PORSCHE 997 SEARC
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Kit consists of:
1 - b91450704110 - left rear floor pan jacking triangle, 914 1970-76 - normally $69.50
1 - b91450704210 - right rear floor pan jacking triangle, 914 1970-76 - normally $74.50
1 - b91450101314 - rocker clamshell ,set of two; 2% off! - normally $431.20
General Fitment 914 1970-76
This is the seal that fits against the back of the rear window and buffers the engine lid keeping water out of the compartment. the original part has a steel spring embedded in it for attachment to the ledge and the repro glues on with some weatherstrip adhesive.
View/Change Diagram
This printed catalog contains 200 pages of Porsche 944 technical parts drawings. This printed catalog is a definitive reference for 944 owners. Not to worry, this is such a complete reference guide, you'll be glad you ordered.
General Fitment ACCESSORY
Our rubber kits are for the perfect restoration. Available only from Automobile Atlanta, this kit consists of everything we use in our restoration shop.
Kit consists of:
2 - b91463140506 - side marker seal gasket 914 - two required - normally $18.02
2 - b91463195710 - 914 front turn signal seal - two required - normally $28.62
1 - b91451190110 - front trunk hood seal 914 - normally $76.00
1 - b91451190210 - front bulkhead seal; 914 1970-76 - normally $20.09
2 - r91462820311 - swf washer nozzle (oem) - normally $19.60
2 - r90162892600 - genuine Porsche wiper arm cap 911 914 912-89 - normally $12.40
2 - b91455915510 - 914 fender to cowl seal - normally $9.00
1 - b91455226310 - ...(choose a part on the right to read more)
General Fitment 914 1970-76
$1,012.23
Make a selection
Engine ducting seal. Two pieces required. One piece for engine-to-body cover plate, and one another piece for two side cover plates. For 1500gs Carrera & Carrera 2, use two of these seals.
View/Change Diagram
From $40.61
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Motorsport quality for the ultimate durability and power on the street and track!
Stainless steel quality: wnr. 1.4301 (x5crni18-10), aisi 304 (v2a)
Developed and tested to survive the grueling environment of endurance racing.
Shorter length headers tend to crack on cylinders 3 and 4 under the higher heat and vibration at the track. Shorter pipe length does not have room to expand like a longer tube header which causes the cracking. Our double push-piece design on cylinders 3 and 4 allows the shorter length header to expand under these conditions and prevents cracking that has always been an issue on cylinders 3 and 4.
FVD Brombacherheaders are the only headers on the market which feature this inno...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,902.70
Make a selection
Posi quiet brake pads are manufactured using the same positive molding process utilized by original equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.
By offering a variety of friction compounds, the posi quiet brake pad program boasts the widest application coverage in the automotive aftermarket. The centric posi quiet brake program has a brake pad for every vehicle and driving style.
All posi quiet friction compounds have been specifically formulated to ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08
Posi quiet brake pads are manufactured using the same positive molding process utilized by original equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.
By offering a variety of friction compounds, the posi quiet brake pad program boasts the widest application coverage in the automotive aftermarket. The centric posi quiet brake program has a brake pad for every vehicle and driving style.
All posi quiet friction compounds have been specifically formulated to ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08
Motorsport quality for the ultimate durability and power on the street and track! Developed and tested to survive the grueling environment of endurance racing. Shorter length headers tend to crack on cylinders 3 and 4 under the higher heat and vibration at the track. Shorter pipe length does not have room to expand like a longer tube header which causes the cracking. Our double push-piece design on cylinders 3 and 4 allows the shorter length header to expand under these conditions and prevents cracking that has always been an issue on cylinders 3 and 4. FVD Brombacherheaders are the only headers on the market which feature this innovative design ensuring years of trouble free operation. Through countless hours...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,902.70
Make a selection
Posi quiet brake pads are manufactured using the same positive molding process utilized by original equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.
By offering a variety of friction compounds, the posi quiet brake pad program boasts the widest application coverage in the automotive aftermarket. The centric posi quiet brake program has a brake pad for every vehicle and driving style.
All posi quiet friction compounds have been specifically formulated to ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 BOXSTER 2009-11 CAYMAN 2006-08
Posi quiet brake pads are manufactured using the same positive molding process utilized by original equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.
By offering a variety of friction compounds, the posi quiet brake pad program boasts the widest application coverage in the automotive aftermarket. The centric posi quiet brake program has a brake pad for every vehicle and driving style.
All posi quiet friction compounds have been specifically formulated to ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 BOXSTER 2009-11 CAYMAN 2006-08
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
Performance friction front dimpled rotors Porsche 996 c2 | c4 99-05
Its quicker. Its patented. Its advanced technology that you cant get anywhere else.
performance friction has put decades into research and development, and incorporated that knowledge into ground-level savvy gained from their successes in motorsports. The result is an engineering marvel - the patented pfc rotor. The unique performance friction dimpled rotors use a combination of breakthrough technologies to eliminate noise and enhance rotor life.
special machining process assures the lowest possible run-out and thickness variation.
patented dimple design gives much higher brake bite.
exclusive high temperature meta...(choose a part on the right to read more)
General Fitment 911 1998-05 BOXSTER 1997-04
$1,128.87
Make a selection
Brombacher 986/s (TUV) stainless steel sport muffler
Facts:
- + 8 crank hp & + 10 crank torque
- 2 1/4" tubing (55 mm) straight through design for max. Power
- weighs 23 lbs. (10,4 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle while remaining within the db limits of the TUV.
- no dme programming necessary.
- ask for the mounting kit FVD mk 986 001wich includes all gaskets and clambs.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparall...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$2,068.00
Make a selection
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- catalytic bypass
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup car. Our exhaust ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,331.80
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- bypass-catalytics
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming necessary 2nd gen
The FVD...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $3,177.67
Make a selection
"brombacher" sport muffler for 997gt3/rs (sound version)
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 28 lbs. (12.7 kg)
- replaces stock side mufflers and stock center muffler
- 36 lbs (16.3 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no interior resonance
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
For reference:
997 GT3 OEM exhaust weight
Stock...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$3,128.40
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$16,528.60
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,996.00
Make a selection
- + 25 crank hp & + 27 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3"(90mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Weight savings:
997 GT3 OEM exhaust weight:
Stock primary ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,549.20
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|