PORSCHE 997 TURBO AIR CONDIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
From $298.78
Make a selection
Bmc air filters are designed and produced to ensure a higher air flow than original paper filters. In f1, for example, bmc cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with bmc cotton air filter, produced using the same technology and materials as the f1 air filters, are evident.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09
From $207.76
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,854.40
Make a selection
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
Kit includes:
Software dme exch., sport air filter
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software dme, sport air filter, sport header system.
Some models require oxygen sensor relocation.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 173kw (235hp) @ 6500rpm
Max. Torque - 280nm (207lbf ft) @ 4750rpm
Max. Speed - 257km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter, sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 178kw (242hp) @ 6500rpm
Max. Torque - 290nm (214lbf ft) @ 5000rpm
Max. Speed - 261km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,901.90
Make a selection
For 27 + years, FVD-Brombacherhas been setting the standard for PorscheĀ® engine building and tuning in Germany. Our deep understanding of the flat 6 PorscheĀ® engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importantly reliability.
Here is a small sample of our software advancements versus what is available on the market?
FVD software vs. The competition
- software programming can be done in the comfort and privacy of your own home or by one of our recommended dealers.
- you receive the FVD software file and the original (oem) software file f...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,584.70
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system and sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 206kw (280hp) @ 6400rpm
Max. Torque - 345nm (254lbf ft) @ 4900rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,205.30
Make a selection
Kit includes:
Software (fast load), FVD TUV version sport muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$13,971.04
Make a selection
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
Please note: this dme cannot be flashloaded. Dme must be sent to us.
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfec...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,094.50
Make a selection
Kit includes:
Software ( fast load), FVD export muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing
incre...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$15,715.50
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
An excellent performance upgrade. Lightened steel flywheels are susceptible to shattering under aggressive driving conditions. Because aluminum is lighter than steel, clutch masters is able to produce aluminum flywheels utilizing stock dimensions. Aluminum flywheels are perfect for road racers looking for quicker revs. It is also a nice complement for turbocharged cars experiencing lag.
Fits: 3.6l non-turbo only
Typical benefits of a lightweight flywheel for various engine types:
Reduced mass equals increased acceleration.
Increased supercharger efficiency due to less parasitic drag on the crank.
Improved mid-range torque in a normally aspirated engine due to not having ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,208.93
Make a selection
Kit includes:
Software (fast load), FVD TUV muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition timi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,076.70
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ( fast load), FVD sound muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,217.50
Make a selection
Experience the ultimate comfort of open-top driving with our authentic, high-quality wind deflector. It is designed to match the exact dimensions of the original for a perfect fit and optimal functionality. We have taken great care in adjusting both the height and width to ensure seamless integration with the 911 3.2 Carrera or 930 3.3 turbo models. The wind deflector operates in sync with the convertible top, opening and closing effortlessly for maximum user-friendliness.
Features:
High-quality aluminum frame with integrated mesh fabric
Reduced air turbulence for a pleasant driving experience
Prevents tangled hair and drafts on the neck
Improved effectiveness of your heater/air-conditioning
Minimizes d...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 239kw (325hp) @ 7000rpm
Max. Torque - 370nm (273lbf ft) @ 4500rpm
Max. Speed - 287km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.9s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,833.10
Make a selection
Our k-16 remanufactured turbo is cost competitive and is a direct replacement. Simply send us your original k16 turbochargers and a borg warner / kkk certified technician will remanufacture your turbo. The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will replace the turbine wheels, thrust bearings, install new seals, install new waste gates, recondition the internals and high speed balance the turbo. This ensures reliability and superior performance for many years to come. The remanufacturing is done on an exchange basis only. You must send us your original k16 turboc...(choose a part on the right to read more)
$2,194.50
Make a selection
K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|