PORSCHE CAYENNE TURBO CAR OPTIONS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Sport rear silencer for Porsche Cayenne 958 turbo with integrated exhaust flaps to be used with either oe flap control (if available) or with cargraphic's optional performance flap control system.
Cargraphic sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and torque a better response characteristic. Further evidence of improvements made, are recognised through an enhancedaccoustic and weight reduction.
Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation.
Performance: 11kw(15ps) more power and 25nm additional torque.
...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$5,190.08
Make a selection
Ecu software with flashclient cable, sport air filters (2)
Genuine:
Engine - v8
Capacity - 4806 ccm
Compression ratio - 12,5:1
Max. Power - 405hp (298kw) @ 6500rpm
Max. Torque - 368 lb. Ft (500nm) @ 3500rpm
Max. Speed - 157 mph (253km/h)
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 6,1s
Tuning:
Max. Power - 425hp (312kw) @ 6000rpm
Max. Torque - 388 lb. Ft (520nm) @ 4500rpm
Max. Speed - 165 mph (265km/h)
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5,7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfe...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$1,219.90
Make a selection
kit includes:
Ecu software with flashclient cable., sport air filters (2), GT sport exhaust system including installation kit, sport intercoolers and upgraded sport turbchargers for the ultimate in Cayenne performance
Factory:
Engine - v8 twin-turbo
Capacity - 4806ccm
Compression ratio - 10,5:1
Max. Power - 368kw (500hp) @ 6000rpm
Max. Torque - 700nm (516 lbf ft) @ 2250-4500rpm
Max. Speed - 275km/h
Max. Rpm - 6500rpm
Acceleration 0-100km/h - 5.1s
Tuning:
Max. Power - 650 hp @ 4470rpm
Max. Torque - 1030 nm (760 lb. Ft) @ 4320rpm
Max. Speed - 310km/h
Max. Rpm - 6700upm
Acceleration 0-100km/h - 4,1s
For 27 + years, FVD-Brombacherhas been setting the standard for PorscheĀ® engine bui...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$23,068.33
Make a selection
Sport rear silencer for Porsche Cayenne 957 turbo / turbo s with integrated exhaust flaps to be used with either oe flap control (ifavailable) or with cargraphic's optional performance flap control system.
Cargraphic sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and torque a better response characteristic. Further evidence of improvements made, are recognised through an enhancedaccoustic and weight reduction.
Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation.
Features:
Comes with fitting kit and a stainless st...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$3,408.08
Make a selection
Sport rear silencer for Porsche Cayenne 958 turbo with integrated exhaust flaps to be used with either oe flap control (if available) or with cargraphic's optional performance flap control system.
Cargraphic sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and torque a better response characteristic. Further evidence of improvements made, are recognised through an enhancedaccoustic and weight reduction.
Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation.
Performance: 11kw(15ps) more power and 25nm additional torque.
...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$4,447.58
Make a selection
Sport rear silencer for Porsche Cayenne 955 turbo / turbo s with integrated exhaust flaps to be used with either oe flap control (ifavailable) or with cargraphic's optional performance flap control system.
Cargraphic sport rear silencers are concipated as absorptive silencers which reduce exhaust back pressure drastically. The result is besides more power and torque a better response characteristic. Further evidence of improvements made, are recognised through an enhancedaccoustic and weight reduction.
Strenghtened brackets as well as the olive- and slide system ensure anexact adjustment, which guarantees a stressless installation.
Features:
Comes with fitting kit and a stainless st...(choose a part on the right to read more)
General Fitment CAYENNE 2003-06
$3,259.58
Make a selection
Kit includes:
Ecu software (flashclient cable), sport air filter, headers, catalytics, TUV exhaust system with 200 cell catalytics
Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 206kw (280hp) @ 6200rpm
Max. Torque - 320nm (236lbf ft) @ 4700-6000rpm
Max. Speed - 268km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.5s
Tuning:
Max. Power - 224kw (305hp) @ 6500rpm
Max. Torque - 345nm (254lbf ft) @ 5000-6000rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine natur...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$8,358.90
Make a selection
Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 turbo 07+
The new variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound dampening options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
features:
- independently adjustable dampening technology -rebound and compression dampening
- inox-line stainless steel technology at no extra charge
- individual height adjustm...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$11,765.24
Make a selection
Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.
Fits: Carrera 4s, 3.8l, 261kw (05-08), Carrera 4, 3.6l, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-0...(choose a part on the right to read more)
General Fitment 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 1997-04
Please note! Gas pedal extensions and floor boards are not included!
Gas pedal extension options:
Order part # 1112 pe7071 for silver
Order part # 1112 pe7071red for red
Order part # 1112 pe7071blk for black
Fits: 912 (66-69), turbo 3.3 (78-89), turbo 3.0 (75-77), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rsr 3.0l (74-74), rs 3.0l (74-74), rs 2.7 (74-76), 911 2.7 (74-77), rsr 2.8l (73-73), rs (73-73), 911s (70-73), 911tk (73-73), 911tv (72-73), 911te (72-73), 911e (70-73), 911t (70-71), 911l (68-68), 911s (67-69), 911e (69-69), 911t (68-69), 911 (65-68)
General Fitment 912 1965-69 911 1970-73
High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this fits turbo look models (m491 option) and models with sport shocks (m474 option).
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $326.70
Make a selection
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846 r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: adapts GT3 seats to 996/997/Boxster for direct floor mount with 846 r9042.
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846 r9042 adapter is required for installation. 846 r908x series seat mount kits provide an inboard seat belt mount. 846 r9031 optional anti-sub strap mount fo...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
Race seat mounting option for 996/997/986/987
This product offers a simple installation process and adjustment flexibility.
This assembly mounts to the floor and places your seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see 846r907xseries brackets). This entire assembly, including race seat, can be easily installed and removed as a single unit for race events.
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09),...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 2005-08 BOXSTER 1997-04
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846 r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: adapts GT3 seats to 996/997/Boxster for direct floor mount with 846 r9042.
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846 r9042 adapter is required for installation. 846 r908x series seat mount kits provide an inboard seat belt mount. 846 r9031 optional anti-sub strap mount fo...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this only fits the wide body / turbo look 911 with the m491 wide body option.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $112.95
Make a selection
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846r9080 secures Porsche model recaro spg xl to floor on driver's side.
Installation: adapts GT3 seats to 944,964,965,993 for direct floor mount
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846r9042 adapter is required for installation. R-908x series seat mount kits provide an inboard seat belt mount. 846r9031 optional anti-sub strap mount for 846r908x series.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94 944 1982-85 944 1985-88
Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.
Fits: GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-0...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 1997-04
Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection
We are proud to offer a wide assortment of OEM Porsche parts. Nobody knows more about your car, then its creators themselves. You dont have to question the build quality, attention to detail, or reliability of these. Why trust anyone else?
this is a set of factory Porsche front steel rotors. Note: these sets are not compatible with the ceramic braking system or center locking wheels (optional on 2010+ turbo models).
View/Change Diagram
From $109.98
Make a selection
High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this only fits the wide body / turbo look 911 with the m491 wide body option. Please check the model fitment tab to ensure accurate fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $28.60
Make a selection
The bbi autosport Porsche 996 & 997 streetcup roll bar features a 2-piece design and 4130 chrome moly steel tubing (1.5" x .120" main hoop & 1.5" x 0.95" rear hoops) for excellent strength to weight ratio. Taking a sensible design approach, the 2-piece construction allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory bose subwoofers. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes "x" braces on both front and rear sections and each joint has been meticulously tig welded by hand. Bolt-in installation is accomplished by usin...(choose a part on the right to read more)
$2,395.00
Make a selection
High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this only fits the wide body / turbo look 911 with the m491 wide body option. Please check the model fitment tab to ensure accurate fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $16.12
Make a selection
We are committed to Porsche cars and are very happy to release an inner tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 058 05. We also suggest replacing your outer tie rods, we have a uniball option, our part # 96534703200sp or the OEM style, narrow body is part # 96434703200 or wide body is part # 96434703201 (qty. 2 are needed) and now is also...(choose a part on the right to read more)
No need for Porsche sport exhaust (pse) envy with this muffler! This offers weight savings and a far more exotic sound than the pse, all without drone. It is the perfect compromise for you and your loved ones. Rich, deep, turbo motorsport tones with the valves open and soft subtle, completely stock sounds with them closed. Top of the line or range depending on the english and is the best choice for a daily driver. Features: - + 16 crank hp & + 15 crank torque. - weighs 37 lbs. (17 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - direct bolt on replacement for the factory center muffler. - includes necessary installation hardware. - reduces turbo lag, backpressure and thermal lo...(choose a part on the right to read more)
$4,651.90
Make a selection
Product details:
Complete high-performance exhaust solution for the Porsche 993 turbo; fantastically daily drivable sound and power from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Includes:
993 turbo supercup exhaust system incl. Deluxe oval style tips
993 turbo sport cat x-pipe
993 turbo sport headers with heat
993 turbo cup high performance air box cover
993 turbo bmc f1 air filter
993 turbo ecu tuning upgrade
Features:
-fits all Porsche 993 turbo / turbo s vehicles (1995-1998)
-constructed from t304 stainless steel, c.n.c. Mandrel bent tubing for maxim...(choose a part on the right to read more)
General Fitment 911 1994-98
From $7,750.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|