Vehicles
Sections
289 not categorized PORSCHE 996 OLDS PARTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1989-94 (includes uncategorized and accessory items) 91142308102EQ High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$51.70
Make a selection 91150103902 This is the pillar that buts up to the a-pillar to secure the hinges. It is prime coated and includes the angular bracket. This hinge pillar is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$669.90
Make a selection 24135199702RS Highlights: made for up to 750*c (1,382*f) some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from ...(choose a part on the right to read more)
$299.20
Make a selection 91150195501 Steel, prime coated short forward section floor pan repair panel with suspension mounts made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$409.20
Make a selection 91150301502EQ Headlight buckets are infamous for rusting out as often drain plugs are clogged and trap the water. Replace yours with this dansk made product. Dansk offers a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$167.20
Make a selection 91150403100GRV3 This is a sheet metal repair cup that is located behind the fuel door. It includes the fuel door hinge mount, lock (part # 901 504 034 20grv), buffer (part # 911 025 679 00) and tube for the pull cable. It is manufactured by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment ...(choose a part on the right to read more)
$284.90
Make a selection 91150301605KEV Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar headlight bucket. Features: - produced by an OEM manufacturer. - lightweight .6 lbs. (.3 kg) - made of high strength kevlar. - metal mounting ring is cast inside the bucket for mounting. Sold individually. 1 necessary per car. Please note: requires drilling for wiring, etc. This is a high-quality part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world.
$774.40
Make a selection 91150340105EQ Steel, prime coated outer rocker panel, made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$132.00
Make a selection 91150403100GRV2 This is a sheet metal repair cup that is located behind the fuel door. It includes the fuel door hinge mount, lock (part # 901 504 034 20grv), buffer (part # 911 025 679 00), fuel door (part # 91150403100gr11 ) and tube for the pull cable. It is manufactured by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part ma...(choose a part on the right to read more)
$422.40
Make a selection 91153163100 This is the smaller base gasket for the door handle. When replacing this gasket, we recommend replacing the exterior large door handle gasket, part # 91153163200 and the securing nuts, part # 900 910 008 02 and washers, part # 900 025 003 02. Sold individually. Driver or passenger side fitment. View/Change Diagram
From $5.50
Make a selection 91151101003ALU Quality replacement part for original number, 911 511 010 03 grv. This is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
$2,147.20
Make a selection 91151192302EQ1 This gasket sits on the inside of the hood in the front trunk. It tends to get nicked and cut and will degrade with time. It is essential to keep moisture out of the trunk and should be replaced at the first signs of damage. This is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$136.40
Make a selection 91153127501EQ Whenever you are replacing your old noisy door checks we suggest installing new hardware. This is the bolt that secures the door check. Sold individually. Left of right side fitment. We also recommend new safety clips for the door check bolt, part # 99916600802. 2 qty. Are needed per car.
$6.60
Make a selection 91153170202 As a striker plate ages, it will start to rattle and can potentially be a safety risk. We recommend securing them with new oval head screws, part # 99921900800. 2 screws are needed per plate. We also recommend adding new striker plates gaskets, either 90153170323 or 90153170324 depending on what thickness you need. This line is a high-quality replacement part, sourced in Germany and designed to perform like the original. Sold individually. 1 necessary per car.
From $133.10
Make a selection 91153129640 For 911/930 84-89, 993 94-98 targa / cabrio not for the 964 targa and cabrio. If you would like to order the 964 part, please order part # 90153193620. Sold individually. View/Change Diagram
From $41.00
Make a selection 91153193202 This gasket sits on the outside of the window slot to channel the window glass. It can degrade with time and is essential to keep moisture out of the cabin. We recommend replacing the right and left sides together. When inspecting your window guide gaskets, look to see if your window / door caps are missing and need to be replaced, part # 9997033454001c and 9997033444001c. They commonly get brittle and fall out with time. Sold individually. Passenger side fitment. View/Change Diagram
From $12.10
Make a selection 91153195101 This gasket sits on the inside of the window slot to channel the window glass. It can degrade with time and is essential to keep moisture out of the cabin. We recommend replacing the right and left sides together. When inspecting your window guide gaskets, look to see if your window / door caps are missing and need to be replaced, part # 9997033454001c and 9997033444001c. They commonly get brittle and fall out with time. Sold individually. Driver or passenger side fitment. View/Change Diagram
From $28.50
Make a selection 91154210145 When replacing the glass, always be sure to check the window lifter rail for corrosion. Replacing it with the window glass will save future headaches. The window lifter rail is part # 91154205742 and be sure to add the seal, part # 91154249140 sold individually. Driver's side fitment. 1 needed per car. View/Change Diagram
From $371.80
Make a selection 91154290500 This gasket sits inside the window frame to channel the window glass. It can degrade with time and is essential to keep moisture out of the cabin. We recommend replacing the right and left sides together. When inspecting your window guide gaskets, look to see if your door caps are missing and need to be replaced, part # 9997033454001c and 9997033444001c. They commonly get brittle and fall out with time. Sold individually. Driver or passenger side fitment. View/Change Diagram
From $23.00
Make a selection 911552055077AE High-quality reproduction, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
From $894.30
Make a selection 9115550551570EQ Quality replacement headliner for original number, 911 555 055 157 00. This is made by dansk, they offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality, factory fitment and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car.
From $192.50
Make a selection 9115555050101EQ We go to extra lengths to ensure that our linings are as similar to the originals as possible. Each is cut and trimmed to fit perfectly. Replaces original part # 911 555 505 01 05t made in Germany. Sold individually. 1 necessary per car.
$94.60
Make a selection 911561023003EQ This is a complete cabrio top cover made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes all of the original tenax snaps / retainers in the original locations. This would replace original part # 911 561 023 003 av made in Germany. Sold individually. 1 necessary per car. Please note: if you own a 1986-89 model please see our part # 911561023602eq
$873.40
Make a selection 911561023606EQ This is a complete cabrio top cover made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes all of the original tenax snaps / retainers in the original locations. This would replace original part # 911 561 023 60 6ha made in Germany. Sold individually. 1 necessary per car.
$1,321.10
Make a selection 914424018001 Is your shift knob looking a bit worn and tattered? Replace it with a quality knob manufactured by dansk. They offer a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment manufacturers (oem) to Porsche in Germany. We also recommend purchasing a new crush sleeve to complete the installation, part # 99953200300 sold individually. 1 necessary per car.
$44.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |