Vehicles
Sections
265 not categorized PORSCHE 924 S WARRANTYCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1987-89 (includes uncategorized and accessory items) WAP0354400A Two wheels with ball bearings. Twin-tube telescopic handle made of aluminum. Can be extended twice. Bag holder to attach another bag. Water-repellent, all-around zip. Tsa-approved lock. Black lining featuring the Porsche logo, can be wiped clean. Material: 100% polyester. Two adjustable dividers with inside compartment. Fits in all Porsche models. TUV-tested, five-year warranty. Exterior dimensions: 56 x 45 x 24.2 cm. 51 l volume. Weight: 4.5 kg. General FitmentACCESSORY
$1,276.00
Make a selection 100103034TU Every piston and cylinder is complete and ready to be installed. They are packed as complete set for every engine. Carefully read our technical information before installing the parts. Piston rings and piston pins must not be modified. Modifications of any of these parts will void the manufacturers warranty. General Fitment911 1978-83911 1984-86 911 1987-89 911 1989-94
$8,799.12
Make a selection 10010303204 - 3.2 l for increased horsepower and torque.* - genuine mahle forged pistons with deeper valve pockets. - genuine mahle steel (st52) nikasil coated cylinders.** - piston pin bore is off center (deaxiated) for factory quiet operation. - 10.3:1 compression. - 98 mm big bore. - 22x58 racing wrist pins - 70.4 stroke. - made in Germany by mahle gmbh. - piston rings installed directly on the pistons for ease of installation. - complete set with cylinders, pistons, rings, wrist pins and clips. - kit weighs 21.03 lbs. (9.54 kg). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resista...(choose a part on the right to read more)
$9,693.51
Make a selection 96410440180 Motorsports item. Sold individually. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$22.00
Make a selection FVD98010002 Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)
$17,032.10
Make a selection 10010303303 Every piston and cylinder is complete and ready to be installed. They are packed as complete set for every engine. Carefully read our technical information before installing the parts. Piston rings and piston pins must not be modified. Modifications of any of these parts will void the manufacturers warranty. General Fitment911 1978-83911 1984-86 911 1987-89 911 1989-94 911 1970-73
$6,028.62
Make a selection 86411039S Koni has been in business for 150 years, involved in automobile dampers since 1932 and has produced adjustable telescopic dampers since 1945. A favorite among racers, and offered as a performance option by the factory. Konis are adjustable for fine tuning and carry a lifetime warranty. Koni sport shocks and struts provide a firm, controlled ride and flatter cornering and are also externally adjustable. These dampers can be adjusted, literally at the turn of a knob, a technique borrowed from formula-1 racing where koni dampers have dominated the field for years. Sold each, two needed per vehicle. General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89
$212.50
Make a selection 94410403306CRV Whether you bent all the valves in your 944 when the cam belt broke or you have a 924 that is just tired and needs some top end attention, we can help! Let our expert machine shop take the hassle out of cylinder-head remanufacturing. Install our rebuilt units with confidence. All cylinder heads include new valves, valve guides, valve springs and valve seals (and a 6-month, 6,000-mile warranty).
$992.02
Make a selection 914331055LUG Only rear wheel hubs on the market that allow 5 bolt Porsche wheels to fit onto a 914-4 and retain the stock rear axles. Order 5 studs, r99333167102, per hub. General Fitment911 1987-89914 1970-76
$110.79
Make a selection 911604101AX If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle starting. Eventually you hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter be sure to check the rubber cap on the terminal for cracks which allows moisture in and it is a good idea to check your starters hardware as well. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76 911 1970-73
From $399.59
Make a selection FVD95861880MG Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 309kw (420hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 256km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,0s tuning: max. Power - 325kw (442hp) @ 6000rpm max. Torque - 530nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)
$1,484.16
Make a selection HB171F Hps - high performance street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Hps pads offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have a highly durable brake pad with less brake dust. All hawk performance street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials. General Fitment911 1970-73911 1987-89 911 1984-86 911 1978-83 911 1974-77
$67.95
Make a selection FVD721911RSR Workshop grade center lock wheel socket. - socket insert: 1 inch, sw 90 mm - forged chrome molybdenum steel - length: 105 mm - outside diameter: 120 mm - wall thickness: 10 - 16 mm - weight: 4,050 g with ring groove 2 year dealer warranty.
$206.80
Make a selection FSPOR911TSHDRWH Product details: General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,136.25
Make a selection FSPOR992SC Purchase disclaimer: fabspeed motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 cfr section 86.1854.12(a)(3), clean air act 40 cfr 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.
$3,695.95
Make a selection HB171N Hp plus brake pad compound is ideal for autocross and track day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. Hp plus utilizes a unique ferro-carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, solo ii and “track day” applications. The ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. All hawk hp plus / autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials. General Fitment911 1970-73911 1974-77 911 1978-83 911 1984-86 911 1987-89
$82.95
Make a selection FVD95761891MG Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 298kw (405hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 253km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,1s tuning: max. Power - 312kw (425hp) @ 6000rpm max. Torque - 520nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)
$1,094.50
Make a selection FVD99610061A Kit includes: software genius flash tool, sport air filter genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 331kw (450hp) @ 5700rpm max. Torque - 620nm (457lbf ft) @ 3500-4500rpm max. Speed - 318km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.0s tuning: max. Power - 375kw (510hp) @ 5000rpm max. Torque - 745nm (550lbf ft) @ 4500rpm max. Speed - 328km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
$2,067.23
Make a selection PM1001 Park perfectly in the right spot every time the bright yellow color of the parking mat is an easy target when pulling into the garage. Avoid the tool cabinet or putting bumper marks on the wall. The first bump is a signal to brake the second bump is a signal to stop. Made of a hard, non skid rubber material, it is oil and gas resistant. Lifetime warranty. Sold each. General FitmentACCESSORY
$33.88
Make a selection FSPOR911TMAXDQ Product details: General Fitment930 1975-77911 1978-83 911 1984-86 911 1987-89
From $1,995.00
Make a selection FSPOR911SC Product details: General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89
From $595.00
Make a selection BES99726000SO FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
$894.30
Make a selection FSPOR911RSRWOHT Product details: General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89
From $2,795.00
Make a selection FSPOR911MAXD Product details: General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89
From $1,295.00
Make a selection BES98115001SK This is our jekyll and hyde version ! The perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed. Top of the line or range depending on the english, and is the best choice for a daily driver. + 11 hp & + 10 tq gain. - thermal insulation on piping to keep suspension components cool. Withstands up to 2,012 degrees fahrenheit (1,100 degrees celsius). - 2 1/2 tubing (63.5 mm). - 2 x 3.5 (90 mm) round tips. - intoxicating growl at idle, partial throttle and wide open throttle. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - minimal resonance / drone in the cabin (200 rpms worth) compared t...(choose a part on the right to read more)
$5,197.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |