Vehicles
73 not categorized PORSCHE 964 S SEAT COVERSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.91155507860700R01 Genuine part sourced in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Like new
$150.00
Make a selection FVD347930SW1 This kit includes everything needed to recover your original 4 spoke steering wheel from the factory. The kit includes precut leather, needle and stitching thread. Sold individually. Please note: other colors are available on request. Please contact us for further details.
$237.60
Make a selection 91152138102 View/Change Diagram
From $54.50
Make a selection
$11.50
Make a selection 96410622903 This cover sits above the heat shield 96411901503 on the left side of the engine. If you are removing the motor for maintenance be sure to check and replace the engine covers / heat shields as necessary. Sold individually. 1 necessary per car. View/Change Diagram
From $245.30
Make a selection DA69P Most, if not all track prepared 964/993 cars will have their air bags removed to save weight and to avoid being deployed if the inevitable were to happen. Factory air bag covers are very valuable, and should not be left in these cars to become victims of the less than gentle treatment that track cars receive. Rennline’s airbag delete panel is a lightweight aluminum panel that is formed to the exact shape and size of the factory padded air bag cover but weighs 2/3rds less. Available in textured black powder coat to match the existing factory dash and uses all factory air bag cover hardware. General Fitment911 1989-94911 1994-98
$95.00
Make a selection 96410628901 This cover sits above the heat shield 96411901403 on the right side of the engine. If you are removing the motor for maintenance be sure to check and replace the engine covers / heat shields as necessary. Sold individually. 1 necessary per car. View/Change Diagram
From $315.70
Make a selection 44404480060031 High quality polished carbon handbrake tray. This is a carbon overlay, meant to be adhered to your original plastic tray. We recommend adhering the carbon overlay to your original with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon overlay to be adhered to the original black plastic piece, part # 964 552 539 00 for reference. Please note: if you would like a handbrake tray that is ready for installation, please purchase part # 444 044 800 6003. Sold indiv...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $417.60
Make a selection 96410601402EQ This OEM cover sits low nearest the rear bumper. If you are removing the motor for maintenance, be sure to check and replace the engine covers / heat shields as necessary. We recommend purchasing a new seal, part # 96410622301 and plug, part # 96410623701 to complete the installation. Sold individually. 1 necessary per car.
$601.70
Make a selection DA69 Most, if not all track prepared 964/993 cars will have their air bags removed to save weight and to avoid being deployed if the inevitable were to happen. Factory air bag covers are very valuable, and should not be left in these cars to become victims of the less than gentle treatment that track cars receive. Rennline’s airbag delete panel is a lightweight aluminum panel that is formed to the exact shape and size of the factory padded air bag cover but weighs 2/3rds less. Available in textured black powder coat to match the existing factory dash and uses all factory air bag cover hardware. General Fitment911 1989-94911 1994-98
$152.90
Make a selection FVD55246500 High quality polished carbon dash trim piece. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon replacement for original # 964 552 465 00 01c. Sold individually.
$133.10
Make a selection FVD55259100 High quality polished carbon dash trim piece. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon replacement for original # 964 552 231 01 01c. Sold individually.
$81.40
Make a selection FVD55259200 High quality polished carbon dash trim piece. Great detail is taken to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon replacement for original # 964 552 232 01 01c. Sold individually.
$81.40
Make a selection FSPOR964RSRWOH Product details: General Fitment911 1989-94
From $2,595.00
Make a selection FVD55246600 High quality polished carbon dash trim piece. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon replacement for original # 964 552 466 00 01c. Sold individually.
$133.10
Make a selection FSPOR964ABX Direct bolt-on replacement for the factory air box providing increased airflow and power. Made from anodized gold t6061 aluminum. The gold color mimics the yellow zinc plated OEM hardware that Porsche used in all their air-cooled cars from this era. General Fitment911 1989-94
From $196.43
Make a selection 00004320201 These car covers feature the Porsche crest and logo in red, and are made from a special silver 100% polyester material that is water-resistant and breathable to protect against fading of paint and interior fabrics. The bottom edge is fully elasticized with reinforced plastic tie-down grommets on each side. View/Change Diagram
$437.95
Make a selection 00004320202 These car covers feature the Porsche crest and logo in red, and are made from a special silver 100% polyester material that is water-resistant and breathable to protect against fading of paint and interior fabrics. The bottom edge is fully elasticized with reinforced plastic tie-down grommets on each side. View/Change Diagram
$437.95
Make a selection 44404480060011 High quality polished switch cover. This is a carbon overlay, meant to be adhered to your original plastic switch cover. We recommend adhering the carbon overlay to your original with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. We also recommend replacing your missing or broken switch cover clips, part # 94455255700. 2 are needed per switch cover.
$535.70
Make a selection 4440448006005AK High quality polished switch cover. Send us your original cover and we will install the carbon for you. We do not offer a core exchange on this part. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Please note: knob is not included. It is not necessary for you to send us your knob. Sold individually. We also recommend replacing your missing or broken switch cover clips, part # 94455255700. 2 are needed per switch cover. If you would also like to replace the knob, use part # FVD33399603b8
$553.41
Make a selection 44404480060041 High quality polished lower switch cover. This is a carbon overlay, meant to be adhered to your original plastic lower switch cover. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. We also recommend replacing your missing or broken switch cover clips, part # 94455255700. 2 are needed per switch cover. If you would also like to replace your knobs, use part # FVD33399603b8
$514.80
Make a selection 36906119 Cover plate, flywheel end of engine. Fits all 356 with usa style heater. All 356 & 912 engine sheet metal should be painted black. The fan shrouds, however, were painted either black, silver or gray. As far as we know all 356 normal & 912 engines had black fan shrouds. Early super & super 90 engines had silver fan shrouds, although some very early super 90's had a very light gray, almost white fan shroud. Late super, super 90 & 356c/sc engines had gray fan shrouds. None or this information, however, is written in stone and Porsche has no records of which colors were used for which fan shrouds. View/Change Diagram
$319.00
Make a selection 44455298599RL This set includes a high quality instrument surround, radio cover, ignition cover, and glove box covers. Each piece is a carbon overlay, meant to be adhered to your original plastic trim covers. We recommend adhering the carbon overlays to your originals with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold as a complete set. Please note: this is for cars without air bags!
$3,668.50
Make a selection 444552985041 This is a carbon overlay, meant to be adhered to your original plastic instrument trim. We recommend adhering the carbon overlay to your original with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. This cover is a carbon overlay to be adhered to the original black plastic piece, part # 911 552 549 00 700 for reference. Sold individually.
$768.90
Make a selection 44455598001 High quality polished carbon door handle. Also includes cover factory door handle clips for simple installation. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. General Fitment911 1994-98911 1989-94 911 1970-73
From $246.10
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |