PORSCHE CAYENNE S SIDE SEALCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 2009-12 - Rear Axle (includes uncategorized and accessory items) FVD33150030 This kit is complete and includes a total of 8, 4 smaller and 4 larger for the rear control arms. Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 t6 aircraft aluminum. They will positively locate the suspension arms so suspension motion is accurately repeated in every corner. Sold as a set of 8. 1 kit is necessary per car. Please note: noise may resonate inside the cabin during street use.
$746.90
Make a selection FVD33150046 Replace worn-out original soft rubber track rod bushings with these OEM replacements. They are made of rubber that has a 65-shore hardness value, just like the oem. They will restore the original ride comfort and are more forgiving than the clubsport (85 shore rubber). This bushing is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes a 65-shore hardness value core. Sold individually. 8 are necessary per car. Please note: this does not include the track rod, the picture circled in red is just for reference.
$60.50
Make a selection FVD33300902AT Send us your original spring plate and we will have it reconditioned for you. The reconditioning process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, degrease and media blast the part. Once fully prepared, we install new rs spec. (85 shore) rubber bushings/bearings. 85 shore rubber is more durable than OEM 65 shore and provides more positive suspension location yet is still quiet and compliant for street use. Then we seal the spring plate with a corrosion resistant plating. Sold individually. 2 necessary per car. Please note: this only fits cars with the g50 transmission.
$261.80
Make a selection FVD3511M18002A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,394.50
Make a selection FVD3511M39040A2 The brembo gran turismo (gt) braking system with type iii rotors is ideal for ideal for clubsport and sprint type track events. It utilizes brembo type iii aggressive face-type discs that offer high initial response with a smooth pedal feel. The type iii offers the highest overall braking confidence and control, allowing a quick qualifying time or top results in sprint races. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with opposed pistons, a complete set of high-performance brake pads, abrasion and corrosion resistant goodridge braided steel brake lines and high-quality fastener hardware...(choose a part on the right to read more)
$5,054.50
Make a selection FVD50599109MM The moshammer stormforce evo rs front chin spoiler for the c2 / c2s / c4 / c4s and the t models blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce and uplift reduction. It also incorporates twin air guides to assist with brake ventilation and underbody air flow efficiency. The moshammer stormforce evo rs front chin spoiler design offers exclusive aesthetics, aero functionality and it is secured seamlessly into the factory locations without modification. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added...(choose a part on the right to read more)
$1,237.50
Make a selection FVD3522P18027A The brembo gran turismo (gt) braking system is ideal for use on the street and for light track use. This GT system expands upon the original drilled disc's face type made by Porsche. The cross drilled disc surface continuously refreshes the braking surface and offers the highest initial response of any disc type. So, you can confidently respond to sudden pedestrian or traffic movement with maximum braking performance. Drilled discs operate in a wide range of operating temperatures and environments and respond confidently in wet weather. The GT line is dedicated to the most demanding customers. It originates from racing components, consisting of floating ventilated cross drilled discs, aluminum calipers with op...(choose a part on the right to read more)
$4,064.50
Make a selection FVD58099100 German manufactured bolt in harness bar solution that is less obtrusive than a full roll bar. This harness bar is secured to the rear strut towers with the included high-grade fasteners. Features: seamlessly secured to the rear strut towers allows full front seat range of motion ideal for a lease or to return to the original equipment does not require trimming or cutting any interior parts discreet single belt tube airbag and belt tensioner system remain fully operational chromoly steel tig welded black finish factory seat belts or 4-5-6-point belts can be used. Cost effective for club sport use. Please note: this requires the removal of the rear seat back rests.
$764.50
Make a selection FVD51299122MM The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the evo rs (991.2 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: vented f...(choose a part on the right to read more)
$1,844.70
Make a selection FVD51299124MM The moshammer stormforce evo rs rear spoiler for the 991.2 model blends a bit of Porsche ducktail heritage into its design to increase rear downforce and reduce front axle uplift. The contours of this spoiler have a step effect which seamlessly blends into both rear quarter panels. When viewed at a standstill it has a subtle factory like appeal that complements the cars lines. When deployed the rake angle takes on a more aggressive appearance evoking thoughts of the much beloved ducktails. Like a majority of the moshammer offerings, this spoiler is a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looki...(choose a part on the right to read more)
$1,455.30
Make a selection FVD333900 Our drop links are ideally suited for those who are looking to completely eliminate the preload on the rear sway bar to gain superior stability and traction in the corners. Our links mount directly to the threaded rear shock body on bilstein club sport or bilstein super cup rear shocks. Sold individually. For use with bilstein "club sport" rear shock, part # 1150009 or for use with bilstein "super cup" rear shock, part # 115333051
$174.53
Make a selection FVD721T251 This special service tool was developed for the proper installation of oil seal on pulley side of crank shaft. Trying to do this task with any other method is risking a total engine failure by way of a damaged oil seal. Applicable: Porsche model - 996 & Boxster.
