Vehicles
Sections
328 not categorized PORSCHE 997 EMOCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1965-69 (includes uncategorized and accessory items) 91173103161 Finally a top quality sunvisor for the 911 that you will be proud to display at the next concours competition! an accurate reproduction of the early, late, or targa cars complete with the expensive sunvisor clip as well. we were very happy to contract with a firm overseas to produce an exact match to the original sunvisors installed in your early 911 912 and targa. as you know all have been superseded to the expensive non matching 964 model visors! (what was Porsche thinking?) now for a fraction of the price you can have exact match new visors, complete with clips that you will be proud of installing, and the concours judges will not remove points! View/Change Diagram
$158.47
Make a selection 91150411302EQ This one-piece seal is furthest from the rear bumper, we recommend replacing this when removing the motor for maintenance. We recommend replacing both the small and large engine seals, the large is part # 91150411102 sold individually. 1 necessary per car.
$16.50
Make a selection 911603118X With internal regulator.(paris rhone) General Fitment911 1965-69911 1970-73 911 1974-77
From $302.40
Make a selection FVD33150001 Solid bushings and mounts allow you to achieve exact suspension articulation which improves handling and stability on lowered / race prepared cars. The original soft rubber bushings can deform under track loads which allows the sub frame to shift and throw the camber and toe off. Solid bushings will not deform and will keep the camber and toe settings in line which equates to confidence in cornering and faster lap times. These are intended to replace the soft rubber bushings on the original rear sub frame (part #'s 993 331 051 00 & 993 331 052 00). They are made in Germany and are TUV approved. Sold as a set. 1 set is necessary per car. Please note: if you are also driving your car on the street, they will res...(choose a part on the right to read more)
$243.10
Make a selection FVD10397517 Carrillo is one of the most respected connecting rod manufacturers in competitive motor sports. Carrillo rods are constructed from their propriety alloy and forged to their custom specifications. The rods are then fully machined to guarantee the removal of all surface imperfections. After heat treatment, each connecting rod is magnaflux inspected and hardness checked, then machined to final size. Each set is balanced and then shot-peened to achieve the ultimate in strength and fatigue properties.
$2,434.30
Make a selection 91173103217CA9 Finally a top quality sunvisor for the 911 that you will be proud to display at the next concours competition! an accurate reproduction of the early, late, or targa cars complete with the expensive sunvisor clip as well. we were very happy to contract with a firm overseas to produce an exact match to the original sunvisors installed in your early 911 912 and targa. as you know all have been superseded to the expensive non matching 964 model visors! (what was Porsche thinking?) now for a fraction of the price you can have exact match new visors, complete with clips that you will be proud of installing, and the concours judges will not remove points! View/Change Diagram
$158.47
Make a selection 90154390220 Necessary when replacing your right rear quarter window. This seal retains the window in the body and prevents moisture from getting in. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 needed per car. View/Change Diagram
From $30.80
Make a selection 91131802900 If your speedometer completely fails look at the angle drive first before suspecting the cable. easily checked by disconnecting the speedometer cable then lifting the car and putting it in gear to see if the angle drive spins, the part is easily replaced. always try to buy a new one as this is a wear part. purchase a speedo angle drive seal at the same time to stop the transmission fluid leak. it fits on the drive gear in the rear tail cover and is easily removed with the rear 13 mm headed set screw. You will have a fluid spill when this is removed so get ready! Refill with 80/90 weight oil only. View/Change Diagram
From $52.47
Make a selection 90164163200 Known as: remote temperature sensor View/Change Diagram
From $50.99
Make a selection 24135191101RS Highlights: made for up to 750*c (1,382*f) fsome track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from...(choose a part on the right to read more)
$169.40
Make a selection 61610220401 Flywheel, 200mm. If you resurface your 912 flywheel, put a steel washer of the same thickness as the material removed under the release fork pivot ball to insure proper clutch operation. View/Change Diagram
From $476.12
Make a selection 24135299702RS Tired of having to wash the car just due to brake dust build up? Ebc redstuff brake pads have you covered. They reduce brake dust by 60-90%, plus the minimal dust is safely removed with a wet sponge as redstuff does not contain steel fiber particles found in other pads. These pads also have excellent brake friction when cold and just get better as they warm up. The pads are composed of a kevlar fiber-based brake compound enhanced with ceramic particles. The benefits of this material are longevity, enhanced braking performance, quiet operation and reduced brake dust. Features: made for up to 750*c (1,382*f) for street, track and rally use. Low dust, high performance street pad with 20-25% braking improvement. Ca...(choose a part on the right to read more)
$261.80
Make a selection 846R9003 Material: tig welded, type 304, stainless steel. Finish: satin finish stainless. Weight: 6oz. Models: 996/997, Boxster, 911 & 944. Installation: secures snap-in lap belts to outside seat belt mounting point. Miscellaneous: allows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats. Use part 846r-9001 for inside belt mount.
$112.20
Make a selection 3MPOL1669 3m perfect-it ultrafine machine polish is a professional OEM finishing polish that delivers flawless results on all paints. Designed for rotary use only, 3M perfect-it ultrafine machine polish is what the pros use to put the finishing touch on new finishes. Ultra fine abrasives remove imperfections and leave a flawless, perfect finish General FitmentACCESSORY
$66.95
Make a selection 846R9001R01 Material: tig welded, type 304, stainless steel. Finish: satin finish stainless. Weight: 6oz. Models: 996/997, Boxster, 911 & 944. Installation: secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point. Miscellaneous: allows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats. Note: part# 846 r9002 hardware kit is required for installation in (1985 - 1989) model Porsches. Use part 846 r9003 for outside belt mount.
$69.30
Make a selection 113311113B If you are wondering about the transmission dope leak in between the engine and the transmission it is the front main seal. easily replaced with the transmission removed with a small seal puller, the new part does not have the additional lip of the old originally installed part. View/Change Diagram
From $2.25
Make a selection 115900944020CS Double spring suspension (racing) for 924 only for 20mm spring strut mounting this sport suspension was tuned and tested for racing use only (hockenheimring.net). Perfect handling, recommended for race and clubsport. Not for street use (racing suspension). The lowering is adjustable (30-70mm front and 30-60mm rear). By using springs at the rear axle instead of torsion bars you improve extreme the handling of your car. By removing the rear torsion bars is the weight saving approximately 25kg.
$2,633.40
Make a selection
$163.71
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |