PORSCHE 911 PRESSURE PINCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 - Body (includes uncategorized and accessory items) FVD123042ATK FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
$2,854.50
Make a selection FVD200004 This set includes a revolutionary concept for protecting your tires while storing your vehicle. These tire savers have no recess! Independent tests have shown that a depression only makes sense if the fit is exact, typically this is not the case as there are so many tire options and variations in sizing. Why should you opt for tire saver? They are high quality, made in Germany and will prolong the life of your tires as they will not deform the tire with the weight of your vehicle. With other products that have a recess, owners experienced jacking difficulties or had to increase the air pressure in order to protect the tire in the recess. Those days will be over with the tire savers! Simply position the tire sav...(choose a part on the right to read more)
$297.00
Make a selection FVD33396401 A cost-effective combination of bilstein b6 shocks with a set of German h&r lowering springs. This kit is a perfect balance of performance and comfort for street use. Benefits: optimum adhesion and enhanced stability for daily driving and extreme driving situations. Slightly lower stance at 1.3 inches (35 mm) front / 1.18 inches (30 mm) rear. Marked improvement in safety and sportiness. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Please note: if you would like to reduce the ride height, please order part # 115110016 which will lower the stance by another 1.5 inches (40mm).
$2,538.69
Make a selection FVD36203404 German made lightweight aluminum valve which is anodized in titanium grey. This valve can also work with tire pressure monitoring systems. Maximum pressure: 14 bar length: 43 mm (1.7 inches) valve hole diameter: 11.3 mm (.44 inches) weight: 12 grams made in Germany sold individually.
$18.70
Make a selection FVD361RDK001 This tire pressure sensor is made by the original manufacturer to Porsche, huf. It is a good idea to change the valve stem out when changing the sensor. The valve stem is part # 993343018001 huf and major organizations including the tire industry association, recommend the tpms sensor and valve be replaced for: fitting new tires puncture repairs changing rims electronic failure damage during tire service damage by road hazards valve core or nut seizure did you know that the transportation recall enhancement, accountability and documentation) act in the u.s. Requires that 100% of all passenger cars, light trucks, and buses manufactured in the united states after september 2007 be equipped with a tire pressure mo...(choose a part on the right to read more)
$401.25
Make a selection FVD36203403 Valve especially for high lateral loads and quick acceleration. Also for cars running high inflation pressures and high temperatures. Maximum temperature for the seal: 150 * c. Maximum pressure: 14 bar shaft: 12 mm (.47 inches) valve hole diameter: 11.3 mm (.44 inches) weight: 30.4 grams made in Germany sold individually. Please note: these are not meant to be used with tire pressure monitors or hollow spoked wheels.
$9.90
Make a selection 93010734714 This part is sourced in Germany to ensure quality, reliability and precise fitment. This will fit all the vehicles listed in the fitment tab and those that have been updated to pressure fed tensioners. This line requires that you also purchase part # 93010734706 . We also recommend purchasing 1 qty. Union nut, part # 90010400303 and 1 qty. Cutting ring sleeve, part # n0208251 for installation. Also need the right side? Please order part # 93010734812 for the 911 3.2 l and 930 3.3l. Order part # 93010734815 for the 965 3.3 l. Sold individually. 1 necessary per car.
From $41.80
Make a selection FVDB7035500 FVD Brombacherstainless steel brake lines for Porsche are manufactured in europe and are approved for all abs systems. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. They are also coated in a uv resistant pvc jacket to protect the wire and inner hose from the elements, chemicals and abrasion. This construction ensures minimal expansion inside the hose core and eliminates that "spongy" brake feel that is commonly found in the OEM brake lines. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. Our lines are DOT approved by conforming to the fmvss 1...(choose a part on the right to read more)
$169.40
Make a selection FVDB2435500 FVD Brombacherstainless steel brake lines for Porsche are manufactured in europe and are approved for all abs systems. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. They are also coated in a uv resistant pvc jacket to protect the wire and inner hose from the elements, chemicals and abrasion. This construction ensures minimal expansion inside the hose core and eliminates that "spongy" brake feel that is commonly found in the OEM brake lines. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. Our lines are DOT approved by conforming to the fmvss 1...(choose a part on the right to read more)
$158.40
Make a selection FVDB9135500 FVD Brombacherstainless steel brake lines for Porsche are manufactured in europe and are approved for all abs systems. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. They are also coated in a uv resistant pvc jacket to protect the wire and inner hose from the elements, chemicals and abrasion. This construction ensures minimal expansion inside the hose core and eliminates that "spongy" brake feel that is commonly found in the OEM brake lines. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. Our lines are DOT approved by conforming to the fmvss 1...(choose a part on the right to read more)
$192.50
Make a selection FVDB68355CS1 With 030 sports suspension FVD Brombacherstainless steel brake lines for Porsche are manufactured in europe and are approved for all abs systems. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. They are also coated in a uv resistant pvc jacket to protect the wire and inner hose from the elements, chemicals and abrasion. This construction ensures minimal expansion inside the hose core and eliminates that "spongy" brake feel that is commonly found in the OEM brake lines. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. Our lines are DOT approved b...(choose a part on the right to read more)
$192.50
Make a selection FVD721801046 Flaig tire gauges are high quality German gauges that are the standard for accuracy in the industry. Measurements range from 0 to 55 psi (0 to 4 bar). Pressure is adjusted via fingertip release and the read out is held until released so that each tire can be perfectly adjusted. General FitmentALL
$48.40
Make a selection BESKLS001001
$1,189.10
Make a selection FVD64110510901
$73.70
Make a selection 99311063356EQ
$367.40
Make a selection 99311063256EQ
$367.40
Make a selection 92811603127
From $395.00
Make a selection 240991351RSL01 Pagid is one of the leading manufacturers for asbestos free racing brake pads and offers compounds for every Porsche. The correct brake pad can make the difference between winning and losing. Pagid race pads are only for racing. Correct brake-in after refreshing the brake pads: * 3 to 4 brake applications with medium pedal pressure from 100 mph to 50 mph. Allow 900-1500 feet cooling time between brake applications. * 2 to 3 brake applications with harder pedal pressure from 110 mph to 60 mph. Allow 1500 feet cooling time between brake applications. Avoid wheel lock-up and abs. * 1 to 2 in-between clean-up brake applications. Do not allow the brake pads to overheat during the break in period. Rsl29/yellow: featu...(choose a part on the right to read more)
$801.90
Make a selection 99133305105 Bilstein b4 OEM (original equipment manufacturer) replacement shock absorber for your Porsche with standard suspension. The b4 damper from bilstein is the perfect replacement for your Porsche. Facts: - constant damping power under any load - high power reserves for maximum safety - ride like it's the first time, every time - OEM quality - bilstein gas pressure technology
From $478.79
Make a selection FVD364101865ALT Low pressure casting uses positive pressure to move the molten aluminum (al si 7 mg) into the mold more quickly and achieves a finished product that is denser than a gravity cast wheel. Low-pressure casting has a slightly higher production cost over gravity casting, but offers superior durability and excellent value. The heat treating process reestablishes the structural integrity and strength of the material, which are compromised in the initial iron and steel work processes. High light technology (hlt) uses rollers to compress and elongate the material along the barrel of a low-pressure cast aluminum wheel to obtain the desired profile. This process, which is directly derived from o.z.'s experience in racing...(choose a part on the right to read more)
$646.80
Make a selection FVD361RDK002 This tire pressure sensor is made by the original manufacturer to Porsche, huf. It is a good idea to change the valve stem out when changing the sensor. The valve stem is part # 993343018001 huf and major organizations including the tire industry association, recommend the tpms sensor and valve be replaced for: fitting new tires puncture repairs changing rims electronic failure damage during tire service damage by road hazards valve core or nut seizure did you know that the transportation recall enhancement, accountability and documentation) act in the u.s. Requires that 100% of all passenger cars, light trucks, and buses manufactured in the united states after september 2007 be equipped with a tire pressure mo...(choose a part on the right to read more)
$451.99
Make a selection 115910986002 Bilstein b8 / OEM m030 (original m030 suspension) shock absorber set (4 pieces) for cars with lowering springs or cars delivered with factory m030 sport suspension. Nothing is better than the original! The b8 / m030 dampers from bilstein are the perfect shock absorber for lowered cars. Facts: - constant damping pressure under load - increased driving stability - increased durability - OEM quality - bilstein gas pressure technology - type/model m030
$1,223.20
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |