PORSCHE 987 PARTS USEDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 356 1960-65 - Engine (includes uncategorized and accessory items) FVD123014 K-16/24 turbo (up to 555 hp) power is focused on low and mid-range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD Brombacher993 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The process starts with re-profiling the OEM turbocharger compressor housing and m...(choose a part on the right to read more)
$2,976.60
Make a selection FVD3511M19004A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$5,054.50
Make a selection FVD3511N19518A This line is dedicated to the most demanding customers.this braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts. Please remember that in the European community, gran turismo products may only be used in racing and on private roads, unless you have obtained a new approval in compliance with directive 98/12/ec. Proven on-track performance; disperses gasses, cleans pads for better 'bite'; reduces 'usprung weight' for better handling; provides maximum braking force without the flex of sliding callipers; reduces heat-related stress, increases ...(choose a part on the right to read more)
$5,384.50
Make a selection FVD3522P18056A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,064.50
Make a selection FVD3511N29518A This line is dedicated to the most demanding customers.this braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts. Please remember that in the European community, gran turismo products may only be used in racing and on private roads, unless you have obtained a new approval in compliance with directive 98/12/ec. Proven on-track performance; disperses gasses, cleans pads for better 'bite'; reduces 'usprung weight' for better handling; provides maximum braking force without the flex of sliding callipers; reduces heat-related stress, increases ...(choose a part on the right to read more)
$5,384.50
Make a selection FVD3511N29523A This line is dedicated to the most demanding customers.this braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts. Please remember that in the European community, gran turismo products may only be used in racing and on private roads, unless you have obtained a new approval in compliance with directive 98/12/ec. Proven on-track performance; disperses gasses, cleans pads for better 'bite'; reduces 'usprung weight' for better handling; provides maximum braking force without the flex of sliding callipers; reduces heat-related stress, increases ...(choose a part on the right to read more)
$5,384.50
Make a selection FVD511RSKIT This manual support replaces the OEM hood shocks to save weight. It can be used on kevlar / gfk / aluminum hoods. The kit is comprised of genuine parts and was originally manufactured for the rennsport models. Weighs: .12 kg (.26 lbs.) sold individually. 1 necessary per car.
$100.10
Make a selection FVD631601B Update the look of your car to a brighter and more modern look. This bulb emits a brilliant blue-white light which also enhances safety on our older cars. This bulb is intended for fog or corner lighting. Lighting is a key component of safety. Be sure that your exterior and interior bulbs are in good working order. This bulb can be used as an alternative to part # 90063112690 sold individually.
$23.10
Make a selection FVD123014ATK K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: larger compressor wheel with extended tip. 47.5mm inducer diameter. Cnc modified compressor housing modified and improved back plane uprated staggered gap turbine uprated thrust bearing modified wheel to reduce backpressure balancing of all components factory vacuum unit new bearings and seals all parts are reconditioned and balanced FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharg...(choose a part on the right to read more)
$2,976.60
Make a selection KEV53100601 Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar / carbon door that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 4 kg (8.81 lbs) - kevlar / carbon - mounting is just like factory, no modifications are necessary. ** does not include the inner protection bar please note: these are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. Hinges are not provided; original hinges must be used. Please let us know the year and model and if you intend to use electric windows and electric...(choose a part on the right to read more)
$3,285.70
Make a selection NLA70101200 Fram side decal-large. 356's & 912's used three types of oil filters. The mann filter was used for the most part on early 356 (or pre "a") and possibly a few very early a's. This filter is identified by a 10mm bolt. The rest of the cars used either the h-filter (which is identified by a 16mm bolt) or the fram filter (which is identified by a 12mm bolt). Since there are no chassis or engine number breaks which denote the use of these filters, it is best to measure the bolt to identify your filter. Also, h-filter canisters are generally either all silver or silver with a black cover while fram canisters are orange with a black cover. General Fitment356 1950-59356 1960-65
$8.80
Make a selection GR2020 Specially formulated to reduce oil consumption and leakage in high mileage cars. The molecular structure of motor oil saver prolongs engine life while reducing smoking caused by worn internal engine parts. As an added bonus, it rejuvenates gaskets and seals. This product should be added with each oil change for maximum benefit and protection. General FitmentACCESSORY
$8.00
Make a selection FVDBRO1016003A Weight savings approximately 4kg (8.8 lbs) of rotating unsprung weight. Oem disk weight 10,8kg (23.8 lbs), brembo disk weight 8.9kg (19.69 lbs) rotors: (13") 330x34mm drilled discs bells / hats: precision milled billet aluminum hardware: brembo floating anti-rattle disc hardware by using an aluminum bell for the hub section of the disc, these rotor assemblies save a great deal of weight. Since this is both rotating and unsprung, it benefits the acceleration, braking, and handling of the vehicle. Secondly, it is better able to handle the large temperature changes that a brake disc experiences. The mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has eng...(choose a part on the right to read more)
$1,815.00
Make a selection PCG90272110 Content: 5x double open-ended wrench (one each: 8x9, 10x11, 12x13, 14x15 and 17x19), 1x wheel nut wrench, 1x special wrench size 36, 1x combination pliers, 1x long screwdriver with holding function, 1x phillips screwdriver, 1x spark plug socket wrench, 1x spark plug ratchet wrench, 1x brass brush, 1x feeler gauge, 1x v-belt, 1x cleaning cloth the decision to develop the tool bag for the 912 was the Porsche classic response to numerous customer enquiries at various Porsche classic events  the experts at Porsche classic are also responsible for the unique appearance of the tool bag, which is characterized by the combination of leather and corduroy this fabric was once used for the central section of the seats...(choose a part on the right to read more)
From $567.74
Make a selection FVD911503185186 This seal kit consists of original part # 911 503 185 00 (left) and 911 503 186 00 (right). The set can be used on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold as a set. 1 set is necessary for front fenders and one set is necessary for the rear. Please note: this is the thinner width. This is not the thicker width from the SC models.
$14.93
Make a selection FVD3511M19007A This line is dedicated to the most demanding customers.this braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts. Please remember that in the European community, gran turismo products may only be used in racing and on private roads, unless you have obtained a new approval in compliance with directive 98/12/ec. Proven on-track performance; disperses gasses, cleans pads for better 'bite'; reduces 'usprung weight' for better handling; provides maximum braking force without the flex of sliding callipers; reduces heat-related stress, increases ...(choose a part on the right to read more)
$5,933.59
Make a selection NLA70100400 H-filter side decal below inlet. 356's & 912's used three types of oil filters. The mann filter was used for the most part on early 356 (or pre "a") and possibly a few very early a's. This filter is identified by a 10mm bolt. The rest of the cars used either the h-filter (which is identified by a 16mm bolt) or the fram filter (which is identified by a 12mm bolt). Since there are no chassis or engine number breaks which denote the use of these filters, it is best to measure the bolt to identify your filter. Also, h-filter canisters are generally either all silver or silver with a black cover while fram canisters are orange with a black cover. General Fitment356 1950-59356 1960-65
$8.80
Make a selection NLA70100900 Fram top cover decal, on the front of the cover in the center. 356's & 912's used three types of oil filters. The mann filter was used for the most part on early 356 (or pre "a") and possibly a few very early a's. This filter is identified by a 10mm bolt. The rest of the cars used either the h-filter (which is identified by a 16mm bolt) or the fram filter (which is identified by a 12mm bolt). Since there are no chassis or engine number breaks which denote the use of these filters, it is best to measure the bolt to identify your filter. Also, h-filter canisters are generally either all silver or silver with a black cover while fram canisters are orange with a black cover. General Fitment356 1960-65356 1950-59
$8.80
Make a selection NLA10890300
$71.50
Make a selection 146096479 Thermo-tec snap straps General FitmentALL
$29.00
Make a selection VDO600847 Snap-in warning lights with 12-v bulbs from vdo. These are used specifically with the 914 aluminum gauge cluster (part number rmb24172), but can be used with all models. General FitmentALL
$21.95
Make a selection VDO600844 Snap-in warning lights with 12-v bulbs from vdo. These are used specifically with the 914 aluminum gauge cluster (part number rmb24172), but can be used with all models. General FitmentALL
$21.95
Make a selection 021101351S Our friends at high performance have come up with a very inexpensive way of buying 1.8 heads for your high performance applications. Remachined from commonly available 1.8 heads, these parts will give you 2.0 power at a fraction of the cost of factory 2.0 heads. (and yes, they have 3 stud intakes!) this part requires a core charge, refundable upon receiving your rebuildable head.
$977.50
Make a selection 996424031A Not sold as a separate part this is a good used one
$28.18
Make a selection RES99600164S FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
From $10,370.80
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |