Vehicles
Sections
214 not categorized PORSCHE 356C BUSHINGCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1998-05 (includes uncategorized and accessory items) FVD205993001VA H&r front sway bar with a 26 mm diameter. 2-way adjustable. This is the front sway bar from our kit, part # FVD205993001. Includes bushings. Sold individually. 1 needed per car.
$473.00
Make a selection 99634104306 Forged arm w/ urethane bushing View/Change Diagram
From $153.15
Make a selection FVD33150005 Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm cannot compensate enough when lowering your Porsche, leaving you with as much as ½ inch of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold in pairs. 1 necessary per car.
$764.50
Make a selection 96434101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for...(choose a part on the right to read more)
$418.00
Make a selection SPLDB996 Spl titanium rear camber links allow for an increased range of rear camber adjustment, necessary for lowered street cars and performance alignments for racing. The next generation nct motorsports bearing feature a carbon fiber teflon liner to provide quiet operation, lower friction, smoother articulation and eliminates bushing deflection under load. the injection-molded slot-loaded liner is also self-lubricating and self-cleaning, offering robust reliability for street and track use. Pair with the spl titanium rear toe links and spl eccentric lockout kit for total rear camber and toe alignment with "zero-slip". General Fitment911 1998-05911 TURBO/GT2 2001-05 911 2005-08 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 TURBO/GT2 2010-13
$943.65
Make a selection SPLRTA996 For those who have converted to "true" coilovers in the rear suspension (rear spring relocated over shock) and no longer need the mid link to hold the rear springs, the spl titanium rear toe links replace the stock mid links to provide a wide range of toe adjustment, necessary for lowered cars or for performance alignments. The spl titanium series toe links feature 1.25" 4130 chromoly tubing that is slipped over a cnc machined threaded sleeve then tig welded, making the links extremely strong yet lightweight. The exclusive 4130 chromoly hybrid adjuster offers quick and precise adjustment, and is cnc gundrilled to reduce weight. Blue anodized titanium hardware shaves even more unsprung weight from the arms, w...(choose a part on the right to read more) General Fitment911 1998-05911 TURBO/GT2 2001-05 BOXSTER 1997-04 CAYMAN 2006-08
$876.15
Make a selection S1116FDL Upgrade your stock front swaybar with this simple bolt in replacement for the factory drop links. Left & right hand threaded rodends allow for simple length adjustment to eliminate swaybar preload. Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. Eliminates the factory compliant plastic drop link bushings that deflect under loading and quickly wear out. High misalignment, stainless steel spacers allow for superior bind free operation and corrosion resistance. Precisely connects the stock or adjustable swaybar to the front strut assembly f...(choose a part on the right to read more) General FitmentBOXSTER 2005-08911 1998-05 911 GT3 2007-11 911 2005-08 CAYMAN 2006-08 911 GT3 2003-05
$354.00
Make a selection 99334101702ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install original control arm bushings. . Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for its return to you. We do not offer a core exchange on this part. Sold individually....(choose a part on the right to read more)
$418.00
Make a selection 96434101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our OEM front control arm bushings, part # FVD3419991. They are made with 65 shore rubber like the original control arms. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for...(choose a part on the right to read more)
$418.00
Make a selection 96434307281ATK Looking for a more cost-effective solution than ordering a new link? Let us recondition your original drop link. The reconditioning process includes full inspection, disassembly, degreasing and media blasting. Once fully prepared, we properly install new bushings, finish with a corrosion proof coating and include a new lock nut. Please note: each link is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your link we will notify you as soon as we can. Arrangements can be made for its return to you. Sold individually. 1 necessary per car.
$194.70
Make a selection 99333105180 The bushings are made of rubber with an 85-shore hardness value, which is more durable, provides more positive suspension location and is still quiet and comfortable for street use. Sold individually.
From $764.50
Make a selection ST1089 This pilot bearing puller was designed to easily extract bearings and bushings with an id of 15 mm and up to 20 mm. For bearing use only; not for bushings. Please call our office for availability. General FitmentALL
$79.95
Make a selection
$21.85
Make a selection FVD721TB90P2
$209.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |