PORSCHE 996 TURBO CAR ENGINES
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Known as: hose piece
View/Change Diagram
From $13.05
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
Designed to prolong the life of your turbocharger, this greddy turbo timer allows your Porsche to idle the engine for a timed period, with the ignition key removed. This conveniently allows the engine oil and turbo center cartridge to cool down properly and prolong turbo and oil life. The run time can be programmed by the user or utilize it’s “full auto mode”, which estimate the driving rpm according to the vehicle’s alternator signal and then recommend a count down time. To prevent theft, the unit includes a parking brake and speedo hook-up which disengage operation if there is an attempt to move the vehicle without the key. The unit also includes a stopwatch/lap timer and attack modes along with a bui...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 944 1989-91 944 1985-88
Highlights:
Superb daily driver, OEM replacement, r90 type approved pad.
Features red ?brake in? Surface coating for instant safe braking after install.
New 100 % eco friendly material with zero sulphides.
No shims for noise reduction needed.
More bite from cold.
Works in hot and dry climates as well as in cold.
Fully r 90 approved.
If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad?
The blackstuff brake pad is a total non metallic pad containing zero stee...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
"brombacher" 996 tt (sound version) stainless steel exhaust system
Facts:
- + 30 crank hp & + 22 crank torque
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s sep...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,873.20
Make a selection
One of the most important upgrades for the Porsche 996, Cayenne turbo or panamera turbo is to replace the factory Bosch diverter valves. The factory valves are prone to leaking pressure under increased boost when the car has an upgraded ecu flash. As well, the factory Bosch valves will taper boost off with the diaphragm design even at stock boost levels. To help keep the boost pressure constant all the way to redline, upgrading the stock diverter valves to the agency power racing diverter valve kit will improve your cars overall performance.
These valves are cnc machined 6061 aluminum which have been precision engineered to fit with the stock or aftermarket f-hose and intake return hoses. The internal const...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 CAYENNE 2007-10 CAYENNE 2003-06
Highlights:
Superb daily driver, OEM replacement, r90 type approved pad.
Features red ?brake in? Surface coating for instant safe braking after install.
New 100 % eco friendly material with zero sulphides.
No shims for noise reduction needed.
More bite from cold.
Works in hot and dry climates as well as in cold.
Fully r 90 approved.
If you simply need a quality OEM replacement pad, look no further than the blackstuff brake pad. It is a highly engineered brake compound that lasts longer, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad?
The blackstuff brake pad is a total non metallic pad containing zero stee...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1994-98 911 1989-94 928 1992-95
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
Use only when already connecting rods with sps-carr-6 was delivered!
All other connecting rod needs to be sent to carrillo using this screw!
The s connecting rod bolt (sps-carr-6) needs to be replaced under race conditions only at every third overhauling the engine.
When replacing the screw lubricate the screw head and the thread. We recommend using a mixture of molybdenum-based paste with motor oil.
Torque 89 nm (65 foot pounds)
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rsr (92-92), rs (92-92), c4 (89-94), c2 (90-94), 916 (70-76), 914-6 (70-...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94 914 1970-76 911 1970-73
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,230.60
Make a selection
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- software performs flawlessly on your 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us to ensure what control unit you have. The reason is 1996 model year ecu eprom's could only be fl...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Kit includes:
Software fast load., sport air filter
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 375kw (510hp) @ 5000rpm
Max. Torque - 745nm (550lbf ft) @ 4500rpm
Max. Speed - 328km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.8s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfect...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,067.23
Make a selection
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 288kw (392hp) @ 7500rpm
Max. Torque - 400nm (295lbf ft) @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$1,629.08
Make a selection
Kit includes: software genius flash tool , sport air filter, exhaust system GT with 90mm endtips and 200 cell sportcatalytic, ipd with 82 mm throttlebody. Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 280kw (381hp) @ 7400rpm max. Torque - 385nm (284lbf ft) @ 5000rpm max. Speed - 312km/h max. Rpm - 8000rpm acceleration 0-100km/h - 4.6s tuning: max. Power - 308kw (420hp) @ 7500rpm max. Torque - 450nm (295lbf ft) @ 5000rpm max. Speed - 320km/h max. Rpm - 8200rpm acceleration 0-100km/h - 4.1s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led ...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
From $10,481.65
Make a selection
Kit includes:
Software fast load, sport air filter, sport muffler set " brombacher" , mounting kit muffler, ipd with 82 mm throttlebody.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 11,7:1
Max. Power - 280kw (381hp) @ 7400rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 312km/h
Max. Rpm - 8000rpm
Acceleration 0-100km/h - 4.6s
Tuning:
Max. Power - 294kw (400hp) @ 7500rpm
Max. Torque - 415nm @ 5000rpm
Max. Speed - 315km/h
Max. Rpm - 8200rpm
Acceleration 0-100km/h - 4.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to ou...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
$6,339.41
Make a selection
Kit includes:
Software fast load., sport air filter, sportmuffler (100 cell sport catalytic), k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,660.82
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- software performs flawlessly on your 95' and 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight fly...(choose a part on the right to read more)
General Fitment 911 1994-98
$3,294.50
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 9...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Removing the blower motor assembly from your 1989-98 964/993 is a very standard modification for cars that want to loose a few pounds. This modification reduces your cars weight by about 10 pounds and really cleans up the engine bay. This kit is an exact replica as used by Porsche motorsports for the factory lightweight 964 cup and 964 rsr race cars. Manufactured from aluminum and is available in red and black powder coat or clear anodized. Comes with all the stainless steel hardware required for a 20 minute installation. Will not work on turbo cars. Black in color.
Note: fits 964/993 89-95 non variocam cars.
General Fitment 911 1989-94 911 1994-98
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|