![](https://30ed524141d0cac60ab4-d2e2d18a14257de3b9ce428cf077ee97.ssl.cf2.rackcdn.com/acban.jpg)
PORSCHE 987 HUB CACan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 - Engine (includes uncategorized and accessory items) ![]()
$212.03
Make a selection 106082 There are not many warning signs of an impending ims failure short of a “death rattle” that occurs as the bearing fails and comes apart. These kits replace the factory sealed bearing with a new, severe duty custom ceramic hybrid roller ball bearing for reduced friction and superior performance in poorly lubricated operating conditions and replaces the factory ims flange hub, bearing support, and fastener with a stronger, revised billet chromoly assembly. The center bearing support also receives an increase in size and no longer is cut for the o-ring that keep engine oil from leaking out of the engine - we have relocated the o-ring to the ims hub flange for added strength to the center stud & bearing support...(choose a part on the right to read more) General FitmentBOXSTER 2005-08BOXSTER 1997-04 911 1998-05
$681.94
Make a selection FVDBRO1016003A Weight savings approximately 4kg (8.8 lbs) of rotating unsprung weight. Oem disk weight 10,8kg (23.8 lbs), brembo disk weight 8.9kg (19.69 lbs) rotors: (13") 330x34mm drilled discs bells / hats: precision milled billet aluminum hardware: brembo floating anti-rattle disc hardware by using an aluminum bell for the hub section of the disc, these rotor assemblies save a great deal of weight. Since this is both rotating and unsprung, it benefits the acceleration, braking, and handling of the vehicle. Secondly, it is better able to handle the large temperature changes that a brake disc experiences. The mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has eng...(choose a part on the right to read more)
$1,815.00
Make a selection FVDBRO906520 This disc is a genuine brembo replacement part. It is drilled and vented. Sold individually. Be sure to purchase the correct disc assembly hardware kit, FVD part # FVDbro915502 and hub FVDbro901605.
$441.10
Make a selection FVD35161103B Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. This spacer fits between the wheel and hub. Size: 7 mm (.275 inches) bolt pattern: 5/130 center bore: 71.6 bolt / stud: n/a thread type: 14x1.5 material: strength tested aluminum alloy coating: anodized for corrosion protection hub alignment set screws are included. Longer bolts sold separately depending on application. Made in Germany. Sold individually. Can be used in front and/or rear. No...(choose a part on the right to read more)
$40.70
Make a selection NLARB1SETB 5-inch wheel set, with 15x4 5 spare, four new brake drums and hub conversion set for 356b
$17,594.50
Make a selection FVD347088 The momo prototipo is a classic wheel using a combination of the finest modern materials giving it the perfect blend of old and new. Made from top grain leather with white stitching, black cut-out spokes and includes a momo horn button. Momo prototipo is the excellent choice for those wishing to retain the character of their vehicle while refreshing the interior. Style: rally color: black material: leather spoke finish: black horn: matte black with momo horn button diameter: 13.78 in (350 mm) rim diameter: 1.29 in (33 mm) dish: 1.4 inch (37 mm) weight: 2.86 lbs. (1.3 kg) please note: this kit is only for cars without an airbag. Vehicle-specific hub adapter required.
$297.00
Make a selection 64468010SET 5 inch, with hubs and knock-offs silver painted new production from Germany 64468010
$14,300.00
Make a selection NLARB1SETC 5-inch wheel set, with 15x4 5 spare and hub conversion set for 356c
$20,328.00
Make a selection FVD35161107 Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. This spacer fits between the wheel and hub. Size: 7 mm (.275 inches) bolt pattern: 5/130 center bore: 71.6 bolt / stud: n/a thread type: 14x1.5 material: strength tested aluminum alloy coating: anodized for corrosion protection hub alignment set screws are included. Longer bolts sold separately depending on application. Made in Germany. Sold individually. Can be used in front and/or rear. No...(choose a part on the right to read more)
$93.97
Make a selection FVD721115100 Inhalt : - 10 lange steckschlussel (14,15,16,17,18,19,21,22,24 mm). - 3 verbindungsstucke m. Schraubeinsatz f. Schlitzschrauben 5,6 u. 8 mm. - 3 verbindungsstucke mit 6-kant-schraubeinsatz, 8, 9 u. 11 mm. - 1 verlangerung mit magnetischem schraubeinsatzhalter, 7,94 mm. - 1 verlangerung mit schraubeinsatzhalter, 6,35 mm. - 1 verlangerung mit 8 mm vierkant. - 5 schraubeinsatze : eh, 6,7,8 mm - exr.140 und ex.245 - xzn ev.212. - 1 gleitgriff j.120. - 1 ringschlussel 68.17x19. - 1 adapter fur drehmomentschlussel. Zum festhalten des stossdampferschafts beim losen bzw. Anziehen der mutter. Drehmomentanziehen mit hilfe eines drehmomentschlussels. Kann mit weiteren schraubeinsatzen (torx, xzn, 6-kant) erweitert werden....(choose a part on the right to read more)
$768.90
Make a selection FVD721102565 Lasthub elektro-hydraulisch, steuerung uber drucktasten (auf und ab), feinhub hand-hydraulisch, bei master gear 0,5/1,0 erfolgt lasthub fusshydraulisch, ablass per fussbedienung (das integrierte senkbremsventil erlaubt ein exaktes dosieren der absenkgeschwindigkeit), die variodesk-aufnahmeplatte besitzt eine verschiebbarkeit von ± 20 mm in x- und y-achse und eine neigbarkeit von ± 2* (nur master gear 1,0/2,0), aufnahmebohrungen ermoglichen die sichere befestigung fahrzeugspezifischer betriebsmittel. Aufnahmebohrungen: zusatzliche, fahrzeugspezifische betriebsmittel, lassen sich auf der tischplatte mit hilfe der durchgangigen lochmatrix stabil befestigen. Sicherheit: die grosse standflache der master gear-...(choose a part on the right to read more)
$12,784.20
Make a selection 129PR851821 The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved.
$999.90
Make a selection 129PR951859 The rh speedline style wheel is a period correct replica for any air-cooled Porsche model. It is a three-piece modular wheel with a cast center and spun aluminum inner and outer barrels. The center is painted in a silver metallic paint and clear-coated for a durable shine. The inner barrel is silver anodized while the outer lip is high-polished and then clear coated to protect the shine for a maintenance free finish. The wheel also features a hub-centric 71.6 mm (2.82 inches) center bore to ensure a vibration free ride. The wheel accepts original mounting hardware along with the original center cap. The wheel is shipped with a metal valve stem and rh center cap. German-made and TUV approved.
$1,166.00
Make a selection FVD35161107B Wheel spacers make your tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety, or simply desire your car to make a statement about your individual style, wheel spacers can help you accomplish your goal. This spacer fits between the wheel and hub. Size: 7 mm (.275 inches) bolt pattern: 5/130 center bore: 71.6 bolt / stud: n/a thread type: 14x1.5 material: strength tested aluminum alloy coating: anodized for corrosion protection hub alignment set screws are included. Longer bolts sold separately depending on application. Made in Germany. Sold individually. Can be used in front and/or rear. No...(choose a part on the right to read more)
$93.97
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |