PORSCHE 997 SPORT EXHAUST SYSTEMCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 2009-12 - Fuel/Exhaust (includes uncategorized and accessory items) RES99700160S Please note: system is shown with thermo-isolation which is sold separately! - header diameter 55mm - tube diameter 76mm after the headers - recommended for engines 450hp+ all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$8,753.75
Make a selection FVD99110042S +140 crank hp & +155 crank tq gain on the turbo and +100 crank hp & +126 crank tq gain on the turbo s. All while offering ultra-smooth drivability and reliability that you expect from your Porsche. Package includes: - FVD my genius handheld flash tool (included). - FVD tuning software FVD99161840mg. - bmc sport filter 47079801. - FVD sound version muffler with 200 cell hjs tri-metallic cats bes99100240shd. - FVD headers bes99101040s. - FVD exhaust installation kit (everything needed for simple installation). FVD power gains: max. Power - 485 kw (660 hp) @ 6500rpm max. Torque - 870 nm (642 lb.-ft.) @ 3750rpm max. Speed - 330km/h (206 mph) max. Rpm - 7200 rpm acceleration 0-100 km/h (0-62.5 mph) - 2.9s genuine: e...(choose a part on the right to read more)
$9,238.85
Make a selection 21011199634 T-316 stainless steel headers from FVD produce dyno proven horsepower and torque as well as a phenomonal sound! FVD headers feature equal length, mandrel bent tubing and a merge collector to further improve exhaust gas flow, reduce system back pressure and optimize exhaust gas scavaging and cylinder filling. FVD headers are dyno tested and produce up to 15 lb ft. Of torque in the mid range where the 3.4l needs it most. Tech tip: for older cars repair-kit FVDmk996201
$2,333.10
Make a selection BES99115000S + 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - 4 x 3.5 (90mm) round tips. - net weight is 16.4 kg / 36 lbs. (10 lb savings over stock 3.4 l mufflers) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - 90 db maximum (oem muffler is 75 db for reference). - replaces OEM side mufflers and connects to OEM header and catalytic flange. Please note: this muffler does not include exhaust valves and is meant to replace the OEM system on the base 3.4l 991 (2012+). Power is stated at the crank. This is the very 1st aftermarket muffl...(choose a part on the right to read more)
$4,063.29
Make a selection BES99729000S1 For 997-2 with OEM or valved Porsche sport exhaust (pse). Facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - made in Germany power: - 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm) - 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm) - with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm) tech tip: dme programming neccessary!
$3,611.69
Make a selection BES95B05040SK + 15 hp & + 18 tq gain. - 2.5 tubing (63.5mm). - 4 x 4 (101mm) round tips. - 8.5 lb. Weight savings over OEM mufflers. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - electronic valve controller must be removed from the OEM unit and added to our muffler. - made in Germany. Please note: this muffler is a direct replacement the macan turbo (95b) model which comes with a single electronic exhaust valve on the passenger side. This is the very 1st aftermarket muffler for the macan 95b turbo that includes a valve like the factory system. This allows our system ...(choose a part on the right to read more)
$4,771.31
Make a selection BES9110010ST
$6,887.27
Make a selection RES99710280S Race system grand am spec. 997 3.6l & 3.8l facts: - headers - 3 x 45mm (1.77") diameter tubing into a 1 x 70mm (2.75") collector (reduces thermal stress) - muffler - interchangeable cat bypass tube w/ 4 tube style mufflers, tubing 70mm (2.75") - weighs 36 lbs. (16,4 kg) - developed for excellent mid range torque needed out of corners - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability - made in Germany - intoxicating growl at idle, partial throttle and wide open throttle - 997 3.6l & 3.8l - grand-am regulation 106db - approved for use in the grand-am continental series - no dme programming necessary includes: 4 x conical springs 2 x adjustable exhaust tips w/ clamps 1 x muffler bracke...(choose a part on the right to read more)
From $6,137.62
Make a selection RES99600164S FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
From $10,889.34
Make a selection RES99625260SSGB This system was created for the low db race tracks in great britain, hence the "gb". It will pass the strict requirements of tracks like donnington park, oulton park and castle combe. So obviously you will be able to run this system at silverston, rockingham. Our exhaust has a static (standing) measure of 98 db measured at ¾ max revs 50 cm from the tailpipe. The drive by (passing) measure is 102 db.* power gains are + 25 crank hp / + 19 crank torque. The system will bolt up to the factory GT3 headers and includes a 200 cell "x-torque"design which diminishes db's while increasing torque. The muffler is a lightweight free flowing design which includes a balance tube design to further decrease db's but al...(choose a part on the right to read more)
$5,026.56
Make a selection RES99610160S All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$11,777.54
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |