PORSCHE 996 TURBO PISTON AND RING KITS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
One of the most important upgrades for the Porsche 996, Cayenne turbo or panamera turbo is to replace the factory Bosch diverter valves. The factory valves are prone to leaking pressure under increased boost when the car has an upgraded ecu flash. As well, the factory Bosch valves will taper boost off with the diaphragm design even at stock boost levels. To help keep the boost pressure constant all the way to redline, upgrading the stock diverter valves to the agency power racing diverter valve kit will improve your cars overall performance.
These valves are cnc machined 6061 aluminum which have been precision engineered to fit with the stock or aftermarket f-hose and intake return hoses. The internal const...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 CAYENNE 2007-10 CAYENNE 2003-06
Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders have extremely high thermal resistance and are nikasil coated to reduce wear and friction. We also have the piston rings (sealing and oil scrapers) pre-installed to ensure reliability. Each of our piston and cylinder kits are complete and ready for installation. Features: mahle forged 935 3.0 l turbo pistons mahle nikasil coated cylinders increased 7:1 compression = greater acceleration 95 mm pistons / 95 mm finned wr group 0 cylinders piston rings pre-installed piston pins and circlips are included complete set of 6 - ready for installation made in Germany we recommend the complete engine gas...(choose a part on the right to read more)
General Fitment 911 1970-73
From $6,197.50
Make a selection
Stoptech big brake kit front drilled yellow caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Mahle 3.8 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets with 23 mm wrist pin. - slip fit, steel (st52) cylinders. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.4:1 compression. - 102 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. *please note: horsepower and torque gains depend on the software used, camshafts, crankshaft and other internal modifications. 700+ hp and torque can be achieved with use of these pistons and cylinders with a proper engine build and software. Contact your sales person for ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09
$14,654.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that opt...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Stoptech big brake kit front slotted red caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Since 2001, the Porsche 996 turbo has been one of the best cars built. For it;s time, there was nothing that had the overall package that this 911 did. With twin turbos, the 3.6l engine put out over 400 horsepower. Moving forward to the current day, tuning and building a Porsche 996tt is much easier. Many companies have produced economical ways to get customers the increased power anywhere from 500 - 1000+ horsepower. With the 996tt cars priced as low as $35,000, a new generation of drivers is able to enjoy what the 996 turbo can do. Going back to 2005, vivid racing enters the Porsche market. Having built a supercharged 996c2, a 750hp 996tt, and blistering 206.2mph in the mile on a 825hp 997tt, we can say our s...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,775.00
Make a selection
Mahle 4.1 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.1:1 compression. - 106 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. Water channels and case must be machined to fit. Please add the following to your order: 2 qty. Base gaskets, part # FVD10303905zfd 2 qty. Head gaskets, part # FVD10303905zkd 1 qty. O- ring base set, part # FVD10303905or 1 qty. O- ring head set, part # FVD10303905oro *please note: horsepower and torque gains depend on the softwa...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 TURBO/GT2 2001-05
From $8,474.70
Make a selection
The bbi autosport Porsche 996/997 turbo clutch slave cylinder conversion kit is a direct replacement part that eliminates the problematic factory power-assist system for improved reliability and pedal feedback. The factory power-assisted clutch system has always been the achilles heel for the Porsche 997 turbo. Utilizing the power steering system to help reduce the force needed to depress the clutch pedal, it is a flawed design that delivers a mushy pedal feel with poor feedback, and is highly prone to failure.
Unlike other kits, the bbi autosport kit is designed be used with OEM clutch master cylinder, hose, and spring pack. This eliminates the need for additional parts, making our kit a complete plug an...(choose a part on the right to read more)
$1,330.00
Make a selection
Moton club sport damper system Porsche 944 turbo 85-94
The club sport line is designed for the serious club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you.
The club sport damper is double adjustable w...(choose a part on the right to read more)
General Fitment 944 1985-88
$7,356.15
Make a selection
Moton club sport damper system Porsche 996 turbo 01-05
The club sport line is designed for the serious club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you.
The club sport damper is double adjustable w...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,166.15
Make a selection
Moton club sport damper system Porsche 997 turbo 07+
The club sport line is designed for the serious club racer and high performance street driver. This ultimate suspension system is by for the finest quality and best handling suspension system on the market today. Featuring remote reservoirs for superior fluid temperature control, quick release hydraulic lines (on most models) for easy installation, seperate compression and rebound damper valving adjustment and height adjustable spring perches, this kit is beyond the more common coil-over systems on the market. If your driving can benefit for the ultimate in suspension tuning, then this kit is for you.
The club sport damper is double adjustable wit...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,168.50
Make a selection
With the success of the vr825 power kit on our 997.1 turbo, it was time to package up some tested, proven, and powerful products for the 997.2 turbo. Proving that our parts work well on the Porsche turbo, our 997.1tt did a blistering 206.2mph in
1 mile! So starting from the basics, we began to build products 1 by 1 for the new pdk and 6speed 3.8l models. Our baseline dyno was done on a mustang awd dyno using 91octane pump fuel. We started with 422awhp. Each part we built the car was put back to stock and tested against it. Our final test came as an accumulation of the parts we had built making this the ultimate 997.2tt on stock turbos.
Our method of performance is simple. Good tuning, improve airflow,...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$7,830.00
Make a selection
Vivid racing's stage 1 horsepower kit for the 997tt is designed for those that want a little more power over the stock 480 horsepower without creating alot of attention. The stage 1 kit includes our vr tuned obdii ecu flash, a pair of boost recirculation valves, new 1 step colder spark plugs, and a bmc air filter. Vr tuned provides you with your original file and your tuned file. At any point, you can load your original file back to your car and there will be no footprint that the car has been flashed for warranty. The brv's replace the diaphram system for a spring and piston design. This helps boost come on stronger and hold more consistant to redline. These install in place of the factory units. To help the...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$2,970.00
Make a selection
Every piston and cylinder is complete and ready to be installed. They are packed as complete set for every engine. Carefully read our technical information before installing the parts. Piston rings and piston pins must not be modified. Modifications of any of these parts will void the manufacturers warranty.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$8,799.12
Make a selection
This kit will add 35+ hp and is made for aggressive street or track use. - forged pistons with double hump. - cylinder 107 mm and 114 mm high. - mirrored valve pockets. - deaxiated for trouble free installation. - compression 8.0: 1 made in Germany - made by mahle technical tip - the inside diameter of the heads must be adjusted to accommodate the larger pistons, and to accommodate for the additional thermal load the last 2 ribs should be welded together. We also recommend inserting a groove in the head and using the le mans style rings, part # FVD104999993
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or reque...(choose a part on the right to read more)
General Fitment 911 1994-98
From $6,461.47
Make a selection
Stoptech big brake kit rear slotted black caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$2,694.60
Make a selection
Stoptech big brake kit rear drilled black caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$2,694.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce tha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$3,126.60
Make a selection
Stoptech big brake kit front slotted silver caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce th...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$3,126.60
Make a selection
Stoptech big brake kit rear drilled red caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$2,694.60
Make a selection
Stoptech big brake kit front drilled black caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce tha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$3,126.60
Make a selection
Stoptech big brake kit rear slotted silver caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce tha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$2,694.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce tha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$3,882.60
Make a selection
Stoptech big brake kit front drilled red caliper Porsche 996 Carrera 4s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 2009-12
$3,126.60
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|