$1,485.00
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 325mm versus 298mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high streng...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,485.00
Make a selection
The girodisc system is a direct replacement for the oe disc on all 997.2 GT3/gt2's, with or without the OEM pccb rotors. No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13 911 GT3 2007-11
$2,160.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 350mm versus 340mm providing greater braking force and cooling capacity. The girodisc front rotors are approx 21.0 lbs vs. 24.4 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved van...(choose a part on the right to read more)
General Fitment 911 2009-12
$1,620.00
Make a selection
The girodisc system is a direct replacement for the oe disc on all 987 Caymans/Boxsters equipped with pccb rotors from the factory.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by girodisc in the usa to girodisc own specifications and cadmium plated fo...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,620.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 325mm versus 298mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high streng...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$1,485.00
Make a selection
The girodisc system is a direct replacement for the oe disc. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the dis...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,350.00
Make a selection
The girodisc system is a direct replacement for the oe disc on all 997.1 GT3/gt2's, both pccb and non-pccb equipped vehicles.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by girodisc in the usa to girodisc own specifications and cadmium plated for a l...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13 911 2009-12 911 1998-05 911 2005-08
$1,620.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers and longer bolts. Girodisc rotor is slightly larger than the OEM rotor at 350mm versus 330mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 2005-08
$1,620.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|