PORSCHE 911 HEAT MATERIAL
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Ebc brakes redstuff low dust ceramic rear brake pads Porsche 911 3.3t 77-91
High performance lowest dust rating pads for prestice imports and faster street driving. There are two reasons our customers love redstuff. First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge was as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up.
This material is a kevlar fibre based brake compound enhanced with ceramic particles. If you have previously tried ebc redstuf (pre-cer...(choose a part on the right to read more)
General Fitment 911 1974-77
Power slot rear right slotted rotor Porsche 964 Carrera 2 2s 90-94
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. As any ...(choose a part on the right to read more)
General Fitment 911 1989-94 944 1985-88 944 1989-91 968 1992-95 911 1994-98
Power slot front left slotted rotor Porsche 964 Carrera 2 2s 4 4s 90-94
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. As...(choose a part on the right to read more)
General Fitment 911 1989-94
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup.
The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & racing system ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,586.45
Make a selection
Power slot front right slotted rotor Porsche 964 Carrera 2 2s 4 4s 90-94
Porsche is known for their racing heritage and dedication to maximum performance, making them one of the most respected marquees in the automotive industry. Classic looks, modern performance, and German engineering set it apart from mass produced cars. Unfortunately many vehicles braking systems are compromised in regards to performance to reduce costs. A factory brake system is designed to handle normal stop and go traffic, not continuous aggressive braking in high temperature situations.
What good is power without control? The ability to stop quickly is just as important as accelerating quickly, especially on a race track. A...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
Schnell cold air intake Porsche 996 98-04
Increase your airflow and horsepower in a few easy steps. Schnells 4 ply, silicone hose will allow for much better airflow while still protecting your air box from costly backfires, unlike the competition. The silicone material does not retain heat which can rob your engine of valuable horsepower. This intake installs in less then 15 minute. A cinch for any skill level. Our introductory sale price is also 35% less then anything else on the market. We also recommend installing the K&N air filter element for even more airflow & horsepower.
Features:
-better throttle response
-quicker acceleration
-more aggressive intake note
-installs in 15 minute...(choose a part on the right to read more)
General Fitment 911 1998-05
Fidanza aluminum flywheel Porsche 993 rs 94-97
Fidanza aluminum flywheels are made from the highest quality 6061 t6 aluminum.the material is fantastic for strength, heat dissipation and of course reduction in weight.the friction surface used is an incredibly strong 1050 steel.the plates are milled to meet fidanzas high specifications. A fidanza flywheel can mate with any type of clutch material, including organic, kevlar, ceramic, metallic and sintered iron. Fidanza attaches the friction surface with military grade aerospace fasteners.the ring gears used are also made from 1050 steel and are heat treated for durability. The gears are heated then pressed on and secured with grade 8 button screws. Fidanza w...(choose a part on the right to read more)
General Fitment 911 1994-98
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is a very aggressive setup.
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & rac...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,586.45
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultr...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & racing system
Holding...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup.
The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & racing system ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,586.45
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
U...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & racing system
Holding...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,502.96
Make a selection
Each hose sold seperately. These long-lasting aircraft quality heater hoses conduct only the hottest heat to the front of your Porsche, while providing flex during engine movement! Order 4 hose clamps as well! Fit under the car near the engine and connect between the heater control valve and the body. 60 x 330 mm
View/Change Diagram
From $23.10
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup.
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,586.45
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup.
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,586.45
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & racing system
Holding...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,502.96
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup.
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,783.96
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra he...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,502.96
Make a selection
Fidanza aluminum flywheel Porsche 930 95-96
Fidanza aluminum flywheels are made from the highest quality 6061 t6 aluminum.the material is fantastic for strength, heat dissipation and of course reduction in weight.the friction surface used is an incredibly strong 1050 steel.the plates are milled to meet fidanzas high specifications. A fidanza flywheel can mate with any type of clutch material, including organic, kevlar, ceramic, metallic and sintered iron. Fidanza attaches the friction surface with military grade aerospace fasteners.the ring gears used are also made from 1050 steel and are heat treated for durability. The gears are heated then pressed on and secured with grade 8 button screws. Fidanza was ...(choose a part on the right to read more)
General Fitment 911 1994-98
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable ceramic disc. Rigid disks are designed to be used with aftermarket lightweight flywheels (lwfw) only. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The un-sprung solid hub design allows for instant engagement and disengagement in any application, rendering it extremely hard for street use, and is therefore recommended for racing applications only. This disc is designed for outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra he...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,690.07
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & racing system
Holding...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,690.07
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4 puck configuration, which is very aggressive and not recommended for a street setup.
The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & racing syste...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09
$2,644.52
Make a selection
The clutch masters fx400 system uses the power plus i pressure plate with a custom, extremely durable, sprung ceramic disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 6 puck configuration, which is a aggressive but manageable for street setup.
The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more streetable than solid or rigid designs. This disc is designed for long life, outstanding holding capacity, and rapid heat dissipation.
The clutch masters fx400 system:
Ultra heavy-duty street & racing system
Holdi...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09
$2,505.33
Make a selection
Highlights:
Made for up to 900°c (1,650°f), for race cars but street legal!
High friction formula improves brake effect 30-40%.
Zero brake fade makes this material perfect for fast driving.
Capable of repeated heavy brake use without brake ?fall-off?.
Very minimal disc/rotor damage characteristics.
Suitable for shorter track events and race use.
Features red ?brake in? Surface coating for instant safe braking after install.
Medium hardness material feels good at pedal.
Work perfectly from cold at least as good or better than stock pads.
Ece r 90 type approved for most cars.
High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade. ...(choose a part on the right to read more)
General Fitment 911 1994-98 968 1992-95 911 1989-94 944 1982-85 944 1985-88 928 1992-95
From $286.73
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|