Vehicles
Sections
398 not categorized PORSCHE 993 REAR LEDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 356 1960-65 (includes uncategorized and accessory items) FVD721T254 Special tool designed to support engine during removal of transmission for repair work. Mounts to rear sway bar mount points.
$324.50
Make a selection FVD803993VS0222 High quality, German made three-point replacement safety belt, designed to perform like the original. Features / specs: belt length: 300 cm (118 inches) 3 point inertia reel belt angle adjustable reel (max. Of 8 *) includes 22 cm (8.5 inch) buckle, installation hardware and caps. Din-en-iso 9001: 2000 quality standard manufactured, e-mark approved. The matching rear belt is part # FVD803993hr sold individually. 2 necessary per car.
$162.80
Make a selection FVD58099100 German manufactured bolt in harness bar solution that is less obtrusive than a full roll bar. This harness bar is secured to the rear strut towers with the included high-grade fasteners. Features: seamlessly secured to the rear strut towers allows full front seat range of motion ideal for a lease or to return to the original equipment does not require trimming or cutting any interior parts discreet single belt tube airbag and belt tensioner system remain fully operational chromoly steel tig welded black finish factory seat belts or 4-5-6-point belts can be used. Cost effective for club sport use. Please note: this requires the removal of the rear seat back rests.
$764.50
Make a selection FVDBS352911003 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. Kit contains: 1 qty. Oem set of rear pads (textar), part # 91135295005eq 2 qty. Oem brake warning sensors, part # 94461221105 sold as a set. 1 necessary per car.
$80.30
Make a selection FVDBS352964001 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 4 qty. Oem brake pad damping shims (28 mm piston), part # 99635208602
$206.80
Make a selection FVDBS352965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (34 mm piston), part # 96535209601 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 please note: this is for the European rs only, not for the rs america. This also fits both the 965 3.3l and 3.6l.
$174.90
Make a selection FVDBS352993002 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 1 qty. Oem set of rear pads (4 total) 2 qty. Oem brake warning sensor 8 qty. Oem brake pad damping plate (for 28 mm piston) please note: this kit does not contain brake discs!
$240.90
Make a selection FVD911503185186 This seal kit consists of original part # 911 503 185 00 (left) and 911 503 186 00 (right). The set can be used on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold as a set. 1 set is necessary for front fenders and one set is necessary for the rear. Please note: this is the thinner width. This is not the thicker width from the SC models.
$14.93
Make a selection FVDBSK352911002 If you are experiencing a pulsation and hearing grinding sounds when braking, odds are your rotors need to be replaced to restore full stopping power. Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. The rotors are an OEM replacement (for original # 901 352 041 14), manufactured by zimmermann in Germany. They are internally vented and z-coated for corrosion resistance. Features: anti corrosion "z-coating" prevents rust. Simple bolt on, modifications are not necessary. Made in Germany. Kit contains: 2 qty. Zimmermann rear rotors, part # 90135204114eq 1 qty. Textar - OEM set of pads, part # 91135295005eq ...(choose a part on the right to read more)
$222.20
Make a selection FVDBSK352964002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (zimmermann), part # 951 352 041 02eq 1 qty. Oem set of rear pads (4 total), part # 964 352 949 03 4 qty. Oem brake pad damping shims (38 mm piston), part # 996 352 086 02 2 qty. Oem brake warning sensors, part # 964 612 365 02 sold as a kit. 1 necessary per car.
$332.20
Make a selection FVDBSK352970001 Set contains: - brake discs rear left and right - brake pad set - screws for caliper - warning contacts - damping plates
$757.90
Make a selection FVDBSK352993003 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (zimmermann) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 4 qty. Oem brake pad damping plates (for 28 mm piston) 4 qty. Oem brake pad damping plates (for 30 mm piston) sold as a kit. 1 necessary per car.
$508.20
Make a selection FVDBSK352993001 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (zimmermann) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 4 qty. Oem brake pad damping plates (for 34 mm piston) 4 qty. Oem brake pad damping plates (for 30 mm piston) sold as a kit. 1 necessary per car.
