PORSCHE 997 TURBO TUBING
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.
Fits: Carrera 4s, 3.8l, 261kw (05-08), Carrera 4, 3.6l, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-0...(choose a part on the right to read more)
General Fitment 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 1997-04
Sport catalytic 100 cell pipes for use with our Brombacherexhaust system. This setup offers the ultimate in performance and sound for your turbo.
Gain of 21 hp and 18 lb/ft of torque
70 mm diameter tubing throughout
Please note- ecu programming will be necessary in order to avoid a check engine light.
General Fitment 911 TURBO/GT2 2007-09
$2,933.13
Make a selection
Loud, low, deep tones with exaggerated turbo whistling and sinister gurgling and crackling off throttle. By far the best sound you can get out of your turbo, not to mention being able to shoot flames! The only real drawback is the drone in the cabin which we try to minimalize by stepping down the diameter in 3 stages. - + 35 crank hp & + 25 crank torque - 3 tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage. - weighs 7 lbs. (3,1 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - bolts up to the turbochargers, replacing both the cats and the muffler. - reduces turbo lag and backpressure. - exhaust tips are not included! Stock tips will fit. - intoxicating grow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $444.40
Make a selection
Motorsport quality for the ultimate durability and power on the street and track! Developed and tested to survive the grueling environment of endurance racing. Shorter length headers tend to crack on cylinders 3 and 4 under the higher heat and vibration at the track. Shorter pipe length does not have room to expand like a longer tube header which causes the cracking. Our double push-piece design on cylinders 3 and 4 allows the shorter length header to expand under these conditions and prevents cracking that has always been an issue on cylinders 3 and 4. FVD Brombacherheaders are the only headers on the market which feature this innovative design ensuring years of trouble free operation. Through countless hours...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,902.70
Make a selection
Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Models: fits 996/997, Cayman, and Boxster.
Installation: attaches to r-9060, r-9063 side mounts.
Miscellaneous: this mount works with the r-9060, r-9063 side mount brackets in conjunction with aftermarket sliders and with the optional r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), turbo s, 390kw (11-), turbo, 368kw (10-), GT2 (08-09), turbo (07-09), carre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.
Fits: GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-0...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 1997-04
Motorsport quality for the ultimate durability and power on the street and track!
Stainless steel quality: wnr. 1.4301 (x5crni18-10), aisi 304 (v2a)
Developed and tested to survive the grueling environment of endurance racing.
Shorter length headers tend to crack on cylinders 3 and 4 under the higher heat and vibration at the track. Shorter pipe length does not have room to expand like a longer tube header which causes the cracking. Our double push-piece design on cylinders 3 and 4 allows the shorter length header to expand under these conditions and prevents cracking that has always been an issue on cylinders 3 and 4.
FVD Brombacherheaders are the only headers on the market which feature this inno...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,902.70
Make a selection
The bbi autosport Porsche 996 & 997 streetcup roll bar features a 2-piece design and 4130 chrome moly steel tubing (1.5" x .120" main hoop & 1.5" x 0.95" rear hoops) for excellent strength to weight ratio. Taking a sensible design approach, the 2-piece construction allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory bose subwoofers. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes "x" braces on both front and rear sections and each joint has been meticulously tig welded by hand. Bolt-in installation is accomplished by usin...(choose a part on the right to read more)
$2,395.00
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2-rs.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest he...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $10,703.00
Make a selection
Product details:
Throaty sports car sound with significant power improvement
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1994-1998)
-noticeably increases horsepower by 15 whp
-saves 20 lbs from the rear of the vehicle
-includes fabspeed deluxe tips: polished angle-cut ovals
-2.5" tubing throughout vs. 2.18" factory tubing
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1994-98
From $1,595.00
Make a selection
Kit includes:
Software ( fast load), FVD export muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing
incre...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$15,715.50
Make a selection
Kit includes:
Software (fast load), FVD TUV version sport muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$13,971.04
Make a selection
Kit includes:
Software (fast load), FVD TUV muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition timi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,076.70
Make a selection
Sport catalytic 100 cell pipes for use with our Brombacherexhaust system. This setup offers the ultimate in performance and sound for your turbo.
Gain of 21 hp and 18 lb/ft of torque
70 mm diameter tubing throughout
Please note- ecu programming will be necessary in order to avoid a check engine light.
General Fitment 911 TURBO/GT2 2007-09
$2,932.72
Make a selection
Kit includes:
Software ( fast load), FVD sound muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,217.50
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, the exhaust material (t 316 stainless) meets the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world. - + 15 crank hp & + 13 crank torque. - 2 3/4 tubing (70mm) for maximum power. - weighs 6.61 lbs. (3 kg). - catalytic look. - German v...(choose a part on the right to read more)
General Fitment 911 1989-94
From $470.80
Make a selection
- + 15 crank hp & + 12 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 8.0 lbs. (3.6 kg)
- replaces OEM primary muffler.
- t 304 stainless steel
- 20% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
- completely adjustable for simple installation.
- made in europe.
Tech tip: it's a good idea to replace your primary muffler clamps & hardware with this upgrade. FVD mk9 640 01
Fits: cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedit...(choose a part on the right to read more)
General Fitment 911 1989-94
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
- + 12 crank hp & + 8 crank torque
- 2 3/4" (68.5 mm) diameter tubing (reduces thermal stress)
- weighs 1.1 lbs. (0.5 kg)
- replaces OEM secondary muffler.
- t 304 stainless steel
- 40% increase in sound (decibels) with a lower deeper tone.
- ecu programming is not necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust.
- made in europe.
Tech tip: it's a good idea to replace your muffler and exhaust tip clamps & hardware with this upgrade. You can order our prepackaged 964 muffler installation kit comprised of genuine Porsche® parts, simply add part # FVD mk9 640 01 to your order.
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), ...(choose a part on the right to read more)
General Fitment 911 1989-94
Motorsport quality for the ultimate durability and power on the street and track! Developed and tested to survive the grueling environment of endurance racing. Shorter length headers tend to crack on cylinders 3 and 4 under the higher heat and vibration at the track. Shorter pipe length does not have room to expand like a longer tube header which causes the cracking. Our double push-piece design on cylinders 3 and 4 allows the shorter length header to expand under these conditions and prevents cracking that has always been an issue on cylinders 3 and 4. FVD Brombacherheaders are the only headers on the market which feature this innovative design ensuring years of trouble free operation. Through countless hours...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
From $2,171.47
Make a selection
Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, the exhaust material (t 316 stainless) meets the standards of the German independent testing agency TUV; whose quality standards are among some of the strictest in the world. - + 15 crank hp & + 13 crank torque. - 2 3/4 tubing (70mm) for maximum power. - weighs 5 lbs. (2.3 kg). - sleek single pipe design to...(choose a part on the right to read more)
General Fitment 911 1989-94
From $457.60
Make a selection
Brombacher 955 Cayenne® turbo ?sound version? Sport muffler with valves.
- + 25 crank hp & + 19 crank torque*
- 2.5" tubing (63.5mm) straight through design for max. Power
- weighs 30 lbs. (14,0 kg)
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality which enhances 4.8 l turbo Porsche® sound.*
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- absolutely no drone in the cabin.
- exhaust tips are not included. Stock tips will fit or FVD quad 4'' (100mm) round tips are sold separately.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
* in conjunction with secondary bypass pipe...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$4,519.42
Make a selection
Secondary catalytic bypass for Cayenne turbo and turbo s 2003-2006. This kit replaces the first set of restrictive factory catalytics. They increase horsepower and torque while reducing turbo lag and give the Cayenne a great sound.
- + 18 crank hp & + 17 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 25 lbs. Weight savings
- t 316 stainless steel for improved durability over t 304
- includes factory style hangers
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no check engine light
For a even more aggressive growl purchase a sport muffler!
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced f...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$1,653.30
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|