Porsche 914 Body

YELLOW PLAID CLOTH - PER YARD - $143.50

Newly manufactured replacement plaid fabric for reupholstering your 914 seats or adding to your existing vinyl seats. This fabric perfectly reproduces the factory plaid fabric found in many mid-70\'s Porsche 914s. Sold by the yard.

Fitment





ORANGE PLAID CLOTH (YARD) - $149.50

Newly manufactured replacement plaid fabric for reupholstering your 914 seats or adding to your existing vinyl seats. This fabric perfectly reproduces the factory plaid fabric found in many mid-70\'s Porsche 914s. Sold by the yard.

Fitment





RED PLAID CLOTH - PER YARD - $149.50

Newly manufactured replacement plaid fabric for reupholstering your 914 seats or adding to your existing vinyl seats. This fabric perfectly reproduces the factory plaid fabric found in many mid-seventies Porsche 914s. Sold by the yard.

Fitment





ENGINE COMPARTMENT DECAL TIMING STICKER; 1973; 914; 1.7 - $11.00



Fitment





VALVE ADJUST DECAL STICKER; 914 1.7 AND 1.8 - $11.00



Fitment





ENGINE COMPARTMENT DECAL TIMING STICKER; 914; 1974; 1.8 - $11.00



Fitment





ENGINE COMPARTMENT DECAL TIMING STICKER; 914; 1975; 1.8 - $11.00



Fitment





ENGINE COMPARTMENT DECAL STICKER; 914; 1976; 2.0 - $11.00



Fitment





VALVE ADJUST DECAL STICKER 2.0; 914 - $11.00

Beautiful reproduction of the original valve adjustment sticker originally fitted to all 914 2. 0 models. Sticks on the front of the driver\'s cylinder cover.

Fitment





ENGINE COMPARTMENT DECAL TIMING STICKER 2.0; 914 1974 - $11.00

This sticker fits above the relay board in the engine compartment and details the emissions and timing specs. A must for any concours enthusiast.

Fitment





REPRODUCTION TOOL BAG BLACK PLASTIC WITH BAND 914 73-76 - $4.50

The final touch for your 914 restoration. This tool bag is an exact reproduction of the original late 1973-76 “cheap” black plastic tool bag. No concours entry is complete without this bag! Is also stock equipment for all late 73-79 vw beetle models

Fitment





91 ROZ OCTANE RATING STICKER - $5.95

Newly reproduced \"91 roz/ron\" octane rating sticker. Correct for 1975-76 914 models.


Fitment





7-PIECE TOOL KIT - 914 1970-72 - $95.00

Once again, you can have a factory original tool kit for your 914. This 7-piece kit features a flathead/phillips head reversible screwdriver, pliers, 10/13 mm wrench, wheel stud remover, hubcap remover, tow hook and a gray soft vinyl case.

Fitment





TOOL KIT 914 1973-76 - $55.95

Once again, you can have a factory original tool kit for your 914. Admittedly you don’t get many tools for the money, but what a great concours display item!

Fitment





INTERIOR DOOR HANDLE CUP - $7.95

Interior door latch cup insert for all 1970-early 73 914 models. Black plastic, fits left or right sides.


Fitment





FIRING ORDER DECAL STICKER, 914-6 - $11.00



Fitment





VALVE ADJUST STICKER DECAL, 914-6 - $11.00



Fitment





OIL LEVEL STICKER DECAL, 914-6 - $11.00



Fitment





ALTERNATOR SIGN - $11.00



Fitment





PEDAL BOARD BRACKET CLAMP - $9.50

Automobile atlanta is proud to announce the manufacture of 914/911 pedal board brackets. Long discontinued by the Porsche factory, this is the unique part that secures the wooden drivers pedal board on the left side. Its unique shape dictates a specially stamped piece. It fits 914 and the early 911 models.

Fitment





914-6 GT REAR DECK LID STRAP SET - $75.00



Fitment





914 911 GT DOOR HANDLE PULL STRAP SET - $32.95

Beautiful identical to the factory original door pull straps. These were installed on all of the factory 914-6 gt and 911 rsr models in place of the heavier door box armrest assemblies. Add the factory gt look to your 914. Sold as a pair

Fitment





DOOR PIN - $9.95

Known as: pin for door hinge / hinge bolt

Fitment





ENGINE LID RELEASE CABLE HANDLE T-HANDLE - $15.00

\"t\" shaped handle that screws onto the engine cover release cable on all 911, 912 and 914 models. Supercedes 914 552 813 20 a. The round knob originally fitted to 914 models.

Fitment





PORSCHE, INDIVIDUAL LETTER SET, GOLD,METAL - $99.50

\"Porsche\", individual letter set, gold for the engine grill lid. These are a nice metal reproduction of the originals.

Fitment





914 911 AUTO JACK STRAP - ONLY THE RUBBER - DOES NOT INCLUDE METAL ENDS - $32.00



Fitment





LEFT VISOR CLIP - $19.50

Perfect fit visor clips, just use your existing pins.

Fitment





RIGHT VISOR CLIP - $19.50

Perfect fit visor clips, just use your existing pins.

Fitment





SUN VISOR CLIP SET 914 VISOR; 15% OFF! - $49.73

Do you have a sunvisor that refuses to stay up? Are both visors sagging? We now offer a set of clips to hold those annoying sunvisors up. Included is the left, right and center mounts and is a sure-fire way to guarantee they stop flopping in your field of view at the most inopportune times.
kit consists of:

1 - b91473132710 - 914 center visor mount clip - normally $19. 50

1 - b91173132441 - right visor clip - normally $19. 50

1 - b91173132341 - left visor clip - normally $19. 50



Fitment





TIRE PRESSURE DECAL STICKER, 914-6 - $11.00



Fitment





165 TIRE PRESSURE STICKER 914 ON EXPANSION TANK - $12.95

Discontinued by Porsche, newly made by autoatlanta.
known as: sticker tyre 165 sr 15

Fitment





TIRE PRESSURE INFLATION STICKER 75 76 914 - $10.95

This newly reproduced sticker replaces your warn, scratched, or missing one on your 914. This sticker is correct for 75-76 914s.

Fitment





LOCK CYLINDER - $45.00

Ignition lock cylinder with keys

Fitment





DOOR SILL TRIANGLE 914 - $19.50

Sill triangle only. This triangle comes with the sill if you purchase that piece.

Fitment





INNER ROCKER PANEL; LEFT SIDE; 914 1970-76 - $127.00

When the inner rocker rusts, the 914 sags. Welding in a new one restores the strength to the frame and saves your 914.




Fitment





ROCKER CLAMSHELL ,SET OF TWO; 2% OFF! - $415.52

Easily restore the strength to your 914 chassis with our rocker clamshells. Designed to install over the rusted area, clamshells make chassis reinforcement easy or for you racers, the ultimate in chassis stiffening. Clamshells make such a perfect fit you can actually use them to realign your frame. Avoid costly restoration and save a 914!
kit consists of:

1 - b91450101314l - rocker clamshell, left - normally $212. 00

1 - b91450101314r - rocker clamshell, right - normally $212. 00



Fitment





ROCKER CLAMSHELL, LEFT - $212.00

Easily restore the strength to your 914 chassis with our rocker clamshells. Designed to install over the rusted area, clamshells make chassis reinforcement easy or for you racers, the ultimate in chassis stiffening. Clamshells make such a perfect fit you can actually use them to realign your frame. Avoid costly restoration and save a 914!

Fitment





ROCKER CLAMSHELL, RIGHT - $212.00

Easily restore the strength to your 914 chassis with our rocker clamshells. Designed to install over the rusted area, clamshells make chassis reinforcement easy or for you racers, the ultimate in chassis stiffening. Clamshells make such a perfect fit you can actually use them to realign your frame. Avoid costly restoration and save a 914!

Fitment





INNER ROCKER PANEL; RIGHT; 914 1970-76 - $127.00

When the inner rocker rusts, the 914 sags. Welding in a new one restores the strength to the frame and saves your 914. This part covers the area under the right sill panel and from just in front of the jack

Fitment





914 REAR TRUNK HINGE CUP PIVOT BRACKET - $24.20

Is your rear deck high on one front corner? You have broken the hinge pivot for lack of lubrication to the shoulder bolt! These are easily welded in once you relieve the spring pressure on the hinge roller! Ask also for the free installation instructions with purchase. Does not include the hinge bolt.

Fitment





RIGHT REAR SUSPENSION CONSOLE - $234.50

Beautiful piece, very complicated to duplicate. Stamped from our high quality steel tooling this piece replaces the inner passenger suspension mount that often breaks loose from battery acid damage. Easily welded in after engine and swing arm removal, order our rust conversion paint seam sealer and engine shelf for a perfect repair. You may want to also purchase our high quality engine shelf to complete the repair.

picture verified.

Fitment





FRONT SUSPENSION A-ARM MOUNT - $94.00



Fitment





BATTERY TRAY SUPPORT; 914 1970-76 - $49.50

914s have suffered from battery acid damage for years. They eventually all need a new tray and support. Easily welded in, when these parts are painted with polyurethane paint and you install one of our heavy duty battery covers and battery tray mats, the chances of this happening again are greatly reduced.
beware of cheap imitations without the weld-nut to hold the battery clamp. Ours is identical to the original no longer available factory version.

Fitment





EMERGENCY PARKING BRAKE PIVOT STAND - $65.00

Just pulled up on the 914 emergency brake handle and it broke off in your hand? The pivot stand has rusted away! Years of hardtop side seal leak directly onto this complex part has caused the problem. Discontinued by the factory in 2001 this identical part is an easy installation after simply sliding out the drivers seat and removing the seat rack and rocker carpet. This part can then be spot welded in.

Fitment





914 EMERGENCY BRAKE CABLE GUIDE TUNNEL COVER - $34.00

For years, we at the automobile atlanta 914 restoration shop when replacing the 914 floor pan, had to fabricate the small tunnel that held the emergency brake equalizer cable. Often overlooked and rusted out from years of a leaking hardtop seal, this brand new offering completely replaces the emergency brake equalizer cable tunnel and provides a nice resting place for the original rocker carpet. Easily welded in, no floorpan replacement is complete without it.

Fitment





REAR TRUNK FLOOR 914 - $179.50

Now a solution to the rusted rear trunk floor! Most 914 trunk floors by now have rusted from years of taillight leaks. Our repair panel is everything you need for a perfect factory repair without purchasing the $2100. 00 factory assembly! It is large enough that it extends in front of the brace.
beware of cheap imitations that do not cover the whole area. Ours includes the extra part on the floor underneath the reinforcement and is a superior piece for less money.

Fitment





914 DOOR SILL THRESHOLD PLATE, LEFT INCLUDES 2 TRIANGLES - $79.50

If you notice bubbling at the back of the threshold plate where it meets the rear quarter panel, the sill is rusted. If you remove the brushed aluminum or black plastic threshold, you will probably see additional damage. Our sill completely solves the problem and is easily welded in.


-triangles included



Fitment





914 DOOR SILL THRESHOLD PLATE; RIGHT INCLUDES TWO TRIANGLES - $79.50

If you notice bubbling at the back of the threshold plate where it meets the rear quarter panel, the sill is rusted. If you remove the brushed aluminum or black plastic threshold, you will probably see additional damage. Our sill completely solves the problem and is easily welded in.

triangles included


Fitment





914 FLOOR PAN CROSS MEMBER REPAIR; LEFT - $78.50





Fitment





FLOOR PAN CROSS MEMBER REPAIR; 914 RIGHT - $78.50

This is the piece that fits just under the front of the right seats and reinforces the floor board. This part often rusts from the bottom up. Discontinued by the factory in 2005 this exact reproduction is a perfect fit of compound curves and stampings. Sold per side.

Fitment





914 OUTER FIREWALL FULL PIECE - $202.00

If the outer firewall is rusted, we have the part to repair the area perfectly. Tested in our shop, this piece saves hours of costly fabrication and returns the area to the stock look without replacing the complete factory part.

Fitment





914 OUTER DRIVERS FIREWALL - $85.00

If the outer firewall is rusted, we have fabricated the part to repair the area perfectly. Tested in our restoration shop, this piece saves hours of costly fabrication and returns the area to the stock look without replacing the complete factory part.

Fitment





914 OUTER PASSENGER FIREWALL - $85.00

If the outer firewall is rusted, we have fabricated the part to repair the area perfectly. Tested in our restoration shop, this piece saves hours of costly fabrication and returns the area to the stock look without replacing the complete factory part.

Fitment





JACK POST AND SUPPORT COMBINATION; 914 - SAVE!! - $29.99

The jack post and support completes your frame restoration and restores use of the factory jack. They are easily welded in!

Fitment





914 JACK SUPPORT PLATE - $24.00

The jack post and support completes your frame restoration and restores use of the factory jack. They are easily welded in!

Fitment





914 JACK POST TUBE - $19.85

The jack post and support completes your frame restoration and restores use of the factory jack. They are easily welded in!

Fitment





LONGITUDINAL MEMBER INNER LEFT DRIVERS FRAME REPAIR FRONT LOWER PIECE - $505.00

Longitudinal for the left drivers side. Ever wonder why your 914 sags on the passenger side or the door sticks when opening? The frame is rusted and most probably from battery acid. Automobile atlanta\'s exclusive frame repair solves the problem and returns the strength to your 914! This part is now available in two pieces for ease of installation. The \"a\" piece replaces the part covered by the rocker panel and goes from under the speaker grille to the back firewall and includes the heater tube opening at the front and the lower seat belt bolt at the rear. Easily welded in it provides in addition a perfect mating surface for the floorpan. Part \"b\" replaces the frame rail under the battery and goes from the firewall to the front rear trunk wall. The engine mount and rear suspension console weld to this piece.

Fitment





LONGITUDINAL MEMBER INNER RIGHT FRAME REPAIR 2-PIECE KIT; SAVE $59.90 - $539.10

Longitudinal under the battery repair:  at last! A reasonably priced set of repair panels for the right frame rail!  ever wonder why your 914 sags on the passenger side or the door sticks when opening?  the frame is rusted! (and most probably from battery acid! ) automobile atlanta\'s exclusive two piece frame repair kit solves the problem and returns the strength to your 914!  the original part is over $2,350.
kit consists of:

1 - b91450143410a - 914 longitudinal inner right frame repair member upper - normally $299. 50

1 - b91450143410b - 914 longitudinal member inner right frame repair front lower piece - normally $299. 50



Fitment





914 LONGITUDINAL INNER RIGHT FRAME REPAIR MEMBER UPPER - $299.50

Longitudinal under the battery repair:  at last! Ever wonder why your 914 sags on the passenger side or the door sticks when opening?  the frame is rusted! (and most probably from battery acid! ) automobile atlanta\'s exclusive frame repair solves the problem and returns the strength to your 914!

Fitment





914 LONGITUDINAL MEMBER INNER RIGHT FRAME REPAIR FRONT LOWER PIECE - $299.50

Longitudinal under the battery repair:  at last! Ever wonder why your 914 sags on the passenger side or the door sticks when opening?  the frame is rusted! (and most probably from battery acid! ) automobile atlanta\'s exclusive frame repair solves the problem and returns the strength to your 914! This part is now available in two pieces for ease of installation. The \"a\" piece replaces the part covered by the rocker panel and goes from under the speaker grille to the back firewall and includes the heater tube opening at the front and the lower seat belt bolt at the rear. Easily welded in it provides in addition a perfect mating surface for the floorpan. Part \"b\" replaces the frame rail under the battery and goes from the firewall to the front rear trunk wall. The engine mount and rear suspension console weld to this piece.

Fitment





ENGINE SHELF; 914 1970-76 - $168.00

Want to replace your battery tray and support, but you see the shelf under it is rusted? You need our replacement shelf. We manufacture this great item, which also mounts the fuel pump and holds the engine to body seal. Easily welded in, it completes a perfect battery area repair. Order some new fuel pump mounts and fuel line grommets while you are at it, and coat with por 15 rust conversion paint before top coating. Ours is the latest and best fitting design

Fitment





ENGINE SHELF AND SUPPORT; 2-PIECE KIT 914 1970-76; SAVE $40.25 - $362.25

Want to replace your battery tray and support, but you see the shelf under it is rusted? You need our replacement shelf. We manufacture this great item, which also mounts the fuel pump and holds the engine to body seal. Easily welded in, it completes a perfect battery area repair. Order some new fuel pump mounts and fuel line grommets while you are at it, and coat with por 15 rust conversion paint before top coating.
kit consists of:

1 - b91450104411 - right rear suspension console - normally $234. 50

1 - b91450143612 - engine shelf; 914 1970-76 - normally $168. 00



Fitment





TOW EYE HOOK FRONT 914 - $47.00



Fitment





BATTERY TRAY; 914 1970-76 - $49.50

914s have suffered from battery acid damage for years. They eventually all need a new tray and support. Easily welded in, when these parts are painted with polyurethane paint and you install one of our heavy duty battery covers and battery tray mats, the chances of this happening again are greatly reduced.


Fitment





914 INNER FIREWALL LEFT, DRIVER SIDE - $104.50

Perfect patch for the lower inner firewall at the emergency brake cables and a good mounting surface for the floor pan installation, comes complete with the stamped holes for the emergency brake cables.

Fitment





INNER FIREWALL SET LEFT AND RIGHT; SAVE $20.90 - $188.10

Perfect patch for the lower inner firewall at the emergency brake cables and a good mounting surface for the floor pan installation, comes complete with the stamped holes for the emergency brake cables.
kit consists of:

1 - b91450164315 - 914 inner firewall left, driver side - normally $104. 50

1 - b91450164415 - 914 inner firewall right, passenger side - normally $104. 50



Fitment





914 INNER FIREWALL RIGHT, PASSENGER SIDE - $104.50

Battery acid or a leaking window rust the inner firewall everytime. No wonder your emergency brake doesn’t work!

Fitment





914 ENGINE BAY SEAL C CHANNEL PASS OR DRIVER - $29.50

S shaped channel to hold the engine bay seal on the passenger or drivers side easily spot welded into place. Is included with the engine shelf replacement. Make sure that you order a new engine bay seal for this part while you are at it!

Fitment





GT FRONT VALANCE FOR FLARED (GT) FENDERS; 914 1970-76 - $199.00

914 front gt valance just like the factory original! Perfect match to our gt steel flares and gt rocker panels, this high quality fiberglass molded piece is perfect for the guy wanting to achieve the original gt look of the famous 914-6 racing cars. Easily painted and bolted on, allows a big opening for the gt front mounted oil cooler.

Fitment





GT FRONT VALANCE FOR STOCK FENDERS NOTCHED FOR OIL COOLER - $165.00

914 front gt valance, just like the factory original! This high quality fiberglass molded piece is perfect for the guy wanting to achieve the original gt look of the famous 914-6 racing cars. Easily painted and bolted on, allows a big opening for the gt front mounted oil cooler. For stock fendered- 914s.

Fitment





916 DOUBLE GT GRILLED ENGINE LID - $489.96

This lid gives you twice the cooling. We duplicated an exact 916 engine lid with the double grille just for you! Twice the air flow and a must for track cars. Just paint to match or leave black like the original! Part sold rough.


Fitment





GT REAR ENGINE LID - $660.00

This lid gives you twice the cooling. We keep the original grill material in place from the factory since it is molded to the lid and then add a piece to the upper section of the lid. The upper grill is attached using pop rivets. Twice the air flow and a must for track cars. Just paint to match or leave black! Part sold rough.


Fitment





SEAT HINGE BRACKET REPAIR KIT 914 - $69.18

Is your seat loose due to rusted seat brackets? Nearly identical to the ones originally welded to the factory floor pan, they make a perfect repair. One kit needed per seat.
kit consists of:

2 - rsic50194200 - 914 floor pan seat hinge mount

2 - rsic50194100 - 914 seat bracket floor pan hinge



Fitment





FLOOR PAN QUARTER SECTION, LEFT REAR; 914 - $107.80

By dividing the area into quarter sections, you can repair as much or as little area as you desire. Smaller quarter areas also ease the installation process.

Fitment





PEDAL CLUSTER REINFORCEMENT; 914 - $35.50

This is the small channel shaped piece you see from underneath the car that reinforces the pedal cluster. It also includes the two studs to mount it and has the cage nuts to screw in the accelerator pedal. Critical piece in any 914 floor pan restoration. Please note that this piece is included in our left floor pan half but not the front floor pan.

Fitment





FLOOR PAN QUARTER SECTION, RIGHT REAR; 914 - $107.80

By dividing the area into quarter sections, you can repair as much or as little area as you desire. Smaller quarter areas also ease the installation process.

Fitment





914 FRONT TRUNK FLOOR PAN - $350.00



Fitment





REAR FLOORPAN PATCH - $101.00

For the southern rust free car with a leaking battery or leaking rear window, this exact duplicate of the factory original. It covers the area from the rear firewall to in front of the seat hinges and it is easily installed. Make sure you install the floor pan tar kit as well and use the seam sealer and chip guard for a complete repair.

Fitment





FLOOR PAN HINGE REINFORCEMENT (SOLD EACH) - $11.13

This u channel reinforces the outer hinges and is easily welded to the bottom of your freshly installed floorpan, the were never available separately from the factory.

Fitment





LOWER AND UPPER 914 INNER WHEEL HOUSE (ONE PIECE); RIGHT; 914 1970-76 - $225.00

At last, a solution to right frame rail rust. The inner rocker solves the problem from the jack post to the front, but what about under the jack post to the rear? The solution is our right inner wheel house repair panel. It solves both right rear frame rot as well as the behind the battery tray rust-through. Easily welded in, it restores these areas\' strength, as well as the stock appearance. One piece does it all! Piece is made extra strong and coated for good rust protection.

Fitment





ENGINE LID HINGE BRACKET - $28.50

Does your engine lid hit the rear deck even after adjustment? The engine lid hinge bracket is broken! Never offered as a separate piece from the factory, it is now available! Easily spot welded on to the backwall. It makes a perfect repair. Sold each.

Fitment





REAR VALANCE WITHOUT NOTCH FOR GT FLARES 914 - $159.50

Something the factory never produced so we did. Nicely finishes any flared 914. Comes without notch for stock or custom applications.


Fitment





914 FRONT BUMPER TOP SEAL PAD - $299.00

Extremely disappointed that the factory discontinued this high appearance direly needed item, we took it upon ourselves via our fellow 914 owner and german engineer juergen to manufacture and identical but superior product. Made from the latest waterproof materials and reinforced with stainless steel instead of the the stock metal the factory used, this seal will last threefold as long as the factory original while fooling the best of the concours judges. Please but a set of front and rear and save! Also see our perfect fit front and rear bumper guards for you 73 74 owners!

we also sell the front and rear impact strips as a set for a special price; part number b91450302310s.

Fitment





914 FRONT AND REAR BUMPER TOP SEAL PAD SET; SAVE $17.94 - $580.06

Just in from being reproduced, we finally have the front and rear bumper top seals available to all who need them. These have been discontinued for some time, and 40 year old rubber being what it is, they could all surely stand to be replaced. Get a set now and save!

kit consists of:

1 - b91450302310 - 914 front bumper top seal pad - normally $299. 00

1 - b91450302710 - 914 rear bumper top seal pad - normally $299. 00



Fitment





914 REAR BUMPER TOP SEAL PAD - $299.00

Totally discontinued by the Porsche factory, we took it upon ourselves to produce this exact duplicate of the original but with modern waterproof materials and stainless steel insert. This part will outlast the factory original threefold yet is so identical in appearance it would fool the strictest concours judges along with dr. 914! Buy a set of front and rear and save!

we also sell the front and rear impact strips as a set for a special price; part number b91450302310s.

Fitment





914 LEFT FRONT FENDER TO COWL REPAIR PANEL - $49.50

This is the piece for the repair of the rear of the 914 front fender where it attaches to the cowl. We also have the cowl repair panel available

Fitment





914 RIGHT FRONT FENDER TO COWL REPAIR PANEL - $49.50

This is the rear part of the right front fender where the fender attaches to the cowl. Great for repairing the rust in this area and joins our cowl repair panel. No more fabrication!


Fitment





LEFT COWL REPAIR PANEL 914 - $125.00

Superb way to repair the rusted cowl to fender area, designed from new old stock parts for perfect factory fit

Fitment





914 RIGHT COWL REPAIR PANEL - $125.00

Superb way to repair the cowl area next to the fender. Designed from original nos factory stampings, this is a perfect fit

Fitment





914 ROCKER PANEL INSTALLATION KIT - 2 REQUIRED - $32.34

All hardware to install your rocker panel. Two kits required per car. This kit is personally assembled by our staff with all of the correct factory parts including the rare plastic rivets. Rivets are opaque and can be touched up black with a magic marker.

kit consists of:

6 - g99959155040 - rocker panel rivet 914

2 - b91455912710 - spacer rocker panel valance spoiler 914

3 - rn0141395 - cheese head slotted sheet metal screw; 6x12, each; 914

2 - g90018701702 - screw 4. 2x19

2 - r99950722900 - speed nut - 4. 2

2 - r90002500203 - washer - 5 mm



Fitment





914 STEEL OUTER ROCKER PANEL , LEFT - $149.50

Finally an excellent reproduction of the outer steel factory rocker panel. Identical to the original at a fraction of the new price. Requires some finish work.

Fitment





OUTER STEEL ROCKER PANELS; RIGHT AND LEFT SET OF TWO; 914 1970-76 - $299.50

Finally an excellent reproduction of the outer steel factory rocker panel. Identical to the original at a fraction of the new price. Now get both side for one low price!

Fitment





OUTER ROCKER PANEL RIGHT STEEL; 914 1970-76 - $149.50

Finally an excellent reproduction of the outer steel factory rocker panel. Identical to the original at a fraction of the new price.

Fitment





OUT OF STOCK - DOOR JAMB REPAIR PANEL, LEFT DRIVER SIDE 914 - $129.50

The door jamb repair completes the rusted quarter/sill panel repair. You will need this piece if you notice bubbling or rust-through near the door catch. This piece is more difficult to weld in, but makes a perfect undetectable repair. Remember to save the dot sticker in the left door jamb



Fitment





DOOR JAMB REPAIR PANEL, SET; SAVE $12.95 - $246.05

The door jamb repair completes the rusted quarter/sill panel repair. You will need this piece if you notice bubbling or rust-through near the door catch. This piece is more difficult to weld in, but makes a perfect undetectable repair. Remember to save the dot sticker in the left door jamb.

kit consists of:

1 - b91450390310dj - out of stock - door jamb repair panel, left driver side 914 - normally $129. 50

1 - b91450390410dj - out of stock - door jamb repair panel, right passenger side 914 - normally $129. 50



Fitment





914 DOOR CATCH REINFORCEMENT - $27.50

Some early model 914s did not even have this necessary piece what a safety concern! Replace or install one of these factory duplicates easily when replacing the door jamb. Also reinforces the chassis and reduces body flex and door rattling

Fitment





OUT OF STOCK - DOOR JAMB REPAIR PANEL, RIGHT PASSENGER SIDE 914 - $129.50

The door jamb repair completes the rusted quarter/sill panel repair. You will need this piece if you notice bubbling or rust-through near the door catch. This piece is more difficult to weld in, but makes a perfect undetectable repair.




Fitment





REPRODUCTION 914 GT STEEL FENDER FLARES, SET OF FOUR - $975.00

Our steel gt flares are exact duplicates of the real thing and give your car gt identity, as well as enabling 7 inch and 8 inch wheels to be installed! Easily installed by a competent body shop, you will love the look and the handling! We tried hard to exactly duplicate the factory flare and improve on it! We used the latest optical scanning technology (the same that scanned the new gt 40 for ford ) and found that the left and right original (we used an old factory original set loaned from our friends at brumos) are not mirror images of one another! By combining the two programs, we were able to achieve exact mirror images for a perfect fit. You will love how easy they install. Great part at a great price!

Fitment





REAR SAIL ROLL BAR PANEL, LEFT 914 - $137.50

Bubbling under the side vinyl is caused by body rot. Originally the only way to solve this was to replace the quarter panel! To make the job simple we made a patch panel. It is large enough to solve any rust problem in the area and welds in easily!

Fitment





REAR SAIL PANEL, SET; SAVE $19.25 - $255.75

Bubbling under the side vinyl is caused by body rot. Originally the only way to solve this was to replace the quarter panel! To make the job simple we made a patch panel. It is large enough to solve any rust problem in the area and welds in easily!
kit consists of:

1 - b91450394310 - rear sail roll bar panel, left 914 - normally $137. 50

1 - b91450394410 - rear sail panel, right - normally $137. 50



Fitment





REAR SAIL PANEL, RIGHT - $137.50

Bubbling under the side vinyl is caused by body rot. Originally the only way to solve this was to replace the quarter panel! To make the job simple we made a patch panel. It is large enough to solve any rust problem in the area and welds in easily!

Fitment





GT GRILL MATERIAL; 914 1970-76 - $55.00

We receive hundreds of calls a year for the original gt 916 engine grille, so we found the original german chicken wire to do it yourself! The is exact grill material for your gt look.

Fitment





914 ENGINE GRILLE TO LID WELTING - $9.50

Beautiful reproduction! Perfect replacement for the long discontinued factory part, this fits in between the engine lid grill and the painted part of the engine lid acting as a buffer. Easily installed, we include enough for all grilles as well.

Fitment





GRILL TO BODY SEAL, RIGHT - $4.84



Fitment





914 REAR ENGINE BAY SHROUD SEAL - $35.00

Our own excellent reproduction of this no longer available part is a must for proper engine cooling. Install easily with a little silicone grease, fits the rear of the engine bay only.

Fitment





914 ENGINE BAY SEAL SET SHROUD; 10% OFF! - $76.46

Left, right, front, and rear engine bay seals. Cannot get much better and the price is certainly right!
kit consists of:

1 - b91450411710 - 914 rear engine bay shroud seal - normally $35. 00

2 - b91450415510 - 914 engine bay shroud seal - left or right - normally $31. 00

1 - b91450415510f - engine bay shroud seal - front - normally $18. 95



Fitment





914 ENGINE BAY SHROUD SEAL - LEFT OR RIGHT - $15.50

A must have part for engine cooling. Replace this part when the engine is out and clean the bay at the same time! Order three of these for the front and the drivers and passengers side and then our special rear one to complete the job. Check all engine sheetmetal boots and seals while you are at it for the best cooling.

Fitment





ENGINE BAY SHROUD SEAL - FRONT - $18.95



Fitment





BUMPER GUARD LEFT FRONT 914 - $95.00

Are you tires of your sunburned worn, cracked, damaged, or missing bumper guard? As we all know the factory has long discontinued these but we now offer these newly manufactured replacements made from the highest quality automotive waterproof materials with stainless steel inserts. These are identical to the original factory parts in appearance but should last the life of your 914 due to the superior materials save money by ordering a set. Please see our rear guards as well

Fitment





BUMPER GUARD RIGHT FRONT 914 - $95.00

Are you tires of your sunburned worn, cracked, damaged, or missing bumper guard? As we all know the factory has long discontinued these but we now offer these newly manufactured replacements made from the highest quality automotive waterproof materials with stainless steel inserts. These are identical to the original factory parts in appearance but should last the life of your 914 due to the superior materials save money by ordering a set. Please see our rear guards as well

Fitment





REAR BUMPER, CHROME; 914 1970-73 - $995.00

Beautiful rear factory chrome bumper for all 1970-73 914s without rear bumper guards. The factory original part is perfect the used part is acceptable but will have flaws and need to be rechromed to be perfect. The rebuilt part has been straightened and doubly rechromed for a high gloss finish. Please remember that the used and rebuilt parts both require a core charge.

Fitment





REAR FLOOR PAN JACKING TRIANGLE, LEFT, 914 1970-76 - $66.00

The factory forgot about this one! Never in the parts book or with the floor pan replacement part, this is where the jackstand should be placed! Direly needed for any restoration. Part includes the jacking donut, part number b914 507 041 aa.



Fitment





JACKING DONUT - $33.50

Sold each. There are four of them on the 914 floor pan. They provide great support for jacking and/or jackstands. Easily spot welded in.

Fitment





RIGHT REAR FLOOR PAN JACKING TRIANGLE , 914 1970-76 - $66.00

This piece includes the jacking donut.


Fitment





914 FRONT TRUNK CARPET KIT, TWO PIECE - $39.50

Our trunk re-carpeting kit is made of the original charcoal needle felt carpet and is an excellent alternative to the expensive non-molded factory part.


Fitment





EXTRA STRENGTH 914 NYLON REAR TRUNK LOCK CAM - $13.20

If your 914 rear trunk acts locked no matter which way you trun the key, the trunk lock cam is broken! We manufacture this part and guarantee it for life! Easily installed. Make sure you have it installed at the proper angle and make sure it is contacting the latch before you close the trunk lid!

Fitment





914 HOOD RELEASE CABLE SHEATH TUBE - $24.00



Fitment





FRONT TRUNK HOOD SEAL 914 - $74.50

Inexpensive reproduction of the original 914 hood seal with glued ends. Manufactured specifically for the 914, this piece is an decent fit for any 1970 to 1976 914 or 914-6. Please see the s part for a perfect reproduction

Fitment





FRONT TRUNK SEAL SET; 5% OFF! - $88.78

Two great reproduction seals to thoroughly seal the front trunk area once and for all. Set consists of the multiple turn front trunk cavity perimeter seal along with the gas tank bulkhead seal. Easily installed with a bit of weather strip adhesive and the bulkhead seal tapped on with the heal of your hand!
kit consists of:

1 - b91451190110 - front trunk hood seal 914 - normally $74. 50

1 - b91451190210 - front bulkhead seal; 914 1970-76 - normally $18. 95



Fitment





FRONT BULKHEAD SEAL; 914 1970-76 - $18.95

This rubber seal well protected over the years mounts on the top edge of the wall in front of the gas tank and seals the front trunk area from the gas tank area. Easlily installed, clamps on via the spring metal embedded into the seal.

Fitment





ENGINE LID DRIP PAN TRAY HARDWARE KIT; 914 - $21.40

Impossible to find anywhere, we were finally able to put a nice kit together to mount the new style drip pan to your 914 lid.

kit consists of:

2 - r90014600202 - 6x20 screw

2 - b91455912710 - spacer rocker panel valance spoiler 914

3 - rn0116521 - washer 6mm

3 - rn10000402 - tapping screw 4. 8x16

3 - rn0116923 - washer 5mm

3 - r99900044105 - m5 lock washer



Fitment





UPPER REAR TRUNK LATCH 914 - $145.00

Exact duplicate of the original factory part

Fitment





TRUNK LATCH SPRING PERCH INSERT 914 - $8.50

Insert for part 91451204110 trunk latch saves having to purchase an expensive rear trunk latch when just the spring perch breaks. Lifetime guarantee.

Fitment





ENGINE LID RELEASE CABLE STAND - $15.00



Fitment





TRUNK HINGE BOLT 914 - $9.90

This is the shoulder bolt on which the trunk hinge pivots. Four required per car make sure you periodically lubricate these bolts to keep the brackets from breaking.

Fitment





RUBBER STOP FOR ENGINE LID - $14.60



Fitment





REAR TRUNK HINGE STRAP - $24.50

Excellent reproduction of the original discontinued factory part, limits trunk hinge travel as not to damage the side engine grille

Fitment





REAR TRUNK SEAL, FRONT; 914 1970-76 - $17.50

This part is the shorter seal on the front leading edge of the rear trunk at the engine compartment.

Fitment





REAR TRUNK SEAL 914 - $35.95

This is the large u-shaped rear trunk seal that fits around the rear three sides of the rear trunk and seals it from the elements. Make sure you check the tail light bodies to rear panel mounting for water leaks before suspecting the rear trunk seal to leak. Also check the alignment of the trunk hinges and their pivot cups.

Fitment





914 REAR TRUNK SEAL SET; 5% OFF! - $50.78

Two great reproduction seals made by the leading manufacturer of trunk edge seals! Precise fit and almost identical to the factory originals, this set of the main u shaped trunk perimeter and front to the engine lid seal are easily installed with a slight bump from the heel of your hand.
kit consists of:

1 - b91451231710 - rear trunk seal 914 - normally $35. 95

1 - b91451231510 - rear trunk seal, front; 914 1970-76 - normally $17. 50



Fitment





REAR LID TO GLASS SEAL - $16.00

This is the seal that fits against the back of the rear window and buffers the engine lid keeping water out of the compartment. The original part has a steel spring embedded in it for attachment to the ledge and the repro glues on with some weatherstrip adhesive.

Fitment





914 SEAT CUSHION RECOVERING KIT 72-74 BLACK - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white.

Fitment





SEAT BOLSTER RECOVERING KIT 914 1972-76 LEFT OR RIGHT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





SEAT BACKREST RECOVERING KIT 914 1975-76 LEFT OR RIGHT BASKETWEAVE - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





SEAT ADJUSTER LOOP 914 SEAT HANDLE PLASTIC - $14.00

Why install a barbaric imitation that all of the concours judges will laugh about when you can install one of our guaranteed for life precise looking plastic ones? Easily installed with two rivets, we will even include the installation instructions!

Fitment





SEAT CUSHION RECOVERING KIT 914 1970 LEFT BLACK - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, or tan

Fitment





SEAT CUSHION RECOVERING KIT, 914 1971 LEFT BLACK - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white. This part is made from the original smooth vinyl installed only on the 1971 factory produced 914.

Fitment





SEAT CUSHION RECOVERING KIT 914 1975-76 BLACK - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white.

Fitment





BLACK CENTER CUSHION 1970 914 914-6 - $63.45

Fits the center tray perfectly and exactly matches the black interior vinyl. This is a superior part nicely padded and felt covered underneath and molded for a precise fit.

Fitment





CENTER SEAT CUSHION, REPRODUCTION; 914 1972-1974 - $63.45

Whether brand new or our fabulous reproduction the center seat cushion seats three and nicely fills the plastic tray with its conforming underbelly. Not for the top of the optional console box. Order our third seat seatbelt set and truly seat three.

Fitment





SEAT BACKREST RECOVERING KIT 914 1972-74 LEFT OR RIGHT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





SEAT CUSHION RECOVERING KIT 914 1970 RIGHT BLACK - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white.

Fitment





SEAT CUSHION RECOVERING KIT, 914 1971 RIGHT BLACK - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white.

Fitment





914 SEAT TILT KNOB - $12.50



Fitment





REPLICA GT BUCKET SPORT SEAT - $1,395.00

Perfect duplicate of the original gt sport seat fitted to the racing 914-6 models. Accomplish historical accuracy and concours look with these great seats.

Fitment





SEAT CUSHION RECOVERING KIT 914 1972-74 BLACK - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white.

Fitment





SEAT CUSHION RECOVERING KIT 914 1975-76 BLACK - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white.

Fitment





CONSOLE BOX TOP RECOVERING KIT CENTER CUSHION 914 COVER - $43.45

Recovering kit for deposit box top recover your factory 1973-76 console box top with our handy recovering kit. Easily installed by the amateur, our cushion cover has the original map pocket. Kit is available in black only

Fitment





6 PIECE TARGA TOP SEAL KIT; 914; SAVE $38.30 - $344.70

The 6 critical seals to keep the water out in one handy kit. When it rains, it pours, and we all know how leaky the 40 year old rubber on your 914 can get. Replace the ones that matter most; the windshield frame seal, the vertical rollbar seals, and the targa side seals.

kit consists of:

1 - b91456303910 - Porsche 914 windshield top seal - normally $169. 50

1 - b91453118510 - left targa top side seal - normally $38. 50

1 - b91453118610 - right targa top side seal - normally $38. 50

1 - b91453114310 - 914 left rollbar seal
- normally $38. 50

1 - b91453114410 - right rollbar side seal - normally $38. 50

1 - b91456307711 - targa top rear seal 914 - normally $59. 50



Fitment





LEFT LOWER DOOR SKIN PANEL 914 - $175.00

Nice part! If the lower portion of your 914 door is rusted or damaged this is the solution. Easily welded in, this is a perfect fit replacement for the lower portion of the door skin

Fitment





914 REBUILT DOOR STRAP UNIT - $98.94

This part always wears and either does not hold the door open and/or finally breaks allowing the door to open too far and bend! Don’t take a chance, replace yours now!

Fitment





914 DOOR STRAP REPAIR BAR - $16.50

Even though the factory used to sell the whole unit, it was usually just the strap itself that broke. This exact laser cut aluminum replacement is an easy and inexpensive fix for this no longer available part. We also offer the spring and roller kit.

Fitment





914 LEFT ROLLBAR SEAL - $38.50

Exact reproduction of the original factory part this seal fits on the front of the factory rollbar and the rear of the window glass closes against it. A must for sealing out rain and wind

Fitment





VERTICAL ROLLBAR SEAL SET; 5% OFF! - $73.15

Why cut and chop some seal off of a roll when you can simply install an identical seal to the original factory molded version? Our beautiful molded end seals are a precise slide in fit and reseal the back of the side window to the targa bar! Why compromise paying more for junk?
kit consists of:

1 - b91453114310 - 914 left rollbar seal
- normally $38. 50

1 - b91453114410 - right rollbar side seal - normally $38. 50



Fitment





RIGHT ROLLBAR SIDE SEAL - $38.50

Exact reproduction of the original expensive factory seal. This is the seal on the front of the roll bar that seals the rear vertical surface of the side glass. Easily installed and cut slightly longer to compensate for body sag on some vehicles.

Fitment





LEFT TARGA TOP SIDE SEAL - $38.50

This is an exact reproduction of the original factory seal that fits on the drivers side of the hardtop and the one that the side glass rolls up and hits. Easily replaced with a wide blade screw driver and some silicone grease just fit the inner side into the channel and then pinch the outside in with a screwdriver. Remember not to cut it short as it will shrink to fit! Direly needed to seal the wind and water out of your 914

Fitment





TARGA TOP SIDE SEAL SET; 5% OFF! - $73.15

Why cut and chop some seal off of a roll when you can simply install an identical seal to the original factory molded version and save money at the same time? Our beautiful molded end seals are a precise slide in fit and reseal the top of the side window to the targa top!
kit consists of:

1 - b91453118510 - left targa top side seal - normally $38. 50

1 - b91453118610 - right targa top side seal - normally $38. 50



Fitment





RIGHT TARGA TOP SIDE SEAL - $38.50

An exact copy of the original factory seal, this is the seal that fits on the passengers side of the hardtop and the one that the side glass rolls up and hits. Easily replaced with a wide blade screw driver and some silicone grease just fit the inner side into the channel and then pinch the outside in with a screwdriver. Remember not to cut it short as it will shrink to fit! We have a tube of silicone grease available to help with the installation.

Fitment





6X12 SCREW DOOR CATCH OR EXTERIOR MIRROR - $1.32

This is the domed polished screw that secures the outside mirror and is also used to secure the door catch in the jamb. It is also used to attach the exterior side mirrors to the car. This screw shows so it is necessary to have the polished domed variety.

Fitment





914 LEFT OUTER DOOR SEAL (ON DOOR) - $44.00

Excellent in reproduction or the original for you concours buffs, this is the seal that fits on the perimeter of the door and cups around the seal on the door frame

Fitment





914 OUTER DOOR SEAL SET; 5% OFF! - $83.60

By far the best ones available in the market. Molded ends powdered, cannot be told from the expensive factory originals. Beware of the cheap repros cut from a roll, and install the best. Your 914 deserves it.
kit consists of:

1 - b91453181310 - 914 left outer door seal (on door) - normally $44. 00

1 - b91453181410 - 914 right outer door seal (on door) - normally $44. 00



Fitment





914 RIGHT OUTER DOOR SEAL (ON DOOR) - $44.00

Excellent in reproduction or the original for you concours buffs, this is the seal that fits on the perimeter of the door and cups around the seal on the door frame.

Fitment





914 LEFT INNER DOOR SEAL (ON BODY) - $35.00

The \"b\" part is an excellent reproduction of the original seal. The r and g are originals. This is the seal that fits on the unibody between the rocker carpet and the threshold, this assures a good door seal and no rattles! Slightly smaller than the original it is easily installed with a plastic hammer (or a strong heel of the hand! ) order the corresponding seal on the door for the tightest fit.

Fitment





INNER DOOR SEAL SET; 5% OFF! - $66.50

This quality set of precision cut door seals are made by the leading manufacturer of door to body frame seals in the country. Impregnated with steel, this install just like the factory originals for a precise fit.
kit consists of:

1 - b91453182110 - 914 left inner door seal (on body) - normally $35. 00

1 - b91453182210 - 914 right inner door seal (on body) - normally $35. 00



Fitment





914 RIGHT INNER DOOR SEAL (ON BODY) - $35.00

The \"b\" part is an excellent reproduction of the original seal. The r and g are originals. This is the seal that fits on the unibody between the rocker carpet and the threshold, this assures a good door seal and no rattles! Slightly smaller than the original, it is easily installed with a plastic hammer (or a strong heal of the hand! ) order the corresponding seal on the door for the tightest fit.

Fitment





LEFT DOOR WINDOW SQUEEGEE 914 - $6.50

This nifty item squeezes the water from the side of the window glass and also prevents water from entering the door cavity. Easily inch-wormed into the gutter using silicone grease; order a rear window cap to finish the job.

Fitment





OUTER DOOR WINDOW SQUEEGEE SET; 5% OFF! - $12.35

These rubber seals squeeze the water from the window as the glass is rolled down. By far the best in the market. Top quality u. S . Made rubber, this set simply slides in with a bit of silicone grease.
kit consists of:

1 - b91453187310 - left door window squeegee 914 - normally $6. 50

1 - b91453187410 - right door window squeegee 914 - normally $6. 50



Fitment





RIGHT DOOR WINDOW SQUEEGEE 914 - $6.50

This nifty item squeezes the water from the side of the window glass and also prevents water from entering the door cavity. Easily inch-wormed into the gutter using silicone grease; order a rear window cap to finish the job.

Fitment





LEFT REPRODUCTION 914 DOOR BASE AND HANDLE W/O LOCK - $114.00

Includes every thing you need to effectively repair your outer door latch. Includes a new door latch base a door latch cam a door latch flap and the door latch repair rivet. All three pieces are guaranteed for life, just do not over tighten the door latch base stud! (we do not guarantee stud breakage! )

Fitment





CHROME DOOR LATCH BASE; 914 1970-76 - $45.00

We became very tired of the expensive factory door latch assembly so we had the individual parts made. Now you can replace just what’s broken and not suffer from sticker shock. This particular piece, the door latch base with the lock cylinder hole, is also reinforced where the original one always broke. Heavily chromed it is guaranteed for life. Just make sure that you do not over tighten the stud! Comes complete with the replacement rivet.

Fitment





NYLON DOOR LATCH CAM 914 - $9.50

We became very tired of the expensive factory door latch assembly so we had the individual parts made. Now you can replace just what\'s broken and not suffer from sticker shock. This door latch cam manufactured from nylon 11 is far superior to the non-available factory piece and is guaranteed for life. If your door acts like it is locked from the outside this piece has broken. Easily replaced after door latch removal.

Fitment





RIGHT REPRODUCTION 914 DOOR BASE AND HANDLE W/O LOCK - $114.00

Package deal! Kit contains everything you need for a perfect door latch repair and a lifetime guarantee. Heavily chromed and reinforced door latch base and a door latch flap, along with the nylon door latch cam make repair of the door latch child\'s play!

Fitment





WINDOW SEAL RAIL - $75.00

Excellent reproduction of the original factory piece. Works for both driver and passenger side.


Fitment





BRUSH STRIP 914 OUTER FUZZY STRIP - $21.50



Fitment





SEALING RAIL LEFT DRIVERS 73-76 914 - $69.50



Fitment





LEFT SIDE WINDOW REAR CAP, 1970-72 914 - $35.75

This high quality plastic cap nicely finishes off the squeege at the back of the side window while providing the final groove for the squeege to fit into. Easily installed with one screw, it also helps keep the window from rattling. This part also fits about the first 1000 1973 914 models. Why not order squeeges while you are at it?

Fitment





LEFT AND RIGHT SIDE WINDOW REAR CAP SET, 1970-72; 12% OFF! - $62.92

This is a set of high quality plastic cap that nicely finishes off the squeege at the back of the side window while providing the final groove for the squeege to fit into. Easily installed with one screw, they also helps keep the window from rattling. This part also fits about the first 1000 1973 914 models. Sold as a set of 2, for left and right sides.
kit consists of:

1 - b91454211110 - left side window rear cap, 1970-72 914 - normally $35. 75

1 - b91454211210 - right side window rear cap, 1970-72 914 - normally $35. 75



Fitment





RIGHT SIDE WINDOW REAR CAP, 1970-72 914 - $35.75

This high quality plastic cap nicely finishes off the squeegee at the back of the side window while providing the final groove for the squeegee to fit into. Easily installed with one screw, it also helps keep the window from rattling.
this part also fits about the first 1000 1973 914 models. Why not order squeegees while you are at it?

Fitment





LEFT SIDE WINDOW REAR CAP 1973-76 914 - $15.00

This excellent reproduction replaces the no longer available factory part and is the plastic cap that fits at the rear top of the door and finishes off the squeege. Easily installed with two screws one of which holds the rear window guide channel.

Fitment





LEFT AND RIGHT SIDE WINDOW REAR CAP SET 1973-76; 15% OFF! - $25.50

This excellent set of reproduction replaces the no longer available factory parts and is the plastic cap that fits at the rear top of the door and finishes off the squeegee. Each easily installs with two screws, one of which holds the rear window guide channel. Set of left and right caps.
kit consists of:

1 - b91454217310 - left side window rear cap 1973-76 914 - normally $15. 00

1 - b91454217410 - right side window rear cap, 1973-76 914 - normally $15. 00



Fitment





RIGHT SIDE WINDOW REAR CAP, 1973-76 914 - $15.00

This plastic part caps off the rear of the window at the back of the squeege and fills in that void where you wondered \"what goes there? \" easily installed with two screws, the inner one also secures the rear side window track.

Fitment





REPRODUCTION 914 VENT GLASS SEAL LEFT - $58.49

Often overlooked in the restoration process, this seal is very easily replaced after removing the vent window cap and the vent window. It must be removed anyway when refinishing to avoid messy over spray.

Fitment





REPRODUCTION 914 VENT GLASS SEAL RIGHT - $58.49

Often overlooked in the restoration process, this seal is very easily replaced after removing the vent window cap and the vent window. It must be removed anyway when refinishing to avoid messy over spray.

Fitment





FOOT REST 914 SUPPORT STRAP - $19.50

Foot rest support strap to attach footrest under speaker screw

Fitment





FRONT TRUNK CARPET TIRE BOARD 914 - $90.00

Fully carpeted, this panel often comes up mia when doing a full restoration. Please specify 70-74 or 75 76

Fitment





REAR TRUNK CARPET, 914 1970-71 - $75.00

Our trunk re-carpeting kit is made of the original charcoal needle felt carpet and is an excellent alternative to the expensive non-molded factory part. Includes tough foam padding!

Fitment





REAR TRUNK CARPET; 914 1972-76 - $75.00

Our trunk re-carpeting kit is made of the original charcoal needle felt carpet and is an excellent alternative to the expensive non-molded factory part. Includes a tough foam backing

Fitment





REAR TRUNK CARPET, 914 1975-76 - $75.00

Our trunk re-carpeting kit is made of the original charcoal needle felt carpet and is an excellent alternative to the expensive non-molded factory part. Look at your production number this carpet fits 1/72 production up where the jack is in the front of the trunk

Fitment





DOMESTIC CHARCOAL LOOP CARPET KIT, 914 1970-72 (MADE TO ORDER) - $200.00

Shop-fitted custom carpet kits for a new interior look our custom carpet kits are better because the material resembles the original and we have fit them in our restoration shop. The loop kit will brighten your interior and complete your restoration, while the plush will update your 914 to the later 911 look. The kits have 10 pieces and completely carpet the interior.



Fitment





DOMESTIC CHARCOAL LOOP CARPET KIT, 914 1973-76 (MADE TO ORDER) - $200.00

Shop-fitted custom carpet kits for a new interior look our custom carpet kits are better because the material resembles the original and we have fit them in our restoration shop. The loop kit will brighten your interior and complete your restoration, while the plush will update your 914 to the later 911 look. The kits have 10 pieces and completely carpet the interior.

Fitment





FOOT STEP PROFILE THRESHOLD SILL AND CARPET STRIPS SET OF FOUR; 914 - $199.50

Exact factory match aluminum thresholds and carpet strips. These 4 magnificent pieces, unavailable for years, compliment anyone who opens the doors on your 1970-73 914 or 914/6. They are made out of the same high quality 6063 billet aluminum the factory used over 30 years ago. Holes were drilled and countersunk with a cnc machine so they are precise and accurate. Countless hours went into the engineering and nothing was spared to reproduce these hard to find items. They are easily installed with supplied opaque factory rivets and stainless headed philips screws.

Fitment





914 DOOR SILL PLATE BLACK ALUMINUM - $45.00

Beautiful black aluminum threshold plate to replace that old warped plastic one of yours. Identical in every way, it will fool the concours judges.

Fitment





FLOOR PAN FRAME CENTER TUNNEL VINYL COVER SET, 914 1970 - $39.50

Perfect fit four piece floorpan frame center tunnel set, the final touch to your carpet and upholstry installation. As we all know all 70-74 Porsche 914 models had vinyl lightly glued over the frame and center tunnel members to hide the unsightly exposed painted metal. By now this material is often cracked shrunken and or ripped. What better but to replace it with factory fresh original material? This nifty kit comes with all four pieces and by part number is appropriate for 70 models 71 models or 72-74 models, and as an option you can install it onto your 75-76 model where the factory just painted these areas black! (did they really cheapen the car that much in the last two years? Easily glued in with a bit of our weatherstrip adhesive (part number rgr1001).

Fitment





FLOOR PAN FRAME CENTER TUNNEL VINYL SET, 914 1971 - $39.50

Perfect fit four piece floorpan frame center tunnel set, the final touch to your carpet and upholstry installation. As we all know all 70-74 Porsche 914 models had vinyl lightly glued over the frame and center tunnel members to hide the unsightly exposed painted metal. By now this material is often cracked shrunken and or ripped. What better but to replace it with factory fresh original material? This nifty kit comes with all four pieces and by part number is appropriate for 70 models 71 models or 72-74 models, and as an option you can install it onto your 75-76 model where the factory just painted these areas black! (did they really cheapen the car that much in the last two years? Easily glued in with a bit of our weatherstrip adhesive (part number rgr1001).

Fitment





FLOOR PAN FRAME CENTER TUNNEL VINYL RECOVER SET, 914 1972-76 - $39.50

Perfect fit four piece floorpan frame center tunnel set, the final touch to your carpet and upholstry installation. As we all know all 70-74 Porsche 914 models had vinyl lightly glued over the frame and center tunnel members to hide the unsightly exposed painted metal. By now this material is often cracked shrunken and or ripped. What better but to replace it with factory fresh original material? This nifty kit comes with all four pieces and by part number is appropriate for 70 models 71 models or 72-74 models, and as an option you can install it onto your 75-76 model where the factory just painted these areas black! (did they really cheapen the car that much in the last two years? Easily glued in with a bit of our weatherstrip adhesive (part number rgr1001). Beware of cheaper reproductions when doing restorations. We use factory vinyl in our kits for the perfect concourse match.

Fitment





CARPET FOR FRONT TRUNK BULKHEAD FIREWALL , FELT, 914 - $25.00



Fitment





914 STAINLESS COVERING FOOT STEP INNER OR CARPET STRIP SET - $99.00

Beautiful piece for the restorer! One always sees this upon the opening of the door. This strip fits against the door frame seal and screws into the rocker carpeting. This part often becomes warped from over tightening and brittle from age. Fits all year 914s but was originally fitted to the late 73-76 models. Please order new screws for a perfect installation.

Fitment





914 BLACK ANODIZED COVERING FOOT STEP INNER OR CARPET STRIP SET OF 2 - $154.00

Great new item! Tired of the cheap plastic carpet rail strips made by Porsche to replace the beautiful but discontinued brushed aluminum ones of the earlier years, we took it upon ourselves to contract to have made the late black strips in aluminum! This beautiful strip set of two will exactly replace your original plastic strips but will never warp crack or wallow out the screw holes! Perfect for even the closest concours inspection, you will love the look as well as the easy installation.

Fitment





914 LEFT URO SPEAKER HOUSING GRILLE - $99.50

Exact reproduction of the original speaker grille housing for the 914. Perfect to replace those missing or broken ones and restore your car to its original factory look.

Fitment





URO 914 SPEAKER GRILL HOUSING - RIGHT - $99.50

Nice reproduction of the no longer available factory speaker grill for the 914. This one is for the right passenger side

Fitment





DASH FACE MATERIAL KIT; 914, 914-6 1970-74 - $25.00

Our dash face material kit is the genuine article and brightens the sagging, peeling 30-plus year-old face panel. Installation is easy with spray trim adhesive. For a perfect concours appearance, remove the dash face steel plates and after attaching the new vinyl, restick the plates to the dash. Includes enough material to do the dash and the glove box door.

Fitment





DASH FACE MATERIAL KIT; 914 1975-76 - $25.00

Our dash face material kit is the genuine article and brightens the sagging, peeling 30-plus year-old face panel. Installation is easy with spray trim adhesive. For a perfect concours appearance, remove the dash face steel plates and after attaching the new vinyl, restick the plates to the dash. Includes enough material to do the dash and the glove box door.

Fitment





914 UPPER DASH PAD FACE KIT - $48.00

Upper dash face. This kit comes complete with smooth vinyl and padding this kit contains plenty of material to completely recover the peeling upper dash. (must drop dash or remove windshield and dash pad to install)

Fitment





RECOVERED FACTORY DASH, 914 1970-76 - $1,105.00

Beautiful genuine factory dash is the last word in interior restoration and required equipment for the perfectionist (less than perfectionists can purchase the cloth or plastic dash covers we sell) easily installed just by removing the lower dash pad, the radio, and the instrument cluster, and removing the seven plastic 13mm headed nuts that secure it. Perfect time to replace the upper dash vinyl! Compared to all other Porsche dashes and even the after market reskinning process, this part is a real bargain.

***special order and may take longer than usual to receive***

Fitment





914 DIN RADIO FACE PLATE; 1975-76 914 - $27.50

. Has your radio face plate been ruined from previous installation? Try one of our brand new ones! Available in regular or din cuts. It highlights any stereo installation!


Fitment





DIN RADIO FACE PLATE 914 1970-74 - $27.50

Has your radio face plate been ruined from previous installation? Try one of our factory fresh ones! Available in regular or din cuts. It highlights any stereo installation!

Fitment





RECOVERED KNEE PROTECTION STRIP FROM 1972 - $685.00



Fitment





STEERING COLUMN DASH COVER TRIM 914-6 TWO NEEDED SOLD EACH - $19.50

Missing from most 914-6 restoration projects these days are these steering column to dash frames. A nice detail the Porsche factory insist upon, no dash is complete without these! Sold each, two needed per car; fits either side.

Fitment





DASH TO WINDSHIELD BEAD; 914 1970-76 - $29.50

Long discontinued by the factory, this simple glue in part has by now deteriorated on all 914s and can only be replaced when the windshield is out. A must for any restoration, our profile is much more precise than the other cheap reproduction out there somewhere!

Fitment





SEAT BACKREST RECOVERING KIT 914 1970 LEFT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





SEAT BOLSTER RECOVERING KIT 914 1970 LEFT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat! Available in black, brown, buckskin, or white.

Fitment





SEAT BACKREST RECOVERING KIT 914 1971 LEFT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





SEAT BOLSTER RECOVERING KIT 914 1971 LEFT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





RECOVERED DOOR PANEL, LEFT, SMOOTH PEBBLE GRAIN 914 1970 - $219.50

Recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





914 DOOR PANEL RECOVERING KIT LEFT, SMOOTH PEBBLE GRAIN 914 1970 - $100.00

If your cardboard is good and you want to do it yourself, this recovering kit is for you. Consists of the correct material and perfectly sized for easy installation with a shallow staple gun

Fitment





RECOVERED DOOR PANEL, LEFT, PORSCHE CLOTH MATERIAL; 914 1970-76 - $240.00

Recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory Porsche material. Very unique.

Fitment





RECOVERED DOOR PANEL, LEFT SMOOTH; 914 1971 - $219.50

Recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





RECOVERED DOOR PANEL, RIGHT, SMOOTH PEBBLE GRAIN 914 1970 - $219.50

Recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color of smooth or pebble grain for this 1970 914 door panel only.

Fitment





914 DOOR PANEL RECOVERING KIT RIGHT, SMOOTH PEBBLE GRAIN 914 1970 - $100.00

If your cardboard is good and you want to do it yourself, this recovering kit is for you. Consists of the correct material and perfectly sized for easy installation with a shallow staple gun

Fitment





DOOR PANEL RIGHT 914 1971 - $219.50

Call for availability recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





914 REPRO DRIVER SIDE DEPOSIT ARMREST BOX POCKET - $200.00

Now a solution for the warped discontinued cardboard drivers side deposit box! Covered in factory match black vinyl, it will never warp again and stand the test of time.

Fitment





BACK PAD RECOVERING KIT 914 1970 - $155.00

Back pad recovering kit our back pad recovering kit does a flawless job of renewing your torn or damaged back pad vinyl. Our seamstress works her fingers to the bone, putting all of the original stitching in these pieces. We offer all factory colors so you can have professional results in little time with very little money. Available in black, brown, or tan, 70 is a two piece kit only.

Fitment





BACK PAD RECOVERING KIT 914 1971 - $155.00

Back pad recovering kit our back pad recovering kit does a flawless job of renewing your torn or damaged back pad vinyl. Our seamstress works her fingers to the bone, putting all of the original stitching in these pieces. We offer all factory colors so you can have professional results in little time with very little money.
available in black, brown, buckskin, or white.

Fitment





BACK PAD RECOVERING KIT 914 1972-74 - $155.00

Back pad recovering kit our back pad recovering kit does a flawless job of renewing your torn or damaged back pad vinyl. Our seamstress works her fingers to the bone, putting all of the original stitching in these pieces. We offer all factory colors so you can have professional results in little time with very little money. Available in black, brown, buckskin, or white.


Fitment





914 THERMAL FORMED BACK PAD - 3 PIECE KIT - $260.00

Thermally formed plastic back pad core replacement, foam is not included.

Fitment





SEAT BACKREST RECOVERING KIT 914 1970 RIGHT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





SEAT BOLSTER RECOVERING KIT 914 1970 RIGHT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





SEAT BACKREST RECOVERING KIT 914 1971 RIGHT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





SEAT BOLSTER RECOVERING KIT 914 1971 RIGHT - $82.50

Automobile atlanta’s 914 seat upholstery kits of original material we make these excellent seat reupholstering kits from the original material and use them in our restoration shop. Each 914 seat consists of three parts: the cushion, the backrest and the bolster back (the smooth part). You will need all three to completely recover your seat. Available in black, brown, buckskin, or white.

Fitment





LARGE INTERIOR PLUG 914 DASH AND DOOR POCKET - $4.50

This large interior plug fits on either side of the lower dash pad and also on the left armrest pocket to hide the attachment screws. Long discontinued by the factory, we have just completed this excellent reproduction.

Fitment





DOOR PANEL LEFT, BRICK WEAVE; 914 1972-74 - $219.50

Special notice: this is a pre-production item and is not yet ready for shipment. Orders placed for this item are counted as interest in the item, not as an order that will be immediately filled. If you would like this item to be produced please add it to your order and you will be contacted before it is shipped.

recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





LEFT DOOR PANEL (BASKET WEAVE), 914--1975-76 - $219.50

Recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





LEFT DOOR PANEL (BASKET WEAVE), 914--1975-76 BUCKSKIN - $219.50

Call for availability recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





DOOR PANEL, RIGHT, BRICK WEAVE; 914 1972-74 - $219.50

Special notice: this is a pre-production item and is not yet ready for shipment. Orders placed for this item are counted as interest in the item, not as an order that will be immediately filled. If you would like this item to be produced please add it to your order and you will be contacted before it is shipped.

recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





RIGHT DOOR PANEL (BASKET WEAVE), 914--1975-76 - $219.50

Call for availability recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





RIGHT DOOR PANEL (BASKET WEAVE), 914--1975-76 BUCKSKIN - $219.50

Call for availability recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





REAR TRUNK INSULATOR PAD, 914 1973-76 - $75.00

A beautiful copy of the original 1973-76 rear trunk insulator pad. No concours restoration is complete without it.

Fitment





SOUND ABSORBER OVAL FOR LONGITUDINAL FOUR REQ - $9.50

Known as: damping mat

Fitment





914 CUSTOM CUT FLOOR PAN TAR KIT, 6 PIECES - $175.00

Custom made for the 914; cut into 6 pieces for an excellent fit on the floor pan.

Fitment





LINING REAR LEFT; 914 - $45.00



Fitment





LINING, REAR RIGHT 1972-76 - $39.50



Fitment





SOUND ABSORBER REAR CENTER TUNNEL FOR PORSCHE 914 - $35.00

Known as: damping mat

Fitment





914 ENGINE INSULATOR SOUND PAD FIREWALL MAT - $199.50

This is made from the latest waterproof and sound deadening materials and provides twice the sound deadening and heat insulating qualities of the original no longer available part. Easily installed part will pass the strictest concours inspection! Great addition to the 1970-72 models that did not have an insulator pad installed at the factory.

Fitment





ROLL BAR CHROME CLIP - $11.50

These clips hold the roll bar chrome trim in place. Two required per side.


Fitment





VW EUROPEAN EMBLEM, GOLD, 914-6 - $195.00

Brighten up your 914-6 with this factory-correct gold plated european emblem. For u. S . Versions order the regular 914-6 emblem 914-6 vw Porsche emblem (gold).

Fitment





GOLD 914-6 EMBLEM BADGE - $79.50

914-6 emblem, us version (gold) brighten up your 914 by replacing damaged or missing emblems. Original factory emblems at a great price, the final touch for your restoration project.
we only have a few of these left and they won\'t be available anymore after they are gone. All of them have some blemishes.

Fitment





1.7 INSIGNIA - $39.50



Fitment





2.0 EMBLEM INSIGNIA 914 METAL - $39.50

914-4 1973-76 2. 0 emblem (black metal) brighten up your 914 by replacing damaged or missing emblems. Original factory emblems at a great price, the final touch for your restoration project. Make sure you order two emblem clips to secure pn 99959142302 this is our own great automobile atlanta reproduction and rivals the original and rare 73 metal emblem
known as: logo

Fitment





SPACER ROCKER PANEL VALANCE SPOILER 914 - $3.45

Perfect reproduction of a long discontinued part requires eight per 914 spaces the front and rear of the rocker panel as well as the front spoiler valance and the rear valance on all 914s.

Fitment





DISTANCE WASHER 914 VALANCES ROCKER PANELS AND SPOILERS - $4.50

Great reproduction of the long discontinued rubber spacer for the rocker panels and valances on all 914s eight required per car

Fitment





FENDER TO COWL SEAL - $3.90

Critically important part to keep the fender to cowl joint from rusting. Easily installed virtually pops right in, don\'t let your body man paint these over!


Fitment





FENDER TO COWL SEAL SET - $7.80

The best reproduction of this long discontinued factory part, critical to keep the cowl and fender from rusting. Plasticized rubber, exact like the factory originals, and plenty long for a great seal. Beware of the cheap rubber imitations.
kit consists of:

2 - b91455915510 - fender to cowl seal



Fitment





TRIM FLOOR PAN DEFLECTOR - $22.50



Fitment





DISTANCE PIECE 914 - $2.00

#14

Fitment





HORN FOG GRILLE WITH DRIVING LIGHT HOLE, LEFT 914 - $69.50

Excellent replica of the original 914 chrome fog driving light grill

Fitment





HORN GRILLE WITH DRIVING FOG LIGHT HOLE, RIGHT CHROME 914 - $69.50

Excellent reproduction of the original at a fraction of the price

Fitment





ENGINE SHELF PLUG, 914-6 - $9.50

For 914-6. Discontinued by Porsche, but limited availability at 914 world headquarters! Great reproduction!

Fitment





ENGINE SHELF PLUG - $19.50

Engine shelf plug for the 914-6 additional fuel line hole

Fitment





FRONT RUBBER PANEL PLUG 914 - $4.50

Discontinued by Porsche, this rubber plug covers holes found in the metal floor panels. Sold each, 9 are neede to cover all holes.

Fitment





FRONT RUBBER PANEL PLUG 914 - SET OF 9 - $32.00

Discontinued by Porsche, this rubber plug covers holes found in the metal floor panels. Sold each, 9 are neede to cover all holes.

Fitment





914 CHROME HORN GRILL SET OF TWO - $69.50

Great deal! Set of two autoatlanta chrome horn grilles for your 914

Fitment





914 HORN GRILL W/O HOLE PASSENGER SIDE - $39.50

Known as: grille

Fitment





ROLL BAR COVER 914 - $30.00



Fitment





PASS ROLL BAR VINYL FOR SAIL PANEL 914 - $49.50

Beware of cheaper reproductions when doing restorations. We use factory vinyl in our kits for the perfect concourse match.

Fitment





EMBLEM, 914 GOLD - $49.50

Gold Porsche 914 badge. Finally! As you all know the factory had discontinued the standard equipment gold \"914\" emblems for years, with no aftermarket substitute available. We had had our project to reproduce these planned for awhile but more importantly had to complete the gold 914-6 usa and european badges. We now have these ready for your 1970-1972 model. Heavy gold plated emblems are a must for any concours restoration and great to add to any 914 where you want a touch of gold. Fits perfectly into the two holes on your rear panel!

Fitment





EMBLEM INSIGNIA BLACK METAL 914 - $43.50

Brighten up your 914 by replacing damaged or missing plastic emblem with this high quality metal aftermarket one. As you all know the original 914 emblems were aluminum until late 1973 when the factory changed them to cheap plastic! We took it upon ourselves to make great replicas of these original emblems in metal so that we would have a lasting part to compliment you expensive 914 restoration. Make sure that you also order two factory emblem clips part number 999 591 211 01

Fitment





914 2.0 EMBLEM DECAL, SELF-ADHESIVE VINYL - $19.50

Exact duplicate of the original no longer available factory part, this easily installed decal is mandatory for late 1975 and all 1976 models for concours perfection and an inexpensive way to install the script on any model 914.

Fitment





914 CENTER CONSOLE HEATER LEVER PROFILE TRIM BEZEL INSERT - $19.50

This fits in the 914 console base plate slot where the console heater lever exits. Prevents the base plate vinyl covering from damage.

Fitment





REPRODUCTION 914 CENTER CONSOLE, WITH HOLES FOR AFTERMARKET GAUGES - $245.99

Our 914 appearance group console is a work of art! An exact duplicate of the factory console, it is made of thicker wood and cut for the optional vdo gauges. All you will need is our console heater switch to complete the job. This console will give your 914 a plush, sophisticated look as well gauge what your 914 is doing! Holes fit aftermarket 2 1/16\" vdo gauges. Gauges not included.

note: these center consoles are built to order and will take additional time to ship.

Fitment





REPRODUCTION 914 CENTER CONSOLE, WITH HOLES FOR FACTORY GAUGES - $245.99

Our 914 appearance group console is a work of art! An exact duplicate of the factory console, it is made of thicker wood and cut for the optional vdo gauges. All you will need is our console heater switch to complete the job. This console will give your 914 a plush, sophisticated look as well gauge what your 914 is doing! Gauges not included.

note: these center consoles are built to order and will take additional time to ship.

Fitment





DRIVING, FOG LIGHT HORN GRILLE SCREW AND CLIP HARDWARE INSTALL KIT; 914 - $10.00

Whenever you replace the driving light grilles, it is then that you find out that the hardware looks bad! Complement your new grilles with new hardware. Eight screws, eight clips; everything you need for a perfect installation.

Fitment





PORSCHE 914 WINDSHIELD TOP SEAL - $169.50

Our own great reproduction of the original factory seal now available at a super price! This is the one that seals the vent glass to the windshield frame as well as sealing the top to the windshield frame. A must to keep out the rain!

Fitment





TOP RELEASE PLASTIC LATCH HANDLE ONLY - $24.50



Fitment





TARGA TOP REAR SEAL 914 - $59.50

Attached to the rear of the targa top, this high quality reproduction seal should last even longer than the no longer available original. Never have we seen a better one, except for the factory original. Ours is vulcanized and molded for the best fit in the industry. Then we flock it with felt for a smooth squeak free fit. Beware of the cheap glued seals that do not fit like ours do!

Fitment





REAR 914 TARGA TOP LATCH HOOK ONLY DRIVERS LEFT SIDE - $29.50

New reproduction item that is powder coated for great durability.

Fitment





914 REAR TARGA TOP LATCH HOOK ONLY RIGHT SIDE - $29.50



Fitment





LOWER FRONT TARGA TOP SEAL 914 - $29.50

Our brand new reproduction of the lower targa top seal now compliments our upper seal. Made from the highest quality weather strip rubber, original seals are now finally failing at an alarming rate. This seal replaces the old original and dramatically increases top sealing, reduces wind noise, and keeps out the weather! Easily installed in minutes, you will love the improvement.

Fitment





BACK ORDER - TARGA TOP ROOF SHELL; 914 1970-76 - $900.00

This is a completely refinished fiberglass targa top shell to replace your damaged or missing unit. Great care is taken to reproduce the outer finish to match the factory-new look.

note: this is just the shell; all hardware and seals sold separately, or transfer from your existing top.

Fitment





AIR BOX SEAL; 914 1973-76 - $25.00

Often overlooked during restorations, this necessary seal prevents water from leaking into the front trunk ventilation gas tank compartment. This is a molded part and therefore an exact fit to the 914 blower box screen and box.

Fitment





AIRBOX FRAME SEAL 914 1970-73 - $35.00

Often overlooked during restorations, this necessary seal prevents water from leaking into the front trunk ventilation gas tank compartment. This is a molded part and therefore an exact fit to the 914 blower box.

Fitment





HEATER BLOWER BRANCH PIECE TWO OUTLET - $29.50

Heater blower branch as originally installed on all 75. 5 -76 914 models to distribute the air blower to both the drivers and passenger side for increased heat flow. Please also purchase our heater blower hose

Fitment





914 RUBBER MOUNT - LONG WIPER MOTOR MOUNT - $12.50

Known as: rubber buffer

Fitment





KARMANN BADGE PLATE 914 - $29.50

Newly produced karmann body plate, found in the driver\'s side front door jamb of all 914 models. To attach, use rivet set, 90005500102.

Fitment





ID PLATE FOR HEADLIGHT BOX, 914-6 - $75.95

Excellent reproduction of the 914/6 identification plate found on the side of the headlight box. Replace your missing or weathered plate with a shiny new one!

Fitment





914 650 PIECE BODY HARDWARE KIT 914 HARDWARE KIT - $149.50


for the first time in recorded 914 history comes and all in one complete interior hardware kit. Every nut and bolt and screw and clip that you need to reassembly you interior in one carefully put together kit. Dr 914 worked with the winzer hardware representative in one three hour session pouring over the original Porsche 914 factory parts catalog calling out every piece of hardware famous \"8\" body section of the book. Now with the exception of the seat belt bolts you can own with one click of the mouse, every piece of hardware missing from that basket case 914 you purchased. Carefully labeled as to its use, and including rockers spoilers and valance hardware, you will be delighted to install this beautiful hardware onto and into your beautiful 914. Just the information sheet is worth its weight in gold for its proper information about what goes where! No improper hardware for your car ever again! Bargain priced at a fraction of what the individual pieces would cost and includes over 650 pieces in three nice plastic storage bins.

Fitment





914 EXTERIOR MIRROR GASKET 5 1/4 INCH - $9.50

Finally, a mirror gasket for your factory exterior mirror! Along with our reproduction mirror glass, you can finally save your valuable factory mirror! This gasket is for the 5 1/4 inch glass. Great value.

Fitment





914 EXTERIOR MIRROR GASKET 5 INCH - $9.50

Special notice: this is a pre-production item and is not yet ready for shipment. Orders placed for this item are counted as interest in the item, not as an order that will be immediately filled. If you would like this item to be produced please add it to your order and you will be contacted before it is shipped.

finally, a mirror gasket for your factory exterior mirror! Along with our reproduction mirror glass, you can finally save your valuable factory mirror! This gasket is for the 5 inch glass. Great value.

Fitment





914 MIRROR BASE SEAL - $2.75

Exellent reproduction for the fussy concours enthusiast who demands the best. Fits between the outer mirror and the doorskin was factory original equipment until discontinued. Our repro is excellent and made of high quality nylinized rubber for long life

Fitment





914 CENTER VISOR MOUNT CLIP - $19.50

We were aghast at the outrageous factory prices for these parts and just when our stomachs settled down and about got used to the prices, they discontinued these pieces! Perfect fit visor clip, just use your existing pins.

Fitment





914 REPLACEMENT EXTERIOR MIRROR GLASS, 5 1/4 INCH - $24.95

Great news! Mirror glass replacements are finally available for your 914 exterior mirror! Easily replaced by just popping out the plastic retainer, we wondered why the factory never made them available. We found a great firm in florida who does a great job in both providing the thinner european grade mirror glass, plus die cutting these replacements to perfection, so you can be guaranteed a perfect fit! Please measure your mirror prior to ordering. Usually 70-71 used the 5 inch mirror glass and the 72-76 used the 5 1/4 variety. However, over time your side mirrors may have been swapped with a different version.

you will be absolutely delighted with your purchase. If your mirror gasket is broken or missing, we have that too- b914731039b.

Fitment





914 REPLACEMENT EXTERIOR MIRROR GLASS, 5 INCH - $22.95

Great news! Mirror glass replacements are finally available for your 914 exterior mirror! Easily replaced by just popping out the plastic retainer, we wondered why the factory never made them available. We found a great firm in florida who does a great job in both providing the thinner european grade mirror glass, plus die cutting these replacements to perfection, so you can be guaranteed a perfect fit! Please measure your mirror prior to ordering. Usually 70-71 used the 5 inch mirror glass and the 72-76 used the 5 1/4 variety. However, over time your side mirrors may have been swapped with a different version.



Fitment





914 RUBBER PLUG HEADLIGHT EYEBROW GROMMET - $4.50

This special rubber grommet attaches the headlight eyebrow in front of the headlight cover to the body. Six required per car
known as: stopper

Fitment





PRESS STICKER SET / LABEL SET FOR SEAT BELT RECEIVER - $6.50

This finishing detail for your 914, and important for safety as well. For 1972-76 914 seat belt receivers; set of two.

Fitment





FLOORPAN AND CLAMSHELL KIT; SAVE $54.75 - $492.77


kit consists of:

1 - b91450704110 - rear floor pan jacking triangle, left, 914 1970-76 - normally $66. 00

1 - b91450704210 - right rear floor pan jacking triangle , 914 1970-76 - normally $66. 00

1 - b91450101314 - rocker clamshell ,set of two; 2% off! - normally $415. 52



Fitment





SCREWDRIVER SET - $75.00

As provided by the factory to replace those missing ones in your tool kit!

Fitment





BUTYL WELD TAPE FOR 914 WINDSHIELD INSTALLATION - $19.50

15 feet of 1/4 inch butyl weld tape

Fitment





WINDOW REGULATOR BUTTON ROLLER - $14.30

Wonder why your 1970-72 side window suddenly comes crashing down? The window regulator button is worn and has come loose from the regulator lifting pin. Secure it now with a fresh new regulator button. Never available by itself, our friend at the 914 owners association took it upon himself to solve the problem with this high quality part.

Fitment





COMPLETE 916 BODY KIT WITH FLARES; SAVE $97.00 - $1,843.00


kit consists of:

1 - rmit1407 - front 916 fiberglass bumper - normally $375. 00

1 - rmit1408 - rear 916 fiberglass bumper / stock fenders - normally $375. 00

1 - b914503908gt - reproduction 914 gt steel fender flares, set of four - normally $975. 00

1 - rmit1433 - flared fiberglass 914 gt rocker panel for flares - pair - normally $215. 00



Fitment





HOOD CATCH REAR 911 912 - $78.78

Known as: lock upper part

Fitment





RUBBER GROMMET FOR 914 ENGINE DRIP PAN DRAIN TUBE HOSE - $9.00



Fitment





RUBBER SEAL WEATHER STRIP KIT - 914; SAVE $68.57 - $617.18

Available only from automobile atlanta, this kit consists of parts that we use in our restoration shop without going overboard.
kit consists of:

1 - b91456303910 - Porsche 914 windshield top seal - normally $169. 50

1 - b91451190110 - front trunk hood seal 914 - normally $74. 50

2 - b91463140506 - side marker seal 914 - two required - normally $24. 00

1 - b91453182110 - 914 left inner door seal (on body) - normally $35. 00

1 - b91453182210 - 914 right inner door seal (on body) - normally $35. 00

1 - b91453181310 - 914 left outer door seal (on door) - normally $44. 00

1 - b91453181410 - 914 right outer door seal (on door) - normally $44. 00

2 - b91455915510 - fender to cowl seal - normally $7. 80

1 - b91453118510 - left targa top side seal - normally $38. 50

1 - b91453118610 - right targa top side seal - normally $38. 50

1 - b91453114310 - 914 left rollbar seal
- normally $38. 50

1 - b91453114410 - right rollbar side seal - normally $38. 50

1 - b91455226310 - dash to windshield bead; 914 1970-76 - normally $29. 50

1 - b91451231910 - rear lid to glass seal - normally $16. 00

1 - b91451231710 - rear trunk seal 914 - normally $35. 95

1 - b91463193900 - 914 tail light lens seal, pair - normally $16. 50



Fitment





COMPLETE DELUXE RUBBER WEATHER STRIP SEAL KIT - 914 SAVE $106.99; SAVE $106.05 - $954.49

Our rubber kits are for the perfect restoration. Available only from automobile atlanta, this kit consists of everything we use in our restoration shop.

kit consists of:

2 - b91463140506 - side marker seal 914 - two required - normally $24. 00

2 - b91463195710 - 914 front turn signal seal - two required - normally $27. 00

1 - b91451190110 - front trunk hood seal 914 - normally $74. 50

1 - b91451190210 - front bulkhead seal; 914 1970-76 - normally $18. 95

2 - r91462820311 - swf washer nozzle (oem) - normally $16. 00

2 - r90162892600 - genuine Porsche wiper arm cap - normally $12. 00

2 - b91455915510 - fender to cowl seal - normally $7. 80

1 - b91455226310 - dash to windshield bead; 914 1970-76 - normally $29. 50

1 - b91456303910 - Porsche 914 windshield top seal - normally $169. 50

1 - b91453187310 - left door window squeegee 914 - normally $6. 50

1 - b91453187410 - right door window squeegee 914 - normally $6. 50

1 - b91453181310 - 914 left outer door seal (on door) - normally $44. 00

1 - b91453181410 - 914 right outer door seal (on door) - normally $44. 00

1 - b91453182110 - 914 left inner door seal (on body) - normally $35. 00

1 - b91453182210 - 914 right inner door seal (on body) - normally $35. 00

1 - b91457112910 - air box seal; 914 1973-76 - normally $25. 00

1 - b91453118510 - left targa top side seal - normally $38. 50

1 - b91453118610 - right targa top side seal - normally $38. 50

1 - b91453114310 - 914 left rollbar seal
- normally $38. 50

1 - b91453114410 - right rollbar side seal - normally $38. 50

2 - bpcg53160100 - large door handle seal 914 - normally $9. 00

2 - bpcg53160300 - small door handle seal 914 - normally $9. 00

2 - g91455926710 - rocker panel jack hole plug - normally $11. 86

1 - b91451231710 - rear trunk seal 914 - normally $35. 95

1 - b91451231910 - rear lid to glass seal - normally $16. 00

1 - b91451231510 - rear trunk seal, front; 914 1970-76 - normally $17. 50

1 - b91456307711 - targa top rear seal 914 - normally $59. 50

1 - b91463193900 - 914 tail light lens seal, pair - normally $16. 50

1 - b91450410510 - 914 engine grille to lid welting - normally $9. 50

1 - b91456331910 - lower front targa top seal 914 - normally $29. 50

1 - s91454232510 - vent window seal - normally $58. 49

1 - s91454232610 - vent window seal - normally $58. 49



Fitment





GT SPORT SEAT, 914-6 914 - $550.00

Out of the vintage 914 parts cellar comes the 914-6 gt sport seat. This seat, designed and built at 914 world headquarters, is super comfortable and gives the extra support never found in its production line counterpart. The high bolster factory seat is a direct bolt-in, not a sloppy retrofit, and is covered with perfect match factory material. Why didn’t the factory make these seats? Limited quantity 914 sport seat. Trade in your seats! If they are perfect, they are worth $100. 00 each.

Fitment





914 FRONT WINDSHIELD INSTALLATION KIT; SAVE $12.31 - $75.60

Front windshield installation kit the ultimate kits for 914 glass installation. Everything you need to insure a perfect factory installation of your 914 windshield. Installation kit includes among other parts, the rare windshield chrome strip clips and the mirror patch in one kit, plus the most important thing, precise instructions!


kit consists of:

1 - r90173113320 - o. E . M . Mirror base patch 914 pad - normally $2. 55

2 - g91454190710 - rubber spacer - normally $11. 72

1 - b914wibutyl - butyl weld tape for 914 windshield installation - normally $19. 50

19 - g91454192111 - clip windshield chrome 914 - normally $48. 64

1 - btc1041 - windshield replacement guide - normally $5. 50



Fitment





REAR WINDOW INSTALLATION KIT; 914 1970-76 - $25.00

Rear window installation kit the ultimate kits for 914 glass installation. Everything you need to insure a perfect factory installation of your 914 rear window. Each kit provides exactly what you need for an easy at home installation. Most importantly are the precise instructions!
kit consists of:

1 - b914wibutyl - butyl weld tape for 914 windshield installation

1 - btc1024 - rear window reseal procedure



Fitment





914 DOOR PANEL HARDWARE INSTALL KIT; 10% OFF! - $21.65

This early 914 door panel hardware kit includes all of the hardware you would require to install a fresh door panel. If you are going to have your door cards recovered, why tarnish the new appearance with oxidized hardware and broken clips? Includes a variety of critical parts to connect the door panel to the door. One kit needed per door, two per car.

if you are looking for this kit to fit your 1975-1976 914, please refer to part # baa556
kit consists of:

9 - r823867299 - door panel clip; 924 1976-79 - normally $9. 00

2 - r90006711101 - allen bolt 5x22 - normally $2. 00

2 - r99950731802 - speed nut-cage nut 5mm - normally $6. 00

3 - r99959110212 - chrome cup washer 914 door pocket - normally $3. 75

3 - r90014500602 - 3. 5x19 screw (117. 35. 19) - normally $3. 30



Fitment





DOOR PANEL HARDWARE KIT; 914 1975-76 - $28.55

This late 914 door panel hardware kit includes all of the hardware you would require to install a fresh door panel. If you are going to have your door cards recovered, why tarnish the new appearance with oxidized hardware and broken clips? Includes a variety of critical parts to connect the door panel to the door. One kit needed per door, two per car.

if you are looking for this kit to fit your 1970-1974 914, please refer to part # baa555
kit consists of:

9 - s823867299 - o. E . M . Door panel clip

3 - r99959131140 - fastening clip bushing

2 - r90006711101 - allen bolt 5x22

2 - r99950731802 - speed nut-cage nut 5mm

3 - r99959110212 - chrome cup washer 914 door pocket

3 - r90014500602 - 3. 5x19 screw (117. 35. 19)



Fitment





DOOR JAMB COMPLIANCE DOT STICKER DECAL; 914-6 1970-71 - $11.00

Ultimate touch for the concours enthusiast and the last part installed. Duplicate of the factory applied sticker in the door jamb designating who built it and when. This one specifically for the great 914-6 self adhesive, gives your 914 factory identity. Please see our other door jamb decals for the four cylinder models

Fitment





1970--1972 914 DOOR JAMB COMPLIANCE DOT STICKER DECAL - $11.00



Fitment





DOOR JAMB COMPLIANCE DOT STICKER DECAL; 914 1973-76 - $11.00

Ultimate touch for the concours enthusiast and the last part installed. Duplicate of the factory applied sticker in the door jamb designating who built it and when along with weights. Self adhesive, gives your 914 factory identity.

Fitment





LEFT DOOR PANEL, SMOOTH, 914---1971 - $219.50

Very limited supply, call for availability recovered door panel. Our recovered door panels are factory duplicates covered in fresh factory match vinyl. A must for the concours enthusiast! Please state color when ordering. Black 01, brown 02, tan 03, white 04.

there is a core charge, which is refundable upon receiving your rebuildable part.

Fitment





10 PIECE CHASSIS STIFFENING KIT; 914 - $195.00

The chassis stiffening kit is a must for ultimate handling- both the 914-6 gt and the 916 had them installed by the factory. You will never know what you\'ve missed until you drive one with and then without the kit. The \"with\" is so much more definite in a hard corner, not suffering the chronic 914 flex. The kit is comprised of 10 pieces, and installation entails removal of the swing arms to weld in place.

Fitment





914 FLARES AND ROCKER PANELS, SET - $1,190.00

Get the complete \"gt\" look with this set of gt metal flares and matching flared gt rocker panels.

kit consists of:

1 - b914503908gt - reproduction 914 gt steel fender flares, set of four

1 - rmit1433 - flared fiberglass 914 gt rocker panel for flares - pair



Fitment





LARGE DOOR HANDLE SEAL 914 - $4.50

This is the seal behind the door latch base. Made of nylonized rubber, this seal will never shrink or split. Sold each, fits left or right side.

Fitment





4-PIECE DOOR HANDLE SEAL SET 914; 5% OFF! - $17.10

Don\'t reinstall weathered and worn rubber seals when replacing your door handles. This is a set of four door seals- two larger main seals and two smaller seal. Made of nylonized rubber, these seals will never shrink or split. This set is a necessity when restoring a car and installing new chrome handles.
kit consists of:

2 - bpcg53160100 - large door handle seal 914 - normally $9. 00

2 - bpcg53160300 - small door handle seal 914 - normally $9. 00



Fitment





SMALL DOOR HANDLE SEAL 914 - $4.50

This is the small seal behind the door latch base towards the edge of the door. Made of nylonized rubber, this seal will never shrink or split. Sold each, fits left or right side.

Fitment





REAR BUMPER TOW EYE PLUG CHROME 914 70-74 - $19.50

This chrome plug replaces the broken or missing one found in the rear chrome bumper of 1970-72 914.

Fitment





ENGINE GRILL LETTERING KIT PORSCHE CHROME/SILVER; SAVE $23.63 - $212.68

Plastic chrome \"Porsche\" lettering kit for all of the above captioned models. This is a duplicate of the original chromed plastic letters installed on the engine grille of all 74-76 914 models. The kit includes seven plastic chromed letters, fourteen clips, and a lettering grid for placement. Easily installed just remember not to tighten the nuts too much or the lettering peg will break!
kit consists of:

1 - g90155930123 - Porsche silver letter set, chrome - normally $217. 31

14 - r99959142303 - o. E . M . Speed nut - normally $14. 00

1 - brbkenglet - 914 engine lid Porsche letter application - normally $5. 00



Fitment





PORSCHE 914 FRONT FLOOR PAN - $207.00

The front half of the floor pan is for vehicles with a real rust problem and covers from the front of the lateral reinforcement under the seats to the back of the pedal cluster. This item requires an additional shipping charge.

Fitment





PORSCHE 914 REAR FLOOR PAN - $207.00

The rear half of the floor covers from the rear firewall to just in front of the reinforcement under the seats. This item is oversized and will require an additional shipping charge.

Fitment





DOOR GLASS ADJUSTMENT AND MAINTENANCE, 1970-73; 914 - $5.50

914 window adjustment guide everything you need to know about adjusting your 1970-73 window glasses in one handy guide. Don’t be without it.

Fitment





REAR WINDOW RESEAL PROCEDURE - $5.50

This procedure, as well as many others, are listed in the 914 tech tips 700, part number rbk7074.

Fitment





ROTISSERIE BUILDING INSTRUCTIONS (PLANS); 914 1970-76 - $16.50

For the 914 owner who has dismantled his car to the body shell and is starting from scratch, this rotiserie is the perfect tool. Customed designed to perfectly mount the 914 body, these step by step instructions are easy to follow even for the amatuer. Once the uprights are built it is easy to substitute other crossbars to fit other Porsche models

Fitment





SEAT ADJUSTER LOOP REPLACEMENT GUIDE - $5.50



Fitment





914 TRUNK HINGE CUP PIVOT REPLACEMENT PROCEDURE INSTRUCTIONS - $5.50

Trunk hinge cup replacement procedure written by the doctor himself. This procedure, as well as many others, are listed in the 914 tech tips 700, part number rbk7074.

Fitment





WINDSHIELD REPLACEMENT GUIDE - $5.50



Fitment