$477.40
Make a selection FVDCHR21052117B Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,381.60
Make a selection FVDBSK352965002 Make your next brake service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Front rotors (genuine), part # 96535204100 & 96535204200 1 qty. Oem set of rear pads (4 total), part # 96535293904 2 qty. Oem brake warning sensors, part # 96461236502 4 qty. Oem brake pad damping shims (34 mm piston), part # 96535209601 4 qty. Oem brake pad damping shims (30 mm piston), part # 99635208600 please note: this kit fits both the 965 3.3l and 3.6l.
$1,475.10
Make a selection PLE54109900SEGR Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Includes right and left rear quarter windows and the rear windshield. Does not include the seals.
$2,087.80
Make a selection HEI981001001S Heigo motorsports has been building extremely safe roll cages and roll bars for Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. Chromoly steel 1.5 inch diameter tubing, .098 wall thickness tubing. A true bolt in bar that does not require drilling or welding. Includes a harness bar which is located on the b-pillar hoop. Bars which connect to the main hoop, use a connecting joint system so that you can easily access the motor without the use of tools. Tig welded. Retains full seat adjustability. Factory seat belts or 5-6 point belts can be used. Semi-gloss black finish. The front hoop mounts to the upper bulkhead, in the OEM m...(choose a part on the right to read more)
$1,428.90
Make a selection MIT1416 Embossed rear GT spoiler with Porsche on it, easily installed and painted, this one really works to give you down force at high speeds
$269.00
Make a selection FVDCHR292124P Long, filigrane spokes and a special small centerpiece give the design of the ch-r its at the same time timeless and dynamic look. The dual execution of the ch-r ii combines in an optimal way, its direct form, for the bestseller with the most modern technology in the motorsport industry. Two-part wheel. Laser marking motorsport in the center of the wheel. Exchengeable stainless steel-side guards. Weight optimization through the rear spokes.
$1,309.00
Make a selection RES9970400S For use with Porsche factory cup headers or FVD header (res 997 010 62s cup s header or res 997 010 61s cup header) technical details: 106 db w/o side mufflers material: stainless steel pipe:stainless steel 2 x 76mm (3 ) for cup s stainless steel 2 x 70mm (2.75 ) for cup sound level: fia homologation, does not exceed grandam 106db spec category: racing pipe diameter: tube 76mm (3 ) or tube 70mm (2.75 ) weight silencer: 7.2kg (15.87 lbs) weight rear muffler: 7.6kg (16.76 lbs) delivery contents: 1 x center muffler cup or cup s 2 x connection tubes federation internationale de l'automobile homogolation no.: GT3-015 extensio no.: 05/01 vo group: GT3
From $3,156.04
Make a selection ST5201 The lemans is a classic, handmade, custom seat with a firm support. It comes in leatherette with basket weave. The configurations were used in the recaro sport seat and the Porsche seat and the classic choice for the classic seats. The lemans is currently our lightest seat and is used as a vintage race seat as a bolt in replacement and upgrade for the Porsche 914. Some customers have had the seat installed in the Porsche 904 replicas. Sliders, as well as matching headrests, are standard on all seats. seats sold separately as well as seat brackets for specific cars. General Fitment914 1970-76911 1970-73 911 1965-69 912 1965-69 356 1960-65 356 1950-59
$1,423.50
Make a selection CB20901 The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$399.00
Make a selection CB20801 With the latest in luxury design and its unsurpassed comfort, the all-new legacy is a seat to be reckoned with. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The normal version will fit up to a 38” waist. The wide version is 2” wider and will fit up to a 42” waist. General FitmentALL
$449.00
Make a selection CBS20909W The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$539.00
Make a selection CB20901W The acclaimed cr1 provides drivers of all kinds with the latest in looks, comfort, durability and style. Standard features include: high-density injection molded foam, ergonomic design, harness belt capability, integrated shoulder, kidney and thigh support, leatherette high wear patches, and a fully adjustable seat back with a flip forward fingertip controlled lever for rear access. The cr1 is extra aggressive in the kidney area and will fit up to a 36” waist. The wide version (in all colors) will fit up to a 40” waist. Sold each. General FitmentALL
$479.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |