PORSCHE 997 TURBO PROPS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
The harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev. Mar 95, motor vehicle seat belt anchorages-performance requirements.
The harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking.
Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
Strength requirements for ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
In the quest to create the most well balanced suspension for the 997 turbo, agency power has developed these sway bars to our specifications. The all wheel drive Porsche turbo cars naturally have a lot of under steer. Under steer is when you take a turn but your car keeps going outwards. With an awd car, getting the rear end around can be easily done with a larger sway bar. However you do not want to induce to much over steer as then you will be throttle steering or sent into a drift. With the combination of a properly balanced front and rear sway bar, your car will handle turns much more neutrally and quickly. The sway bars are designed to stiffen up the chassis as well to reduce body roll. Some times called â...(choose a part on the right to read more)
General Fitment 911 2005-08
FVD Brombacher997.2 tt ?700 series? Upgraded turbos
Facts:
- modified compressor housing for the 3.8 l displacement
- modified & lightened billet compressor wheel with 12 blades
- 49.55 mm inducer
- 68 mm exducer
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for those already running FVD software
We start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,127.00
Make a selection
Race seat mounting option for 996/997/986/987
This product offers a simple installation process and adjustment flexibility.
This assembly mounts to the floor and places your seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see 846r907xseries brackets). This entire assembly, including race seat, can be easily installed and removed as a single unit for race events.
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09),...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 2005-08 BOXSTER 1997-04
Suspension has always been a specialty of agency power. With the current product list consisting of sway bars, control arms, sway bar links, and more, agency power has finally decided to add one more value to the Porsche suspension line up, the rear adjustable toe links. The stock suspension of the Porsche is a great start, but lacks a lot to improve cornering, adjust proper camber, and dial in the toe. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely then stock. The cnc machined links are made from 6061 aluminum.they are anodized blue to match other agency power products and then laser engraved with the ap logo...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.
The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat belt anchorages-performance requirements...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$1,638.45
Make a selection
This harness mount was developed in response to customer requests for a truss-style harness mount for the Porsche 996 coupe. The new 846 r1035 features water-jet machined aluminum construction much like our 846 r1025 harness truss. Like all brey-krause harness mounts, the 846 r1035 uses only existing mounting points. No drilling, welding or fabrication is required for installation. Once installed, the main portion can be unbolted in ten minutes, allowing use of the rear seats.
Wrap around installation of the belts.
The 846 r1035 been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev.mar 95, motor vehicle seat ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$1,017.60
Make a selection
The intercooler cores used in this product are of the most advanced design currently produced anywhere in the world. These cores are manufactured by the aerospace company that is currently producing the majority of cooling for formula 1 cars and lead the way in automotive heat exchangers.
The plate and fin design that has been applied to these Porsche 997.1 turbo intercoolers has been designed to allow the minimum pressure drop while shifting the maximum amount of heat in to the received air flow.
Standard extruded tube intercoolers will give reasonable heat dissipation when the internal fin is packed on a vehicle of this power however this will always lead to a high pressure drop and as such not truly ai...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,354.70
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
FVD Brombacher997.1 tt ?700 series? Upgraded turbos
Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,531.31
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $2,644.70
Make a selection
FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $2,644.70
Make a selection
Designed to prolong the life of your turbocharger, this greddy turbo timer allows your Porsche to idle the engine for a timed period, with the ignition key removed. This conveniently allows the engine oil and turbo center cartridge to cool down properly and prolong turbo and oil life. The run time can be programmed by the user or utilize it’s “full auto mode”, which estimate the driving rpm according to the vehicle’s alternator signal and then recommend a count down time. To prevent theft, the unit includes a parking brake and speedo hook-up which disengage operation if there is an attempt to move the vehicle without the key. The unit also includes a stopwatch/lap timer and attack modes along with a bui...(choose a part on the right to read more)
General Fitment 911 2005-08 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 944 1989-91 944 1985-88
FVD Brombacher997.1 tt ?700 series? Upgraded turbos
Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,860.38
Make a selection
Kit includes:
Software (fast load), FVD TUV version sport muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$13,971.04
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 426kw (580hp) @ 6500rpm
Max. Torque - 750nm (553lbf ft) @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.5s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$1,923.90
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Kit includes:
Software ( fast load), FVD export muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing
incre...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$15,715.50
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 507kw (690hp) @ 6500rpm
Max. Torque - 870nm (642lbf ft) @ 4500rpm
Max. Speed - 350km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.2s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$19,415.07
Make a selection
Kit includes:
Software ( fast load), FVD sound muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,217.50
Make a selection
Kit includes:
Software (fast load), FVD TUV muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition timi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,076.70
Make a selection
Kit includes:
Software dme (fast load), FVD TUV muffler (200 cell catalytics), bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 408kw (555hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4000-4500rpm
Max. Speed - 325km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche en...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,818.90
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 449kw (610hp) @ 6500rpm
Max. Torque - 780nm (575lbf ft) @ 4500rpm
Max. Speed - 340km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,643.24
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|