PORSCHE CAYMAN S TRACK AN ORDERCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1989-94 - Fuel/Exhaust (includes uncategorized and accessory items) FVD3511N29518A This line is dedicated to the most demanding customers.this braking system originates from the racing components, consisting of a ventilated, integral or composite disc, aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts. Please remember that in the European community, gran turismo products may only be used in racing and on private roads, unless you have obtained a new approval in compliance with directive 98/12/ec. Proven on-track performance; disperses gasses, cleans pads for better 'bite'; reduces 'usprung weight' for better handling; provides maximum braking force without the flex of sliding callipers; reduces heat-related stress, increases ...(choose a part on the right to read more)
$5,384.50
Make a selection FVD34101702ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD351997TTCS This kit convert's the 997 turbo pccb rotors to steel rotors with yellow pagid pads.( only 5-hole, not central lock ) this system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 2 x set ( front and rear ) brake pad set (pagid yellow - rs29 ) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
$6,344.80
Make a selection FVD351997GT2CS2 This kit convert's the 997 turbo GT2's / 997gt3 rs pccb rotors to 997 GT3 cup car steel rotors with green cup car pads ( for cars with central lock only ) this system is complete with everything that you need to install. Do not ruin your expensive ceramic brake discs on the track. Get ready for racing with the original and much cheaper Porsche motorsport steel brake discs! What's in the box: 4 x 2-piece brake discs (380 x 34 mm - front / 350 x 28 mm - rear) 4 x wear sensors 8 x cup brake pads (racing green) 8 x screws for brake caliper 8 x damping plates technical tip: also order stainless steel brake lines (FVD b96 355 97) and racebrake fluid (012 145 ca).
$7,260.00
Make a selection PLE54109900SEGR Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Includes right and left rear quarter windows and the rear windshield. Does not include the seals.
$2,087.80
Make a selection FVD3522P29027A Brembo's brake systems are designed to meet the the needs of the most demanding of customers. Brembo brake systems originate from racing components and offer proven on-track performance. Brembo high performance systems offer a significant reducuction in usprung weight for better handling and provides maximum braking force without the flex of sliding callipers. Brembo components reduce heat-related stress and increase brake performance for a better overall pedal feel with less fade. Brake kits come with aggressive pads that last longer than OEM and provide the highest level of performance. Brembo brake systems also consist of a ventilated, integral or composite brake disc, light weight aluminium calipers, steel...(choose a part on the right to read more)
$4,174.50
Make a selection FVD3522P19024A Brembo's brake systems are designed to meet the the needs of the most demanding of customers. Brembo brake systems originate from racing components and offer proven on-track performance. Brembo high performance systems offer a significant reducuction in usprung weight for better handling and provides maximum braking force without the flex of sliding callipers. Brembo components reduce heat-related stress and increase brake performance for a better overall pedal feel with less fade. Brake kits come with aggressive pads that last longer than OEM and provide the highest level of performance. Brembo brake systems also consist of a ventilated, integral or composite brake disc, light weight aluminium calipers, steel...(choose a part on the right to read more)
$4,174.50
Make a selection FVD424049ER If you are using numeric racing performance cables on your race car, then we suggest upgrading your rod ends to these steel ends which will take far more abuse at the track. These are recommended for race cars only as metal on metal contact means increased noise and vibration in the cabin. Sold individually.
$22.00
Make a selection RES99600160S Race exhaust system 996 GT3, stainless steel, 100 cell sport cat with tips facts: - + 25 crank hp & + 19 crank torque - 100 cell catalytic - long tube headers 50 mm diameter primary tubing / 55 mm collector. - "u torque" design tubing style muffler that expands to a 70mm (2.75") diameter. - weighs 36 lbs. (16,4 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - adjustable turn down 70mm (2.75") round tips - cone style connection design to prevent exhaust leaks - includes quick release clamps - made in Germany - dme programming necessary. FVD Brombachersoftware has been developed for this exhaust application. - can be ordered with 50, 200 cell cats. Please ask your FVD sales r...(choose a part on the right to read more)
From $5,888.30
Make a selection FVD3522P38056A2 The brembo gran turismo (gt) braking system with type iii rotors is ideal for ideal for clubsport and sprint type track events. It utilizes brembo type iii aggressive face-type discs that offer high initial response with a smooth pedal feel. The type iii offers the highest overall braking confidence and control, allowing a quick qualifying time or top results in sprint races. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with opposed pistons, a complete set of high-performance brake pads, abrasion and corrosion resistant goodridge braided steel brake lines and high-quality fastener hardware...(choose a part on the right to read more)
$4,064.50
Make a selection FVD3522P29001A Brembo's brake systems are designed to meet the the needs of the most demanding of customers. Brembo brake systems originate from racing components and offer proven on-track performance. Brembo high performance systems offer a significant reducuction in usprung weight for better handling and provides maximum braking force without the flex of sliding callipers. Brembo components reduce heat-related stress and increase brake performance for a better overall pedal feel with less fade. Brake kits come with aggressive pads that last longer than OEM and provide the highest level of performance. Brembo brake systems also consist of a ventilated, integral or composite brake disc, light weight aluminium calipers, steel...(choose a part on the right to read more)
$4,817.77
Make a selection FVD98061891 Genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s FVD software tuning: max. Power - 478kw (650hp) @ 8000rpm max. Torque - 640nm @ 6000rpm max. Speed - 340km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivabi...(choose a part on the right to read more)
$5,494.50
Make a selection FVD72269500LGW This simple FVD Brombachertow hook installs in seconds and folds down to eliminate protrusion from the car's bodywork. It fits all Porsche's with factory left hand thread, screw-type tow hooks. It has a two-inch towing eye, which is required for track events. It is precision cnc machined stainless steel, tig-welded, has a polished shaft and a rubber locking rod to prevent loosening. Features: stainless steel light weight: 1.6 lbs. Fits any Porsche listed in our fits these models tab. Installs in seconds, simply remove the bumper plug and screw into the tow hook hole. Made in Germany. Includes FVD Brombacherlogo. Sold individually.
$137.50
Make a selection FVDB2435500 FVD Brombacherstainless steel brake lines for Porsche are manufactured in europe and are approved for all abs systems. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. They are also coated in a uv resistant pvc jacket to protect the wire and inner hose from the elements, chemicals and abrasion. This construction ensures minimal expansion inside the hose core and eliminates that "spongy" brake feel that is commonly found in the OEM brake lines. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. Our lines are DOT approved by conforming to the fmvss 1...(choose a part on the right to read more)
$158.40
Make a selection FVD72269500 This fold down tow hook installs in seconds and folds down to eliminate protrusion from the car's bodywork. It fits all Porsche's with factory screw-type tow hooks. It has a two-inch towing eye, which is required for track events. It is precision cnc machined stainless steel, tig-welded, has a polished shaft and a rubber locking rod to prevent loosening. Material: stainless steel finish: polished shaft, chrome finished towing eye weight: 1.35 lbs. Models: for any Porsche that comes with a factory screw type tow hook. Installation: installs in seconds, directly into the existing tow hook hole. Miscellaneous: precision cnc machined shaft and tig-welded.
$148.50
Make a selection FVD99610053A Kit includes: sport motronic dme exch., sport air filter, sportmuffler TUV, k24-race turbocharger l/r genuine: engine - 6cyl. Boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 309kw (415hp) @ 6000rpm max. Torque - 560nm (413lbf ft) @ 3500-4500rpm max. Speed - 305km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.2s tuning: max. Power - 397kw (540hp) @ 7000rpm max. Torque - 760nm (561lbf ft) @ 4500rpm max. Speed - 331km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.6s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the...(choose a part on the right to read more)
$15,139.16
Make a selection FVD3522P38056AS The brembo gran turismo s (gt-s) braking system is ideal for clubsport and sprint type track events. The GT-s type iii system utilizes brembo type iii aggressive face type discs that offer high initial response with a smooth pedal feel. The type iii offers the highest overall braking confidence and control, allowing a quick qualifying time or top results in sprint races. Gt-s systems contain advanced calipers that include racing style radiators, dual inner piston seals, an inner pressure seal and an outer wiper seal. This innovative design provides the best combination of performance and long-lasting track use. The calipers are hard anodized in black (machined brembo logo in red) for resistance to corrosion and...(choose a part on the right to read more)
$4,174.50
Make a selection PLE54109500KLS Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Sold individually.
$1,305.70
Make a selection PLE54109900 Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Includes right and left rear quarter windows and the rear windshield. All with seals for a complete installation.
$3,056.90
Make a selection PLE541099001 Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. Made in Germany. Weight: 2.7 kg (5.9 lbs)
$2,013.00
Make a selection RES96400100S FVD "brombacher" sound version exhaust system for 964 89-94 General Fitment911 1989-94
From $7,496.50
Make a selection PLE541099002G Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Includes a frosted black border for a cleaner mounting appearance. Weight: 2.4 kg (5.29 lbs) sold individually. Mounts inside the rubber frame (sold separately), FVD part # FVD11r429gf
$564.30
Make a selection PLE54109500KRS Trying to save weight at the track? These makrolon polycarbonate race windows are very lightweight, strong and durable. They are made in Germany. Sold individually.
$1,305.70
Make a selection RES98720000SS Having to weld up cracks regularly on your current aftermarket racing exhaust? If you are looking for a racing exhaust that can handle abuse at the track, look no further. This exhaust system is manufactured by m&m exhaust, gmbh in Germany. They manufacture a multitude of Porsche motorsport and racing exhausts. Each system is designed for reliability and performance gains throughout the entire rev range. Not to mention, you directly benefit from everything m&m learns at the track, so their systems designs are never static. Also, each system is tested comprehensively for flow characteristics / rate, thermal stress, cracking, and longevity. Features: + 20 hp & + 19 tq catalytic bypass pipes weighs 55 lbs. (23 kg)...(choose a part on the right to read more)
$5,082.00
Make a selection RES99701064S Race headers 997 GT3 rsr, stainless steel - + 10 crank hp & + 8 crank torque - total weight is 14.1 lbs. (6,4 kg) FVD is proud to introduce our newest line of Brombacherrace exhaust systems. Brombacher race exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, this race system meet's the standards of the fia and is registered with them directly. In addition, Brombacherrace exhausts systems are available for ultimate performance full titanium...(choose a part on the right to read more)
From $4,183.30
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |