PORSCHE 356 C EXHAUST CATCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1984-86 - Transmission (includes uncategorized and accessory items) BES99710200SKGT - equal length headers with long tube design - 200 cell German hjs hf sport catalysts with u torque design - 2 3/4 tubing (70mm) - rsr style connections and quick release clamps - quad 3.5 (90mm) round tips - made in Germany -+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. - weighs 62 lbs.(28,0 kg). Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany. Performance gains (includes FVD software, sport airfilter and exhaust):, based on the 3.8 l: max. Power - 283kw (385hp) @ 6500rpm max. Torque - 441nm (325lbf ft) @ 4000rpm max. Speed - 307km/h max. Rpm - 7900rpm acceleration 0-100km/h - 4.4s our Brombachersystem uses 2 ¾ inch (70mm) tubing and is modula...(choose a part on the right to read more)
$9,220.20
Make a selection BES99709060SRS
$4,182.20
Make a selection BES99120220SK
$7,925.50
Make a selection FVD11196415GKT This installation kit is needed to install our part numbers FVD 111 964 15 or FVD 111 964 17. Sold as a set. 1 necessary per car.
$42.90
Make a selection RES96400000S1
$5,674.90
Make a selection RES96400100S1 More low and mid-range torque than our race system with cat bypass. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of dual exhaust tips! + 25 hp & + 23 torque - 100 cell hjs tri-metallic race catalytics. -2 1/2 tubing (63.5mm) for max. Power across the rpm range.* -weighs 49 lbs. (22 kg). -German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - aeroquip cone style catalytic connection design to prevent exhaust leaks. -includes aeroquip quick release clamps. -made in Germany by m&m exhaust, gmbh. -dual round 3 exhaust tips -intoxicating flat 6 growl at idle, partial throttle and wide open throttle. P...(choose a part on the right to read more)
$7,403.00
Make a selection RES9111000ST
$5,338.30
Make a selection RES99620010S Complete race exhaust system for 996 Carrera - up to 26kw (35 hp) more power - no side muffler - weight reduction - complete system weight only 36lbs (16.5 kg) dme programming necessary. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$4,492.40
Make a selection FVD21132848942
$4,349.71
Make a selection RES99710060S76 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$5,503.30
Make a selection RES98100000S A track favorite due to its performance gains and reliability. + 30 hp & + 25 tq gain. - catalytic bypass for track use. - weighs 59 lbs. (27,0 kg), OEM weighs 84 lbs. (38kg). - motorsport merge collector. - intoxicating growl at idle, partial throttle and wide open throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - "aero quip" style motorsport muffler connections with a single gasket and flange at the header to ensure a leak free exhaust. - ecu programming (software) is necessary. The FVD Brombacherfull race exhaust system for the 981 and is one of the most technically advanced systems for Porsche to date. Our entire "brombacher" line of exhausts is manufactured to ou...(choose a part on the right to read more)
$5,710.10
Make a selection RES96410100S
$6,993.80
Make a selection RES99700060S1 Race exhaust system 997.1 GT3 cup / s - made for 3.8 l motors. Stainless steel. - header diameter 50mm - tube diameter 76mm after the headers - recommended for engines 450hp+ (3.8 l motors) all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions. Please note: this system will also fit 997.1 GT3 cup cars with 3.8 l conversions.
$6,226.00
Make a selection RES99700060SGA3 Race exhaust system 997 GT3 cup (2010+ 3.8 l), stainless steel. - tube diameter 90mm after the headers all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$6,931.10
Make a selection RES99700062S1
$7,750.60
Make a selection RESMK911001 This kit is necessary when installing any of our racing / street exhaust systems manufactured by m&m exhaust gmbh whose part number begins with res 911 or bes 911 kit contains: - modified oil lines - straps - header / heat exchanger gaskets
$378.81
Make a selection 21011124OK Catalytic bypass pipe "u-torque" design, manufactured by m&m in Germany. The u-torque design compensates for the backpressure loss while running without cats. The design minimizes the loss of low end torque and adds 10-15 ft-lbs of torque in the mid and top range of the rpms. Why settle for the traditional cross over cat design when you can add torque in the mid-range and minimize the loss of torque down low where the 997's need it most! Ecu software is necessary !
$1,094.50
Make a selection 90002500703 Known as: washer 8.4 / washer for ground strap 20 x 8.4 x 2 / washer a 8.4 / washer b 8.4 / washer a 6.4 / washer m 8.4 / washer a8.4 View/Change Diagram
From $0.79
Make a selection BES99726000SO FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
$894.30
Make a selection BES99725060SR Brombacher sport muffler for 997.2 GT3 / rs (sound version) with rsr style tips facts: - + 10 crank hp & + 10 crank torque - 2 3/4 tubing (70mm) straight through design for max. Power - weighs 28 lbs. (12.7 kg) - replaces stock side mufflers and stock center muffler - 36 lbs (16.3 kg) savings over stock system! - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - 2 x 3.5 (90mm) rsr angle cut tips - includes all necessary clamps and mounting brackets - made in Germany - 105 db - intoxicating cup car growl at idle, partial throttle and wide open throttle - no interior resonance - no dme programming necessary, does not alter emissions, 50 state legal in the u.s. For reference: 997 GT3 OEM ...(choose a part on the right to read more)
$3,023.90
Make a selection BES97003040S M&m exhaust develops and produces exhaust pipes, catalysts and complete exhaust systems for street and race exotic and sports cars. m&m exhaust specifically concentrates on maintaining original equipment levels of fitment and finish.
$2,919.40
Make a selection BES99105060S - + 12 crank hp & + 12 crank torque - 2 3/4 tubing (70mm) straight through design for max. Power - weighs 18 lbs. (8.5 kg), which is a 3 lbs. Savings off of OEM center muffler. - replaces stock side mufflers and stock center muffler. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 2 x 3.5 (90mm) round tips. - includes all necessary clamps and mounting brackets. - made in Germany. - intoxicating cup car growl at idle, partial throttle and wide open throttle. - no dme programming necessary, does not alter emissions, 50 state legal in the u.s. Our 991 GT3 center muffler replacements are vastly different than the baffle plated mufflers stuffed with packing that are common in the after...(choose a part on the right to read more)
$2,337.50
Make a selection BES99729200SHD For 997-2 with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with long tube design - 200 cell hd German hjs tri metal sport cats - 2.5 tubing (63.5 mm) - made in Germany power: - 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm) - 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm) - with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm) our latest development for the 997.2 is aimed at those who are looking for more torque in the mid range, a rich, deep exhaust growl. These headers contain the latest hjs cats, they are nicknamed "hd" for high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat...(choose a part on the right to read more)
$5,036.90
Make a selection BES99107060S The perfect addition for an aggressive exhaust note with the added benefit of reduced weight. Features: 2 1/2 (63.5mm) tubing. Weighs 8.3 lbs. (3,7 kg), 10 + lbs. Savings over stock GT3 center muffler. Made of German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. Fits 991.1 and 991.2 GT3 & GT3 rs models.- reuse's factory tips. Includes all necessary clamps and mounting brackets. Made in Germany by m&m exhaust, gmbh. Intoxicating growl at idle, partial throttle and wide-open throttle. No interior resonance or drone. Ecu software is not necessary. Does not alter emissions, 50 state legal in the u.s. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany. T...(choose a part on the right to read more)
$2,313.30
Make a selection BES97003080S1 M&m exhaust develops and produces exhaust pipes, catalysts and complete exhaust systems for street and race exotic and sports cars. m&m exhaust specifically concentrates on maintaining original equipment levels of fitment and finish.
$1,465.20
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |