PORSCHE BOXSTER RECO ENGINES
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Known as: water reservoir
View/Change Diagram
From $133.62
Make a selection
There are not many warning signs of an impending ims failure short of a “death rattle” that occurs as the bearing fails and comes apart. These kits replace the factory sealed bearing with a new, severe duty custom ceramic hybrid roller ball bearing for reduced friction and superior performance in poorly lubricated operating conditions and replaces the factory ims flange hub, bearing support, and fastener with a stronger, revised billet chromoly assembly. The center bearing support also receives an increase in size and no longer is cut for the o-ring that keep engine oil from leaking out of the engine - we have relocated the o-ring to the ims hub flange for added strength to the center stud & bearing support...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche® engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche® engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importantly reliability.
Here is a small sample of our software advancements versus what is available on the market?
FVD software vs. The competition
- software programming can be done in the comfort and privacy of your own home or by one of our recommended dealers.
- you receive the FVD software file and the original (oem) software file f...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,584.70
Make a selection
There are not many warning signs of an impending ims failure short of a “death rattle” that occurs as the bearing fails and comes apart. These kits replace the factory sealed bearing with a new, severe duty custom ceramic hybrid roller ball bearing for reduced friction and superior performance in poorly lubricated operating conditions and replaces the factory ims flange hub, bearing support, and fastener with a stronger, revised billet chromoly assembly. The center bearing support also receives an increase in size and no longer is cut for the o-ring that keep engine oil from leaking out of the engine - we have relocated the o-ring to the ims hub flange for added strength to the center stud & bearing support...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 1998-05 911 1987-89
Our billet aluminum strut mounts are a must when upgrading to a race suspension such as moton or bilstein pss9/10. The OEM units flex and move during cornering which causes spongy handling characteristics. Our engineered mounts will add more precise handling and road feel. Each of our components are cnc machined from 6061-t6 aluminum, assembled with stainless steel spherical bearings and hard anodized.
Note: recommended for aftermarket threaded racing struts such as bilstein, moton, etc. Not for use with stock struts.
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08
Product details:
Dramatically improve sports car sound and throttle response with upgraded maxflo mufflers and inlet tubing. includes deluxe bolt-on tips in polished or black finish.
Features:
-fits all Porsche 986 Boxster / s vehicles (1997-2004)
-available with polished or black chrome deluxe dual-style tips or optional Carrera GT style tip upgrade
-improves power by 5 whp and 7 ft-lbs of torque
-saves 30 lbs from the rear of the vehicle compared to the full OEM exhaust system
Note: 1997-1999 986 Boxster maxflo street performance exhaust includes 200 cell tri-metallic sport catalytic converters to remain emission compliant with ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $2,295.00
Make a selection
Porsche introduced the 987.1 Boxster s with the 3.2 liter engine from the 986 Boxster s. This plenum version provides impressive power gains throughout the entire power band, especially in the midrange where we enjoy it most. The 74mm Boxster s ipd plenum and upgraded 74mm (from 68mm) throttle body (must purchase seperately) is recommended for Boxster s enthusiasts looking for considerable performance gains. Performance gains can be felt throughout the entire power band making the Boxster driving experience even more visceral.
The ipd Boxster s plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Boxster driving experience. The 74mm ipd plenum ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,208.25
Make a selection
Product details:
Dramatically improve sports car sound and throttle response with upgraded maxflo mufflers and inlet tubing. includes deluxe bolt-on tips in polished or black finish.
Features:
-fits all Porsche 986 Boxster / s vehicles (1997-2004)
-available with polished or black chrome deluxe dual-style tips or optional Carrera GT style tip upgrade
-improves power by 5 whp and 7 ft-lbs of torque
-saves 30 lbs from the rear of the vehicle compared to the full OEM exhaust system
Note: 1997-1999 986 Boxster maxflo street performance exhaust includes 200 cell tri-metallic sport catalytic converters to remain emission compliant with ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $2,795.00
Make a selection
Product details:
Free-flowing headers without catalytic converters; designed for maximum power and exhaust flow for race and track applications.
Features:
-fits all 986 Boxster / s vehicles 2000-2004
-increases power and improves throttle response
-saves weight from the rear of the vehicle compared to the full OEM exhaust
-constructed from equal-length t304 stainless steel c.n.c. Mandrel-bent tubing for improved torque and equalized engine pulsing
-f1 style merge collectors for maximum exhaust flow and better scavenging
-will work with stock muffler or any aftermarket cat-back exhaust system designed to fit like the oem
-direct...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $1,295.00
Make a selection
Porsche Boxster, Cayman, and 911 (986/987/996) ln spec k1 connecting rods for 2.5, 2.7, 3.2, & 3.4 m96/m97 engines. Replaces factory connecting rod part number 99610397501.
Designed as a performance replacement lightweight connecting rod for added strength to prevent on-track failures common to the stock m96/m97 connecting rod.
Don't risk a connecting rod failure on your $15-20k rebuild. The factory connecting rod utilized in the m96 and m97 engine is manufactured using a powdered metal process and feature cracked caps. This method of manufacturing helps reduce cost, but results in a connecting rod with a limited fatigue life and that is not rebuildable.
Suitable for stock, street driven rebuilds or b...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05
$1,185.00
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
FVD?s ims bearing vs. The competition:
There is a lot of information online about ims bearing failures, why they occur, how to detect them, how to install an aftermarket bearing, etc. So there is no need for us to go into depth on the subject. Our stance is to sell a top of the line bearing produced to higher specifications than what was originally in the car and is currently available on the market.
FVD ims bearings are manufactured by skf in Germany and are highest rated skf ?super-precision? Class of bearings which are characterized by:
High-speed capability
High load carrying capacity
High stiffness
Low friction
Our single row ceramic bearings consist of the highest grade ball material which...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
Product details:
Free-flowing headers without catalytic converters; designed for maximum power and exhaust flow for race and track applications.
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-constructed from equal-length t304 stainless steel c.n.c. Mandrel-bent tubing for improved torque and equalized engine pulsing
-more power and torque across the rpm band and dramatically improved sports car sound
-composite gaskets are included for a leak proof seal
-direct replacement for the OEM headers with no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note: the 98...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $1,995.00
Make a selection
Kit includes:
Software ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 173kw (235hp) @ 6500rpm
Max. Torque - 280nm (207lbf ft) @ 4750rpm
Max. Speed - 257km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,053.80
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,861.00
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter, sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 178kw (242hp) @ 6500rpm
Max. Torque - 290nm (214lbf ft) @ 5000rpm
Max. Speed - 261km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,901.90
Make a selection
The 74mm Boxster s/Cayman s plenum utilizes the factory 74mm throttle body. This version provides impressive power gains throughout the entire power band, especially in the midrange where it's most critical and most enjoyed.
The 74mm Boxster s/Cayman s plenum application is recommended for enthusiasts looking for considerable performance gains without pushing the performance envelope. Max horsepower is 14 and max torque is 12 which all comes in around 5600 rpm. Power gains are realized throughout the entire power band without any loses in power.
The ipd Boxster s/Cayman s plenum will provides the most impressive power gains of any engine upgrade available and will truly transform your Cayman driving expe...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08 BOXSTER 2005-08
Replace factory airbox and throttle body inlet pipe to lower intake temperature, increase power, and improve engine intake sound
Features:
Fits all Porsche 987.2 Boxster/Cayman vehicles (2009-2012)
Increases fuel economy
Cleans up and de-clutters engine bay for easier servicing
Dramatic power increase throughout rpm range
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
Disclaimer: fabspeed recommends having this intake system installed by a qualified technician, as the engine must be lowered from the vehicle in order to remove the factory air box in one piece. alternatively, the factory air box can be cut into s...(choose a part on the right to read more)
General Fitment CAYMAN 2009-12 BOXSTER 2009-11
From $795.00
Make a selection
Kit includes:
Software ecu software (flashclient cable), sport air filter and sport header system.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
This is a universal 4-wire oxygen sensor; it requires the cutting of the factory plug and wiring in this replacement. The submersible Bosch patented* connection system has undergone rigorous quality testing to uscar standards. Tests have proven that this watertight system protects against contaminaiton and withstands the effects of extreme temperatures and engine vibration. User friendly instructions, no special tools are required to install. Just strip wires & go! Specially designed heat resistant - posi-lock connectors can easily be taken apart and recon- nected in case of wiring mistake.
General Fitment 911 1994-98 911 1998-05 BOXSTER 1997-04
From $97.35
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system and sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 206kw (280hp) @ 6400rpm
Max. Torque - 345nm (254lbf ft) @ 4900rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,205.30
Make a selection
Kit includes:
Ecu software (flashclient cable), sport air filter, headers, catalytics, TUV exhaust system with 200 cell catalytics
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 176kw (240hp) @ 6400rpm
Max. Torque - 270nm (199lbf ft) @ 4700-6000rpm
Max. Speed - 256km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.2s
Tuning:
Max. Power - 195kw (265hp) @ 6500rpm
Max. Torque - 295nm (218lbf ft) @ 5000-5500rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine natur...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,358.90
Make a selection
Kit includes:
Ecu software (flashclient cable) and sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 206kw (280hp) @ 6200rpm
Max. Torque - 320nm (236lbf ft) @ 4700-6000rpm
Max. Speed - 268km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.5s
Tuning:
Max. Power - 215kw (293hp) @ 6500rpm
Max. Torque - 335nm (247lbf ft) @ 5000-6000rpm
Max. Speed - 271km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,153.90
Make a selection
This K&N performance gold filter fits the billet full-flow spin-on filter adapter kit, part number r10601. This filter uses a synthetic resin impregnated filter media capable of filtering lower micron particles while not restricting oil flow. Performance gold oil filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 2005-08 911 1998-05
Kit includes:
Ecu software (flashclient cable), sport air filter, headers, catalytics, TUV exhaust system with 200 cell catalytics
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 206kw (280hp) @ 6200rpm
Max. Torque - 320nm (236lbf ft) @ 4700-6000rpm
Max. Speed - 268km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.5s
Tuning:
Max. Power - 224kw (305hp) @ 6500rpm
Max. Torque - 345nm (254lbf ft) @ 5000-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine natur...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,358.90
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|