G021256251A
These are the rings that fit inbetween the heat exchanger and the head and must be replaced every time the heat exchanger is removed. please make sure that the old rings are carefully removed by pinching them out rather than using a chisel that could damage the sealing surface. never stack the rings! one per cylinder! 1.7 rings have a slightly smaller interior diameter than the 2.0 variety. Four required.
Known as: sealing ring
T021256251A
Head To Exchanger Gasket 914 4 for Porsche 914
S021256251A
Elring Exhaust Seal Ring for Porsche 914
R021256251A
These are the rings that fit in between the heat exchanger and the head and must be replaced every time the heat exchanger is removed. please make sure that the old rings are carefully removed by pinching them out rather than using a chisel that could damage the sealing surface. never stack the rings! one per cylinder! 1.7 rings have a slightly smaller interior diameter than the 2.0 variety. Four required.
BAAA25600A
This kit consists of all the proper hardware to install heat exchangers and a muffler, including the rare copper locking nuts to ensure a perfect installation. Remember to install the exchangers one at a time and torque in an x pattern to 18 ft lbs.
Note: before ordering any 914 exhaust component, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up before connecting to the muffler. The flange gaskets are trapezoidal with a slight bend on the long side.
- 1973-74 2.0l models have heat exchangers that are straight before connecting to the muffler. The flange gaskets are trapezoidal that are straight on the long side.
- 1975-76 models have a triangular, 3-bolt flanges where they connect to the muffler.
Kit consists of:
2 - s025251261 - victor reinz muffler exhaust gasket 1.7, 1.8
4 - r021256251a - reinz copper washer
6 - rn0116701 - washer 8
8 - r039256297 - copper exhaust locking nut with built in washer 914 heat exchanger
6 - r311101463 - hex nut m8
6 - rn0102478 - bolt, hex hd m8x35
8 - rn0141395 - cheese head slotted sheet metal screw; 6x12, each; 914
4 - rn01021013 - hxhd screw 6x10
"Heat Exchanger/muffler Hardware Kit, 914 1970-74 1.7 1.8l"
Fitment: 914 1.7L 1970-73, 1.8L 1974
BAAA25600B
This kit consists of all the proper hardware to install heat exchangers and a muffler, including the rare copper locking nuts to ensure a perfect installation. Remember to install the exchangers one at a time and torque in an x pattern to 18 ft lbs.
Note: before ordering any 914 exhaust component, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up before connecting to the muffler. The flange gaskets are trapezoidal with a slight bend on the long side.
- 1973-74 2.0l models have heat exchangers that are straight before connecting to the muffler. The flange gaskets are trapezoidal that are straight on the long side.
- 1975-76 models have a triangular, 3-bolt flanges where they connect to the muffler.
Kit consists of:
2 - r039251261 - reinz exhaust muffler gasket 914 2.0
4 - r021256251a - reinz copper washer
6 - rn0116701 - washer 8
8 - r039256297 - copper exhaust locking nut with built in washer 914 heat exchanger
6 - b311101463 - copper exhaust nut - 8 mm self locking
6 - rn0102478 - bolt, hex hd m8x35
8 - rn0141395 - cheese head slotted sheet metal screw; 6x12, each; 914
4 - rn01021013 - hxhd screw 6x10
"Heat Exchanger/muffler Hardware Kit, 914 1973-74 2.0l"
Fitment: 914 1973-74 2.0L