PORSCHE 997 TURBO PERFORMANCE KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
The bbi autosport intercooler kit is a direct replacement upgrade for the Porsche 991 turbo. Designed with 3d modeling & computational fluid dynamics software, this bespoke intercooler features 3d printed and cfd tested end tanks, and offset cores for optimum flow and improved performance. The advanced 3d printing manufacturing process allows complex design and shapes to be produced for optimum flow. This kit is ready for installation (plug & play), using the stock plumbing and shrouds. When engineering, technology, and the right people are fueled by passion, the results are impressive.
Features
• 3d printed and cfd tested end tanks
• offset cores for optimum flow and improved performance
• designe...(choose a part on the right to read more)
$4,395.00
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter, sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 178kw (242hp) @ 6500rpm
Max. Torque - 290nm (214lbf ft) @ 5000rpm
Max. Speed - 261km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,901.90
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
With the success of our ypipe kit on the 996tt and 997tt, we did a hybrid and built this new part to work with the OEM intake on the 997.2 turbo. Airflow restrictions can always hamper performance and power and this part like any other does that as well. Our ypipe kit has smooth mandrel 3inch bends from a 4inch collector that goes to the throttlebody. For fitment reasons, we then neck down to 2.25inches to fit on the stock boost hoses. We have incorporated all fittings/sensors that are required.
Going off our original baseline using our mustang awd on 91octane and about 90f temp, the car made 455awhp and 443ft/lbs of torque. We did these test in standard mode, not sport to see the linear gains. With the addi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,199.95
Make a selection
Say good bye to that 993 hydraulic lifter flat spot in the higher rpm's with our mechanical rocker arm kit. This is a complete retrofit kit ready for installation. We also suggest our sprocket wheels kit FVD10550000 , in order to more accurately time the camshafts. Please note that it will fit only with sport camshaft for mechanical rocker arms and not with the original 993 camshafts. Complete kit consists of: 12 qty. Adjusting screws 12 qty. Hexagon nuts m8x1 mm 12 qty. Rocker arms 12 qty. Rocker arm shafts kit weighs 6.2 lbs. (2.8 kg) professional installation is required. Different manufacturing tolerances require an inspection of the free clearance of all parts!
This item may need to be sourced from ger...(choose a part on the right to read more)
General Fitment 911 1994-98
From $2,528.90
Make a selection
The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Torque is better than our other systems in the low range with the valves closed and horsepower is better with the valves open. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 27 crank hp & +25 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 3.5" (90 mm) dual oval, double walled polished tips included. - dual high quality ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $11,730.62
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
In the quest to create the most well balanced suspension for the 997 turbo, agency power has developed these sway bars to our specifications. The all wheel drive Porsche turbo cars naturally have a lot of under steer. Under steer is when you take a turn but your car keeps going outwards. With an awd car, getting the rear end around can be easily done with a larger sway bar. However you do not want to induce to much over steer as then you will be throttle steering or sent into a drift. With the combination of a properly balanced front and rear sway bar, your car will handle turns much more neutrally and quickly. The sway bars are designed to stiffen up the chassis as well to reduce body roll. Some times called â...(choose a part on the right to read more)
General Fitment 911 2005-08
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 173kw (235hp) @ 6500rpm
Max. Torque - 280nm (207lbf ft) @ 4750rpm
Max. Speed - 257km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Special intake hose kit for enhanced performance vehicles.
The original plastic tubes are restrictive on one side and have different lengths. Our reinforced suction hoses kit replaces the narrow and different lengths plastic tubes. This is a perfect homogeneous intake air guide from the intake manifold to the turbocharger and provides a smooth power delivery.
Design to withstand the vacuum pressure and will not collapse.
Made for the 993 GT2 racecars.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
Scavenging and aeration in the oil pan have been identified as a problem in the 996, 997 and Boxster models that experience high g-forces on the racetrack.
FVD has the solution:
The ?FVD motorsport? Oil pan has the baffling concept of the x51 oil pan. It also increases the oil capacity because the pan is deeper. This pan adds close to 3/4 of quart (0.6 liters) of oil over the original x51 pan. This allows for increased oil cooling and engine performance by preventing oil starvation and oil foaming.
The ?FVD motorsport? Oil pan is also designed with external cooling fins
Which helps to lower the oil temperature.
Models: Boxster, Cayman, 996 and 997 models (excludes 3.8 s, GT3 and turbocharged models).
...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
From $544.50
Make a selection
Kit includes:
Software dme, sport air filter, sport header system.
Some models require oxygen sensor relocation.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more)
General Fitment 911 1994-98
From $10,723.61
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Loud, low, deep tones with exaggerated turbo whistling and sinister gurgling and crackling off throttle. By far the best sound you can get out of your turbo, not to mention being able to shoot flames! The only real drawback is the drone in the cabin which we try to minimalize by stepping down the diameter in 3 stages. - + 35 crank hp & + 25 crank torque - 3 tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage. - weighs 7 lbs. (3,1 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - bolts up to the turbochargers, replacing both the cats and the muffler. - reduces turbo lag and backpressure. - exhaust tips are not included! Stock tips will fit. - intoxicating grow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $444.40
Make a selection
Kit includes:
Software dme exch., sport air filter
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ( fast load), FVD export muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing
incre...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$15,715.50
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system and sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 206kw (280hp) @ 6400rpm
Max. Torque - 345nm (254lbf ft) @ 4900rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,205.30
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
For the ultimate in 997.2 tt performance! Our level 3 kit makes a 670 hp daily driver a reality.
Kit includes:
- sports exhaust system with 200 cell sport catalysts.
- sport headers.
- turbocharger (set).
- software (fast load).
- sport air filter.
Oem:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3800ccm
Compression ratio - 9.8:1
Max. Power - 368kw (500hp) @ 6000rpm
Max. Torque - 650nm (479 lb ft) @ 1950-5000rpm
Max. Speed - 312km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s*
Tuning:
Max. Power - 493kw (670hp) @ 6500rpm
Max. Torque - 870nm (642lb ft) @ 3500rpm
Max. Speed - 330km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.2s
* based on Porsche ag power figures.
Whe...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$15,403.56
Make a selection
Kit includes:
Software dme (fast load), FVD TUV muffler (200 cell catalytics), bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 408kw (555hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4000-4500rpm
Max. Speed - 325km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche en...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,818.90
Make a selection
Kit includes:
Software ( fast load), FVD sound muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,217.50
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|