PORSCHE 930 REAR PORSCHECan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1984-86 - Fuel/Exhaust (includes uncategorized and accessory items) FVD35298001 Brembo direct replacement 2-piece rear rotors for the '04-'06 Porsche Carrera GT designed to be used with the vehicles OEM brake calipers. These include brembo's high thermal type iii rotors , billet aluminum bells, and anti-rattle floating hardware. The floating disc mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly.
$2,832.54
Make a selection WAP94200M19 Two patch pockets with zips and two pockets on the front. Pleated back for greater freedom of movement and stretch panels on the waistband for optimum comfort. Martini racing Porsche logo embossed on the rear yoke. Lining with pockets. Two-way zip. Discre. General FitmentACCESSORY
$961.53
Make a selection WAP94200S19 Two patch pockets with zips and two pockets on the front. Pleated back for greater freedom of movement and stretch panels on the waistband for optimum comfort. Martini racing Porsche logo embossed on the rear yoke. Lining with pockets. Two-way zip. Discre. General FitmentACCESSORY
$961.53
Make a selection 992CAT With over 25+ years of Porsche air and water-cooled experience, fabspeed motorsport usa offers a great enhancement for your stock exhaust or aftermarket exhaust on your Porsche 992 Carrera. Using only the highest quality helical valves imported directly from the u.k., our system eliminates any risk of failing exhaust valves. Helical limited in great britain supplies the world's very best exhaust valves to Porsche, ferrari, lamborghini, mclaren, aston martin, and other hypercar manufacturers. Other cheap aftermarket exhaust valves are not able to handle the heat produced by a rear or mid-engine car and are guaranteed to fail, break and rattle. Helical u.k. Imported exhaust valves are bullet-proof and never fai...(choose a part on the right to read more)
$5,245.95
Make a selection AP958170 Agency power is proud to release its super sport exhaust system for the 958 Porsche Cayenne s v8 2011 and up. the super sport exhaust is a axle system that gives your 4.8l v8 engine a real aggressive tone. made here in the usa, the exhaust saves close to 30lbs off the rear end of the vehicle. using 304 stainless steel and detail oriented tig welding, the exhaust system uses two small high flow mufflers which give it the sports car rumble. its reduced back pressure design gives the engine improved horsepower and torque with most noticeable improvement in throttle response. because of the reduced restriction, this exhaust horsepower gains can definitely be noticed in the mid to top rpm range.
$1,495.95
Make a selection 911563051002EQ This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a pvc plastic rear window like the original. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion; increased fade resistance and the tighter woven layers are made for stronger frames. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. This would replace original part # 911 563 051 00 2xw made in Germany. Sold individually. 1 necessary per car.
$1,992.10
Make a selection 91163194000EQ If you are restoring or replacing a rear taillight, you may want to consider this. It is a lightweight, high-quality OEM replacement, designed to perform like the original. Perfect for a race application, or for a lightweight street car. Quality replacement part manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. Passenger's side fitment. 1 necessary per car.
$320.10
Make a selection AP9972TT170 The stock exhaust of the Porsche 997.2 turbo is very restrictive compared to aftermarket systems. Porsche does this to meet sound and emission purposes like most OEM manufacturers. agency power set out to create an exhaust system for the new Porsche 997.2 turbo 6speed or pdk that did not drone, would produced amazing performance, and under throttle give an incredible sound. we have accomplished this! the new agency power exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit.
$3,749.95
Make a selection 115900991BI02 This bilstein b16 damptronic active coil over suspension kit features ride height and damping adjustability that is compatible with the Porsche pasm electronic damping system. The damptronic system constantly monitors the road surface via sensors, so the vehicle adjusts for perfect traction, unparalleled control and stable handling. Each active Porsche electronic suspension feature, control and setting is retained and all function in the same manner. The front and rear progressive rate springs are matched with bilstein's famous monotube performance dampers. This suspension is custom tuned for the 991.1 and 991.2 variants. The front and rear threaded damper bodies allow .8 - 1.5 inches (20-40 mm) of travel whic...(choose a part on the right to read more)
$5,197.50
Make a selection 115900991BI01 This bilstein b16 damptronic active coil over suspension kit features ride height and damping adjustability that is compatible with the Porsche pasm electronic damping system. The damptronic system constantly monitors the road surface via sensors, so the vehicle adjusts for perfect traction, unparalleled control and stable handling. Each active Porsche electronic suspension feature, control and setting is retained and all function in the same manner. The front and rear progressive rate springs are matched with bilstein's famous monotube performance dampers. This suspension is custom tuned for the 991.1 and 991.2 variants. The front and rear threaded damper bodies allow .8 - 1.5 inches (20-40 mm) of travel whic...(choose a part on the right to read more)
$4,813.60
Make a selection FVD50599102MM The moshammer evo 2 front chin spoiler blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce. Porsche active aerodynamics remains fully functional in all 3 positions and the evo 2 chin spoiler secures seamlessly into the factory locations. The evo 2 spoiler's design offers a more aggressive look but also blends perfectly with other design elements like the side skirts and rear spoiler. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs...(choose a part on the right to read more)
$1,386.00
Make a selection 10050305503GFK Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 9.7 lbs. (4.4 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: this only fits in conjunction with widebody / rsr rear fenders, part # FVD503930001 . Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must proper...(choose a part on the right to read more)
$1,265.00
Make a selection BES99716000S1 Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs i...(choose a part on the right to read more)
$851.40
Make a selection FVD33150003 Rear toe control arms - order in pairs only restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can't compensate enough when lowering your Porsche, leaving you stuck with as much as ½ of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.
$218.90
Make a selection BES99126010SOL Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$660.00
Make a selection BES99126010S Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$600.60
Make a selection FVD35199623B Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increase safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. FVD BrombacherGermany conveniently combines Porsche specific h&r spacers, the correct Porsche bolt shoulders and the correct length h&r bolts to take the guess work out of adding spacers to your car. Our spacers are cost competitive and have been developed to work together without compromise. Don't be fooled by the competition whose costs quickly add up by requiring you to order the spacers...(choose a part on the right to read more)
$118.80
Make a selection WAP942XXL19 Two patch pockets with zips and two pockets on the front. Pleated back for greater freedom of movement and stretch panels on the waistband for optimum comfort. Martini racing Porsche logo embossed on the rear yoke. Lining with pockets. Two-way zip. Discre. General FitmentACCESSORY
$961.53
Make a selection FVD33300905 This rear spring plate is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. New rs spec. (85 shore) rubber bushings are installed to make this a direct bolt on. 85 shore rubber is more durable than OEM 65 shore and provides more positive suspension location yet is still quiet and compliant for street use. Features: made from ¼ inch spring steel includes new rs spec. (85 shore) rubber bushings made in Germany sold individually. 2 necessary per car.
$273.90
Make a selection FVD35199611Z Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increase safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. FVD BrombacherGermany conveniently combines Porsche specific h&r spacers, the correct Porsche bolt shoulders and the correct length h&r bolts to take the guess work out of adding spacers to your car. Our spacers are cost competitive and have been developed to work together without compromise. Don't be fooled by the competition whose costs quickly add up by requiring you to order the spacers...(choose a part on the right to read more)
$76.99
Make a selection E19208 Rennline's stainless steel folding race hook install in minutes on any Porsche with factory screw type removable tow hook. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", rennline's stainless steel tow hook is a precision machined and will stand up to the extreme abuse seen in any race environment. With a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a hook that are highly visible and h...(choose a part on the right to read more)
$152.90
Make a selection FVD631403US Update or complete the look of your car with a set of clear turn signal lenses. These replace the original amber lens, part # 91163191400 and include us dual filament bulbs. We recommend replacing the rear lenses as well to the red / clear lenses, part # 91163195100eq and 91163195200eq . Quality tuning product manufactured by dansk. They offer a complete line of tuning and performance parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold as a set. Passenger's and driver's ...(choose a part on the right to read more)
$128.69
Make a selection HEI981001001S Heigo motorsports has been building extremely safe roll cages and roll bars for Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. Chromoly steel 1.5 inch diameter tubing, .098 wall thickness tubing. A true bolt in bar that does not require drilling or welding. Includes a harness bar which is located on the b-pillar hoop. Bars which connect to the main hoop, use a connecting joint system so that you can easily access the motor without the use of tools. Tig welded. Retains full seat adjustability. Factory seat belts or 5-6 point belts can be used. Semi-gloss black finish. The front hoop mounts to the upper bulkhead, in the OEM m...(choose a part on the right to read more)
$1,428.90
Make a selection FVDBSK352993004 Make your next service a breeze with our pre-packaged service kits. Quality means everything to us, so we only source these parts directly in Germany. This kit contains: 2 qty. Rear rotors (original Porsche) 1 qty. Oem set of pads (4 total) 2 qty. Oem brake warning sensors 8 qty. Oem brake pad damping plates (for 28 mm piston)
$984.50
Make a selection WAP0407120A Fold-out stick in the same design as the Porsche sports car vehicle key. Porsche crest on the front. Led control light on the rear. The plug direction depends on the usb port being used. It can store up to 4 gb of data and is compatible with various operating systems including the Porsche communication management system with the individual universal audio interface option. In black with chrome. Dimensions: 53.5 x 38 x 19.5 mm General FitmentACCESSORY
$64.90
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |