PORSCHE 356 C HEAD AMPCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 - Accessories (includes uncategorized and accessory items) BES99115000S + 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 4 x 3.5 (90mm) round tips. - net weight is 16.4 kg / 36 lbs. (10 lb savings over stock 3.4 l mufflers) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - 90 db maximum (oem muffler is 75 db for reference). - replaces OEM side mufflers and connects to OEM header and catalytic flange. Please note: this muffler does not include exhaust valves and is meant to replace the OEM system on the base 3.4l 991 (2012+). Power is stated at the crank. This is the very 1st aftermarket muffl...(choose a part on the right to read more)
$4,179.38
Make a selection RES99600160S Race exhaust system 996 GT3, stainless steel, 100 cell sport cat with tips facts: - + 25 crank hp & + 19 crank torque - 100 cell catalytic - long tube headers 50 mm diameter primary tubing / 55 mm collector. - "u torque" design tubing style muffler that expands to a 70mm (2.75") diameter. - weighs 36 lbs. (16,4 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - adjustable turn down 70mm (2.75") round tips - cone style connection design to prevent exhaust leaks - includes quick release clamps - made in Germany - dme programming necessary. FVD Brombachersoftware has been developed for this exhaust application. - can be ordered with 50, 200 cell cats. Please ask your FVD sales r...(choose a part on the right to read more)
From $6,359.36
Make a selection BES99720020S Brombacher stainless steel exhaust system for the 997-2 facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - sealing cone style connections and quick release clamps - 4 x 3.5 (90mm) round tips - made in Germany -+ 28 hp & + 20 lb.-ft torque gain with exhaust system only. - weighs 72 lbs.(33,0 kg). The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg). Figures: genuine: engine - 6 cylinder boxer capacity - 3800ccm compression ratio - 12,5:1 max. Power - 283kw (385hp) @ 6500rpm max. Torque - 420nm (310lbf ft) @ 4400rpm max. Speed - 300km/h max. Rpm - 7500rpm acceleration 0-100km/h - 4.5s level 3 tuning (includes FVD software, sport airfilter and exhaust) max. Power - ...(choose a part on the right to read more)
$6,939.11
Make a selection 70476LED The h-4 hella led headlamp conversion is the best thing you can do for your lighting! bright white light illuminates much further than stock or even the typical h4 headlamps, showing you the whole roadway. These hella leds bolt directly in place of your headlamps and include the cable and relay. The ultimate. A must for us near-sighted drivers! if you have a 356 six volt system please specify and we will substitute the six volt leds order two for a complete set. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 924 1986-88 924 1980-85 924 1976-79 944 1989-91 944 1985-88 944 1982-85 928 1983-86 928 1978-82 914 1970-76 968 1992-95 ACCESSORY
$214.92
Make a selection 70476 The h-4 headlamp conversion is the best thing you can do for your lighting! bright white light illuminates much further than stock headlamps, showing you the whole roadway. H-4's bolt directly in place of your headlamps. optional 100 watt bulbs are the ultimate. Note: h-4's are a must for us near-sighted drivers! if you have a 356 six volt system please specify and we will substitute the six volt bulbs. order two for a complete set. other higher wattage bulbs available. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 924 1986-88 924 1980-85 924 1976-79 944 1989-91 944 1985-88 944 1982-85 928 1983-86 928 1978-82 914 1970-76 968 1992-95 ACCESSORY
From $12.96
Make a selection RES99620060S Race exhaust system 996 GT3, stainless steel, cat bypass with tips facts: - + 25 crank hp & + 19 crank torque - catalytic bypass - includes quick release clamps - made in Germany - dme programming necessary. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
From $4,579.74
Make a selection RES99111060SL Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany. They manufacture a multitude of Porsche motorsport and racing exhausts. Each system is tested comprehensively for flow characteristics, thermal stress, cracking, and longevity. If you are looking for an exhaust product that can handle abuse at the track, look no further. Features: - made of t 316 motorsport grade stainless steel for improved durability over t 304. - fits 991.2 GT3 & GT3 rs models. - connects seamlessly to factory side mufflers or side muffler bypass. - does not include o2 sensor bungs like competitors' products, so laminar flow is retained. - reuses factory exhaust rings and clamps. - made in Germany by...(choose a part on the right to read more)
$4,239.97
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |