PORSCHE 997T A ARM
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Diese buchse ersetzt an ihrem vorderen querlenker die hintere buchse. Wie oe in 65 shore harte. Preis pro satz, pro querlenker wird ein satz benotigt.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Diese buchse ersetzt an ihrem vorderen querlenker die mittlere buchse. Es handelt sich bei dieser buchse um einen hartegrad von 85 shore wie original bei den rs -modellen ( GT3 rs, GT2 rs ) preis pro stuck, pro querlenker wird ein stuck benotigt.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Diese buchse ersetzt an ihrem vorderen querlenker die mittlere buchse. Wie oe in 65 shore harte. Preis pro stuck, pro querlenker wird ein stuck benotigt.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Diese buchse ersetzt an ihrem vorderen querlenker die hintere buchse. Es handelt sich bei dieser buchse um einen hartegrad von 85 shore wie original bei den rs -modellen ( GT3 rs, GT2 rs ) preis pro stuck, pro querlenker wird ein stuck benotigt.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
With the success of our ypipe kit on the 996tt and 997tt, we did a hybrid and built this new part to work with the OEM intake on the 997.2 turbo. Airflow restrictions can always hamper performance and power and this part like any other does that as well. Our ypipe kit has smooth mandrel 3inch bends from a 4inch collector that goes to the throttlebody. For fitment reasons, we then neck down to 2.25inches to fit on the stock boost hoses. We have incorporated all fittings/sensors that are required.
Going off our original baseline using our mustang awd on 91octane and about 90f temp, the car made 455awhp and 443ft/lbs of torque. We did these test in standard mode, not sport to see the linear gains. With the addi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,199.95
Make a selection
TUV version
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90mm) tips and are made for this muffler. Kindly order bes 997 160 41s separately.
FVD le...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,479.10
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
In the quest to create the most well balanced suspension for the 997 turbo, agency power has developed these sway bars to our specifications. The all wheel drive Porsche turbo cars naturally have a lot of under steer. Under steer is when you take a turn but your car keeps going outwards. With an awd car, getting the rear end around can be easily done with a larger sway bar. However you do not want to induce to much over steer as then you will be throttle steering or sent into a drift. With the combination of a properly balanced front and rear sway bar, your car will handle turns much more neutrally and quickly. The sway bars are designed to stiffen up the chassis as well to reduce body roll. Some times called â...(choose a part on the right to read more)
General Fitment 911 2005-08
Having the perfect sounding exhaust system that helps gain power is not the easiest task at hand. turbocharged cars do not need any backpressure and ideally perform best with no restriction off of the turbo exhaust outlet. however, this would cause your car to be incredibly loud and not comfortable for daily use. agency power has developed this exhaust system to give Porsche 997 turbo owners a race tone exhaust without the dreaded drone in the 2200-2800 rpm range. the muffler system is designed to keep noise level down inside the cabin but roar at full throttle. the exhaust features high flow 200 cell catalytic converters. the cats work with the factory o2 primary and secondary sensors to not throw a che...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,999.95
Make a selection
These fabspeed catbypass pipes save 25 lbs from the rear end of the car. Perfect for street/race, exploits maximum power. Improved throttle response and more aggressive sports car sound. Used by many rolex grand am cup racing teams and pca/poc/de racers. Easy bolt-on/bolt-off installation; hardware included. Will not work with factory mufflers or any other aftermarket 997tt exhaust system.
Note: for off-road use only! Cel may come on but car will run great. Optional 02 spacers available to keep c.e.l. Off.
General Fitment 911 TURBO/GT2 2001-05
From $895.00
Make a selection
Agency power has developed a selection of products that set the standards for Porsche turbo tuning. All new, the agency power Porsche 996tt 997tt headers fit the 2001 and up turbo vehicles. Made from 321 stainless steal, the headers are complete polished. Flanges are laser cut for a precision fit. Each header features a highly engineered collector to keep your turbo spooling faster then stock while creating additional horsepower and torque. Tested on a 2001 996tt with factory k16 turbos, these headers added almost 10 wheel horsepower. as tested on a 997tt, the headers gained almost 20 ft/lbs of torque.
In addition to improving performance, the headers also change the tone of your vehicle. Adding a deeper so...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 2005-08
$1,249.95
Make a selection
Kit includes:
Software ( fast load), FVD sound muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,217.50
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
997 GT3 rear spoiler fits 997turbo includes: deck lid, aluminum upright, 3rd brake light housing and kevlar/carbone wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass, kevlar-carbone. Also available with wing blade in fiber (gfk) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x
This item may need to be sourced from Germany and would take 2-4 ...(choose a part on the right to read more)
$6,528.50
Make a selection
Kit includes:
Software dme (fast load), FVD TUV muffler (200 cell catalytics), bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 408kw (555hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4000-4500rpm
Max. Speed - 325km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche en...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,818.90
Make a selection
Kit includes:
Software ( fast load), FVD export muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing
incre...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$15,715.50
Make a selection
Kit includes:
Software (fast load), FVD TUV muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition timi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,076.70
Make a selection
Also included with our latest software version for the 997tt & GT2 is a free single user license for durametric basic software, allowing you to read out and diagnose fault conditions on your vehicle.
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 390kw (530hp) @ 6000rpm
Max. Torque - 720nm (531lbf ft) @ 3000-4000rpm
Max. Speed - 320km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.7s
FVD-Brombacheris proud to announce that we are now offering do-it-yourself flash load ecu ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,754.50
Make a selection
Precision Porsches wide body kit for the Boxster 986 is made from high quality fiberglass that is very durable and strong. Made in the usa, the wide body kit includes:
Rear quarter panels - 2.5inch wider, with 997tt or 987 style vents.
Side skirts (pair)
997tt style rear bumper
996 GT2, 996 t/a, 996 GT3, or 997 GT3 style front bumper.
This kit comes unpainted and it is highly recommended to be installed by a professional body shop with aftermarket experience. Please select the options allowed for this kit. This kit is also available without a front bumper.
This kit ships via oversized freight only.
General Fitment BOXSTER 1997-04
$7,154.99
Make a selection
Torque solution dogbone rear control arms
applications: 911 996/997 all
Torque solution rear dogbone kit is designed to correct the rear suspension geometry on your lowered Porsche 996/997. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. If you plan to track your car or get the full life of your tires these are a must have.
Made of 6061-t6 aluminum w/ fk rod ends. 4 links total included in each package requires no modification to chassis, direct bolt o...(choose a part on the right to read more)
General Fitment 911 1998-05
So you already own a 996 turbo Porsche but want to update the look? Precision Porsche has this full conversion aero kit that does just that. It takes your 996tt and transforms it into a 997tt. These parts are made from high quality and durable composite fiberglass. Except where mentioned, all parts are aftermarket.
Kit includes:
Gt style front bumper complete with OEM hood grill, front marker light extensions and lower lip spoiler
Pair of GT style front fenders with vent and OEM gas assembly OEM 997 hood pair of GT style side skirts 997tt rear 1/4 panels with intercooler vents 997 GT style rear bumper 997 GT style rear deck and top wing
General Fitment 911 TURBO/GT2 2001-05
$14,850.00
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 997tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has just released their new system of exhaust design with x-cellerator cross-flow exhaust system. The cross flow designed to offer the discerning Porsche enthusiast the ultimate exhaust system with a number of performance and sound options in one complete package. The cross-flow designed by combining the exhaust pulses from both sides of the Porsche boxer motor with an "x" of "cross-flow" at the pounds of weight (full syst...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,773.25
Make a selection
The vivid racing stage 3 horsepower kit for the Porsche 997 turbo gives you everything you need to get the job done without touching the turbos. Giving you faster turbo spool, huge torque increase, aggressive pull through the top end, better sound, better throttle response, cooler running temperatures.
Every turbocharged vehicle needs to breathe well and have less restriction after the turbos to produce strong horsepower. Our stage 3 horsepower kit includes all the parts from stage 2 with the addition of our 800hp intercoolers, larger ctt 78mm throttlebody and plenum, and our full cold air intake kit. We also include a set of our high flow racing headers to further the exhaust performance.
The fina...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$12,150.00
Make a selection
Kit includes:
Software dme (fast load), FVD sound muffler (200 cell catalytics), bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 408kw (555hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4000-4500rpm
Max. Speed - 325km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche ...(choose a part on the right to read more)
General Fitment 911 2005-08
$6,818.90
Make a selection
Kit includes:
Software (fast load), FVD TUV version sport muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$13,971.04
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|