$129.80
Make a selection FVD802001 This is an ideal way to update your early model Porsche to a central locking system that locks both doors with the turn of the key. The kit is complete with 2 actuators, control module, mounting hardware, proper cabling, installation and operating instructions. We recommend pairing this kit with the radio remote control, part # FVD8020011 sold as a kit. 1 necessary per car.
$190.00
Make a selection FVD98061891 Genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s FVD software tuning: max. Power - 478kw (650hp) @ 8000rpm max. Torque - 640nm @ 6000rpm max. Speed - 340km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivabi...(choose a part on the right to read more)
$5,494.50
Make a selection FVD95861880MG Genuine: engine - v8 capacity - 4806 ccm compression ratio - 12,5:1 max. Power - 309kw (420hp) @ 6500rpm max. Torque - 500nm @ 3500rpm max. Speed - 256km/h max. Rpm - 7000rpm acceleration 0-100km/h - 6,0s tuning: max. Power - 325kw (442hp) @ 6000rpm max. Torque - 530nm @ 4500rpm max. Speed - 265km/h max. Rpm - 7200rpm acceleration 0-100km/h - 5,7s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importan...(choose a part on the right to read more)
$1,484.16
Make a selection FVD911503185186 This seal kit consists of original part # 911 503 185 00 (left) and 911 503 186 00 (right). The set can be used on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold as a set. 1 set is necessary for front fenders and one set is necessary for the rear. Please note: this is the thinner width. This is not the thicker width from the SC models.
$14.93
Make a selection GR1005 Wurth flexible adhesive and sealant is suitable for a very wide range of bonded joints and sealing work on base materials such as metal, painted surfaces, wood, stone, concrete and plastic (polyester and hard pvc). It cures in the presence of moisture and can be rubbed down. it can be painted over once a skin has formed and does not contain silicone. General FitmentACCESSORY
$28.06
Make a selection WAP51500L0A Yachtsman style. Two flap pockets and two pockets with concealed zip on the front. Sporty double-stitched seam on the shoulders and sleeves. Discreet contrast quilted seam. Embroidered Porsche logo on the sleeve. 90% wool, 10% cashmere. Dark blue. Sizes: s, m, l, xl, xxl. General FitmentACCESSORY
$603.90
Make a selection GR1019 If you are doing sheet metal repair to your Porsche (or any car, for that matter), wurth seam sealer is a must-have. It is used to seals seams & joints that are spot welded, riveted, or bolted. permanent adhesion to bare or painted surfaces. Brush able, low odor formula goes on thick to seal completely, and provides an OEM appearance when finished. Will not sag, shrink, or crack, and is paint-ready in 45 minutes. Temperature range from -13ºf to +176ºf. General FitmentACCESSORY
$58.50
Make a selection FVD99610061A Kit includes: software genius flash tool, sport air filter genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,4:1 max. Power - 331kw (450hp) @ 5700rpm max. Torque - 620nm (457lbf ft) @ 3500-4500rpm max. Speed - 318km/h max. Rpm - 6750rpm acceleration 0-100km/h - 4.0s tuning: max. Power - 375kw (510hp) @ 5000rpm max. Torque - 745nm (550lbf ft) @ 4500rpm max. Speed - 328km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.8s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfected the art of so...(choose a part on the right to read more)
$2,067.23
Make a selection MSPP009 These side stripes give your Porsche a great presence on the street! An original dealer installed item and factory equipment, these stripes look great on vintage cars and gives new Porsche a retro-racing touch. They are easy to install using a little soapy water and masking tape guide line. Stripes are 76.5 inches long. Sold as a set of two, one for each side of your car. General FitmentALL914 1970-76
$85.00
Make a selection GR089392 Rost off extra is fortified with ptfe and has many uses such as lubricating locks, hinges, moving parts, freeing nuts and bolts, stopping and preventing corrosion. This product saves production, maintenance and repair time. It is ideally suited for refrigeration equipment, automobiles, workshops, airplanes, boats, etc. Contains no ozone depleters. General FitmentACCESSORY
$15.33
Make a selection FVD33150010 Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 t6 aircraft aluminum. They will positively locate the suspension arms so suspension motion is accurately repeated in every corner. Sold as a set. 1 kit is necessary per car. Please note: we recommend this kit for race use, as noise may resonate inside the cabin during street use. For those that are concerned about the noise, please order part # FVD3310212291
$704.00
Make a selection VHTSP109 Vht flameproof™ coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. Vht flameproof™ coating will withstand temperatures up to 2000°f (1093°c) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed. General FitmentACCESSORY
$16.44
Make a selection WAP93600S18 Sporty, lightweight windbreaker made of wind-repellent material. Porsche logo printed on left chest and placed inside under mesh lining. Two pockets on the side with concealed zip fastening. One inside pocket. Knitted edging on hem and sleeves. Black. Mesh lining: 100% polyester. Outer material: 100% polyester. Sizes: s, m, l, xl, xxl. Available in november. General FitmentACCESSORY
$124.16
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |