Vehicles
23 not categorized PORSCHE 914 F MODEL BUMPERCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.10050305502 Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) front bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - includes naca brake cooling ducts. - provisions for turn signals are included. - perfect fitment. - lightweight 9.8 lbs. (4.47 kg) - made of high strength, grp (glass-reinforced plastic) - fits all 911 g-body models* sold individually. 1 necessary per car. * please note: please order the mounting kit, part # 10050305502mk for proper installation. Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead tim...(choose a part on the right to read more) General Fitment911 1970-73
From $1,305.70
Make a selection 10050305502MK Necessary to install part # 10050305502 onto a g-model. Sold as a kit. 1 necessary per car.
$198.00
Make a selection FVD207052 This is meant for g models with 3.0 l rs/ rsr front bumpers. It is ready for installation with oil cooler, oil hoses and mounting brackets. The oil cooler is a high-quality OEM replacement, designed to perform like the original. We source these parts in Germany to ensure quality, reliability and precise fitment. Sold as a kit. 1 necessary per car.
$1,887.60
Make a selection
From $26.47
Make a selection 91450506410 Are you tires of your sunburned worn, cracked, damaged, or missing bumper guard? As we all know the factory has long discontinued these but we now offer these newly manufactured replacements made from the highest quality automotive waterproof materials with stainless steel inserts. these are identical to the original factory parts in appearance but should last the life of your 914 due to the superior materials save money by ordering a set. Please see our rear guards as well View/Change Diagram
From $100.70
Make a selection 070121050009BLK The techart grandgt program favors a spectacular performance. The techart-typical exterior design catches the eye of onlookers immediately. The powerful front bumper with integrated splitter and large ventilation intakes, for an improved supply of fresh air to the intercooler and an optimum cooling of the brake system, flawlessly underlines the dynamic contours. Techart-typical: the sporty four-seater's suitability for everyday use. The multifunctional daytime running lights that are integrated in the front bumper give the panamera not only a distinctive appearance. It combines daytime running lights, position lights, parking lights and turn signals as led system unit in a common housing and integrates seamles...(choose a part on the right to read more) General FitmentPANAMERA 2010-14
$51,698.25
Make a selection 070100050009BLK The techart grandgt program favors a spectacular performance. The techart-typical exterior design catches the eye of onlookers immediately. The powerful front bumper with integrated splitter and large ventilation intakes, for an improved supply of fresh air to the intercooler and an optimum cooling of the brake system, flawlessly underlines the dynamic contours. Techart-typical: the sporty four-seater's suitability for everyday use. The multifunctional daytime running lights that are integrated in the front bumper give the panamera not only a distinctive appearance. It combines daytime running lights, position lights, parking lights and turn signals as led system unit in a common housing and integrates seamles...(choose a part on the right to read more) General FitmentPANAMERA 2010-14
$42,592.50
Make a selection 096100050009 Techart widebody conversion kit Porsche 996 coupe 99-04 General Fitment911 1998-05
$30,374.99
Make a selection 996GT2BK9901 Gt2 style body kit Porsche 996 99-01 General Fitment911 1998-05
$3,921.94
Make a selection 070100050009CHR The techart grandgt program favors a spectacular performance. The techart-typical exterior design catches the eye of onlookers immediately. The powerful front bumper with integrated splitter and large ventilation intakes, for an improved supply of fresh air to the intercooler and an optimum cooling of the brake system, flawlessly underlines the dynamic contours. Techart-typical: the sporty four-seater's suitability for everyday use. The multifunctional daytime running lights that are integrated in the front bumper give the panamera not only a distinctive appearance. It combines daytime running lights, position lights, parking lights and turn signals as led system unit in a common housing and integrates seamles...(choose a part on the right to read more) General FitmentPANAMERA 2010-14
$42,592.50
Make a selection 10050305503GFK Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 9.7 lbs. (4.4 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: this only fits in conjunction with widebody / rsr rear fenders, part # FVD503930001 . Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must proper...(choose a part on the right to read more)
$1,265.00
Make a selection 64450524305 This spacer tube is installed at each end of the rear bumper on 356b/c models. The bolt from the fender bracket goes through the spacer and into the end of the bumper. View/Change Diagram
From $9.24
Make a selection 99350501900 This support assists in absorbing impacts and supports the bumper reinforcement bars. High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per bumper. Please note: this fits the front bumper for the 928 models listed on the model fitment tab. It fits the front bumper for the 964 / 965 models and fits the rear bumper of the 993 models listed on the model fitment tab. View/Change Diagram
From $31.90
Make a selection 91150318600 This seal sits on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this is the thinner width. This is not the thicker width from the SC models. View/Change Diagram
From $4.75
Make a selection 91150318601 This seal sits on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. We also recommend purchasing the left side, part # 91150318501 high-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this is the thicker width from the SC models. View/Change Diagram
From $6.16
Make a selection 91150411102 This one-piece seal is closest to the rear bumper, we recommend replacing this when removing the motor for maintenance. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. We recommend replacing both the small and large engine seals, the small is part # 91150411302 sold individually. 1 necessary per car. Please note: this only fits 3.0l 930 turbo models from 1975-77. 930 3.3l models require part # 93050417001 View/Change Diagram
From $45.29
Make a selection 91163125129 The rest of world (row) models came with these fog lights mounted on the rear bumper nearest bumperettes. The fog lights tend to suffer from oxidation, scratches, chipping and cracking. Replace yours with this high-quality hella OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. Please note: does not include bulb or electrical connections. Please purchase bulb part # 90063112790 separately. We also recommend replacing the mounting bracket as it tends to suffer from corosion, part # 91163112502 please check the model fitment tab to ensure accurate fitment. View/Change Diagram
From $78.99
Make a selection 91150318500 This seal sits on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this is the thinner width. This is not the thicker width from the SC models. View/Change Diagram
From $5.25
Make a selection 64450524705 On 356b/c models the rear bumper ends are bolted through the body into the fender brace. This support plate backs up against the body on the inside. One piece is required on each side. View/Change Diagram
From $6.16
Make a selection FVD505981SCH Motorsport quality grp (glass-reinforced plastic) front bumper, specifically produced for the early 911 style headlights up to 2001. This will fit all 986 Boxster models however. - produced by a German motorsport manufacturer. - provisions for turn signals are included. - lightweight - made of high strength, grp (glass-reinforced plastic) - includes a sheet of black race mesh for the radiator inlets. Please note: this is a motorsport part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint. They require pre-fitment, filling, sanding, primer and paint...(choose a part on the right to read more)
$1,381.37
Make a selection FVD50501901 When installing a lightweight bumper or bumper bar for racing use, you want to remove as much weight as possible. Don't forget to remove your heavy factory supports. This is a lightweight aluminum alternative, made in Germany. Weighs: 140 grams / .13 kilograms / .3 lbs. Sold individually. Please note: please check the model fitment tab to ensure accurate fitment.
$141.90
Make a selection BES99115000SKR + 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 18 lb. (8.5 kg)weight savings over OEM center muffler. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - replaces OEM center muffler and connects to OEM header and OEM side mufflers and OEM tips. Please note: this muffler is a direct replacement the 991 Carrera s (3.8l - us model) which comes standard with valves. It is also a direct replacement for the Porsche sport exhaust option. This center muffler bypass for the 991 is one of the most technically advanced for Porsche t...(choose a part on the right to read more)
$3,713.60
Make a selection FVD500911RSR Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) body kit that includes every detail for a perfect fit. This kit is not motorsports quality, it is OEM quality that sets it apart from the competition. Each part includes all the correct mounting cut outs, pre-drilled holes and fits like an OEM part for a perfect street car appearance. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight - made of high strength, grp (glass-reinforced plastic) kit contains: qty. 1 front bumper with spoiler, part # 10050305502 qty. 1 front bumper mounting kit, part # 10050305502mk qty. 1 rear bumper, part # 10050305503gf...(choose a part on the right to read more) General Fitment911 1970-73
From $9,222.99
Make a selection FBRF996 Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well. General FitmentBOXSTER 1997-04911 1998-05
$4,055.52
Make a selection FBRC996 Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well. General FitmentBOXSTER 1997-04911 1998-05
$5,600.73
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |