Vehicles
Sections
34 not categorized PORSCHE 944S PLASTIC RINGCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 (includes uncategorized and accessory items) 44455298599RL This set includes a high quality instrument surround, radio cover, ignition cover, and glove box covers. Each piece is a carbon overlay, meant to be adhered to your original plastic trim covers. We recommend adhering the carbon overlays to your originals with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold as a complete set. Please note: this is for cars without air bags!
$3,668.50
Make a selection FVD10699701 This radiator is produced by the racing & high-performance division of csf who design, engineer and manufacture the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers all aluminum high performance radiators that are a direct-fit replacement for Porsche racecars and streetcars. Csf radiators improve cooling efficiency by 10-20 % over the factory radiators. Each radiator is stamped to the same geometry and includes aluminum end tanks that offer more reliability than the factory plastic end tanks. Each csf end tank features quality welding and is generally considered the strongest tank design in the industry. If you are planning to upgrade or replace your radiators, we highly re...(choose a part on the right to read more)
$548.90
Make a selection FVD10699710 This radiator is produced by the racing & high-performance division of csf who design, engineer and manufacture the most advanced, efficient, and reliable cooling systems in the world. Csf manufacturers all aluminum high performance radiators that are a direct-fit replacement for Porsche racecars and streetcars. Csf radiators improve cooling efficiency by 10-20 % over the factory radiators. Each radiator is stamped to the same geometry and includes aluminum end tanks that offer more reliability than the factory plastic end tanks. Each csf end tank features quality welding and is generally considered the strongest tank design in the industry. If you are planning to upgrade or replace your radiators, we highly re...(choose a part on the right to read more)
$526.90
Make a selection FVD201911RSR100 Whether you are restoring a tribute car or endurance racing your 911, this tank will fit the bill. It is made in Germany from pvc plastic and includes high grade threaded brass inserts. It is build by fia specs and can be adapted to work in all 911's from 67-89. It holds a capacity of 26.4 gallons or 100 liters.
$3,065.70
Make a selection CSF7044 Csf has listened to the community and have developed the world's 1st high performance "drop-in" fit replacement for the 911 (996) and Boxster (986). All weak plastic mounting points and end tanks that are prone to breaking under bumper contact or high vibrations have been cnc machined in military-grade aluminum for unbreakable strength. Even better, this unit is interchangeable for both the left and right side bumpers. Csf is the first and only radiator company to cnc machine all their brackets and fittings for the world's strongest and best drop-in fit radiator featuring an exclusive "b-tube" technology. Another world's 1st and exclusive unit from csf. General Fitment911 1998-05BOXSTER 1997-04
$606.15
Make a selection P202 Change your cars look with the addition of lamin-x taillight kits. available in smoked or charcoal, the thick durable coverings are extremely easy to apply to your vehicle in the precut kits. offering a smooth, glossy, and consistent color throughout, the lamin-x kits are much improved over the less then effective spray on kits. the precut kits have adhesive backs to fit on any flat or shaped surface with ease. the smoked and charcoal kits are tinted only 17 percent allowing 83 percent light passage through. this is a great alternative to bulky plastic light coverings. General Fitment911 1965-69912 1965-69 911 1998-05
From $45.00
Make a selection GT2DUCS Brakes slow your car by turning friction into heat, help remove more of that heat! These are the largest brake cooling ducts available for street use, they come from the European 911 GT2. A two piece duct, consisting of a hard plastic securing base, and a more flexible scoop on the bottom. On some applications, the wheel well liner or duct may have to be modified due to their large size. These are the largest air ducts available for a street car and they fit '98-and-up 911, and all Boxster and Cayman. Note- you need to be running a 18" or larger wheel with these ducts. General FitmentBOXSTER 1997-04911 2005-08 911 GT3 2007-11 911 GT3 2003-05 911 TURBO/GT2 2001-05 BOXSTER 2005-08 911 1998-05
$425.96
Make a selection RE3204 Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torque bolts. Another great feature of these hooks are that rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Rennline's rear tie-down brackets are available in 66° to allow you to install these brackets in ma...(choose a part on the right to read more) General FitmentBOXSTER 1997-04BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$214.50
Make a selection TSPOR008 Torque solution rear drop links General Fitment911 1998-05
$258.19
Make a selection WAP0210460A Nostalgic sheet metal model of the legendary 356 cabrio for collectors and enthusiasts alike. With a powerful spring-drive motor. Base colour: enamel blue. Made of metal and plastic. Limited edition of 2,000 examples worldwide. General FitmentACCESSORY
$132.00
Make a selection VDO240101 This is by far the most elegant and efficient solution for mounting any gauge in your Porsche. black plastic cup with metal bracket and fits one 2 1/16" gauge. Long body has plenty of room to fit any fitting out of the back of the gauge. Cup tilts in it's mount for the best viewing angle. Comes with rubber gauge ring for the perfect fit. General FitmentALL
$60.95
Make a selection 10610 Billet aluminum ims to crankshaft chain guide/tensioner, replacement for Porsche part no. 996 105 165 55, to help prevent catastrophic engine failures like this. Shown below is a comparison of our billet tensioner paddle compared to the cast factory tensioner. Billet construction provides a significantly stronger and more durable product while utilizing oe Porsche wear pad and pressure pin (both of which are included as shown). Update: we've found the factory plastic pressure pin to not be strong enough, so we've made a billet steel pressure pin against which the chain tensioner actuates to tension the crankshaft to ims drive chain. This is a return to a style of pressure pin found in very early examples of t...(choose a part on the right to read more) General FitmentBOXSTER 1997-04911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 911 2005-08
$320.95
Make a selection 444552985049 This set includes a high quality radio cover, ignition cover, and glove box covers. Each piece is a polished (gloss finish) carbon overlay, meant to be adhered to your original plastic trim covers. We recommend adhering the carbon overlays to your originals with wurth bond and seal (sold separately). Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold as a complete set. Please note: this is for cars with air bags!
$2,655.40
Make a selection FSBA22 The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness. they are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.
$495.00
Make a selection
$21.85
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |