PORSCHE CAYENNE PORSCHE AIR COMPRESS KIT
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Our 911 sanden kits offer many benefits over the original york compressor found on the early 911 and 930 up through 1983. The sanden uses a "wobble-plate" to move five smaller pistons as compared to the york that uses a crankshaft to move two large pistons. The sanden wobble-plate design requires less horse power to turn and is a better match for the condenser area. Our sanden kit uses less engine compartment space and less horse power to turn. You will notice it runs smoother and quieter and improves system efficiency. The sanden compressor and it's mounting bracket bolt directly to the original york sub-plate. You can purchase our sanden kits in four configurations to match your objectives and budget: from...(choose a part on the right to read more)
General Fitment 911 1978-83 930 1975-77 911 1974-77
Kit includes:
Ecu software with handheld flashtool, 2x sport air filter
Factory:
Engine - v8 twin-turbo
Capacity - 4511ccm
Compression ratio - 9,5:1
Max. Power - 331kw (450hp) @ 6000rpm
Max. Torque - 620nm (457 lbf ft) @ 2250-4750rpm
Max. Speed - 266km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.6s
FVD level 1 tuning:
Max. Power - 375kw (510hp) @ 6000rpm
Max. Torque - 710nm (524 lbf ft) @ 4000rpm
Max. Speed - 275km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 5.2s
- a simple handheld obd2 tool is provided to flash your Cayenne conveniently at home!
- software is completely reversible and undetectable for dealer service / diagnostics / extended warranty.
- dyno proven and comprehens...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$1,076.90
Make a selection
With only an FVD sport motronic and sport filters you can increase your Cayenne s horsepower to 360 (a 20 hp gain!). Even with this added power your Cayenne will retain factory drivability and day in, day out reliability.
Kit includes:
Ecu software with handheld flashtool, 2xsport air filter
Genuine:
Engine - v8
Capacity - 4511ccm
Compression ratio - 11,5:1
Max. Power - 250kw (340hp) @ 6000rpm
Max. Torque - 420nm @ 2500-5500rpm
Max. Speed - 242km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 7.2s
Tuning:
Max. Power - 265kw (360hp) @ 6000rpm
Max. Torque - 445nm @ 4500rpm
Max. Speed - 252km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.8s
- a simple handheld obd2 tool is provided to ...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$1,087.90
Make a selection
kit includes:
Sport motronic dme exch, sportairfilter (2), Cayenne turbo 70mm GT sport exhaust system, sport turbochargers (2).
FVD level 4 kit for the Cayenne turbo produces 600bhp while keeping stock driveability! This kit is the ultimate Cayenne turbo kit for both performance and sound!
Genuine:
Engine - v8 twin-turbo
Capacity - 4511ccm
Compression ratio - 9,5:1
Max. Power - 331kw (450hp) @ 6000rpm
Max. Torque - 620nm (457 lbf ft) @ 2250-4750rpm
Max. Speed - 266km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.6s
Tuning:
Max. Power - 441kw (600hp) @ 6000rpm
Max. Torque - 800nm (590 lbf ft) @ 4000rpm
Max. Speed - 300km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
- a sim...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$23,010.25
Make a selection
FVD's level 2 kit for the Cayenne adds 35bhp while keeping stock driveability! This kit brings a whole new life to the Cayenne with added performance and sound! The muffler and catalytics included in this kit give the truck the agreesive exhaust note to backup the added performance.
Genuine:
Engine - v6
Capacity - 3189ccm
Compression ratio - 11,5:1
Max. Power - 184kw (250hp) @ 6000rpm
Max. Torque - 310nm @ 2500-5500rpm
Max. Speed - 214km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 9.7s
Tuning:
Max. Power - 210kw (285hp) @ 6000rpm
Max. Torque - 345nm @ 5500rpm
Max. Speed - 225km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 8.8s
Kit includes:
Ecu software with handheld flashtool., sport...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$4,808.95
Make a selection
With only an FVD sport motronic and sport filters you can increase your Cayenne horsepower to 270 (a 20 hp gain!). Even with this added power your Cayenne will retain factory drivability and day in, day out reliability.
Kit includes:
Ecu software with handheld flashtool, 2x sport air filter
Genuine:
Engine - v6
Capacity - 3189ccm
Compression ratio - 11,5:1
Max. Power - 184kw (250hp) @ 6000rpm
Max. Torque - 310nm @ 2500-5500rpm
Max. Speed - 214km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 9.7s
Tuning:
Max. Power - 199kw (270hp) @ 6000rpm
Max. Torque - 335nm @ 4000-5000rpm
Max. Speed - 220km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 9.2s
- a simple handheld obd2 tool is provided t...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$1,087.90
Make a selection
kit includes:
Ecu software with flashclient cable., sport air filters (2), GT sport exhaust system including installation kit, sport intercoolers and upgraded sport turbchargers for the ultimate in Cayenne performance
Factory:
Engine - v8 twin-turbo
Capacity - 4806ccm
Compression ratio - 10,5:1
Max. Power - 368kw (500hp) @ 6000rpm
Max. Torque - 700nm (516 lbf ft) @ 2250-4500rpm
Max. Speed - 275km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.1s
Tuning:
Max. Power - 650 hp @ 4470rpm
Max. Torque - 1030 nm (760 lb. Ft) @ 4320rpm
Max. Speed - 310km/h
Max. Rpm - 6700upm
Acceleration 0-100km/h - 4,1s
For 27 + years, FVD-Brombacherhas been setting the standard for PorscheĀ® engine bui...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$23,068.33
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,792.70
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Ksports circuit pro damper system provides the ultimate in adjustability for enthusiasts and professionals alike, who are wishing to have the maximum in performance and durability. With years of engineering, testing and development, the circuit pro damper system has been perfected in virtually every facet of motorsports, ranging from drifting to time attack or circuit driving. The uncompromising range of adjustability on the circuit pro damper system makes it possible to win at the track, yet drive daily on the street as well.
The key component to the circuit pro damper system is its utilization of remote reservoirs that provide separate adjustments for rebound and compression, as well as nitrogen gas pre...(choose a part on the right to read more)
General Fitment 911 1998-05
$2,856.60
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software
FVD brombachers 996 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compressor backing plate is modified. This is done to replace the factory compressor wheel with a larger, mo...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,686.76
Make a selection
K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharg...(choose a part on the right to read more)
$2,976.60
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-pro...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
K-16/24 turbo (up to 555 hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbochar...(choose a part on the right to read more)
$2,976.60
Make a selection
K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection
Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection
K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: - modified compressor housing and backing plate - modified & lightened high flow compressor wheels. - remanufactured by kkk / borg warner certified technicians - free software update for those already running FVD software. FVD brombachers 996 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
From $2,217.60
Make a selection
Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|