102 not categorized PORSCHE 924 S SILL RIGHTCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 GT3 2003-05 - Pedal System/Levers (includes uncategorized and accessory items) 99335140887 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$721.60
Make a selection 70476LED The h-4 hella led headlamp conversion is the best thing you can do for your lighting! bright white light illuminates much further than stock or even the typical h4 headlamps, showing you the whole roadway. These hella leds bolt directly in place of your headlamps and include the cable and relay. The ultimate. A must for us near-sighted drivers! if you have a 356 six volt system please specify and we will substitute the six volt leds order two for a complete set. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 924 1986-88 924 1980-85 924 1976-79 944 1989-91 944 1985-88 944 1982-85 928 1983-86 928 1978-82 914 1970-76 968 1992-95 ACCESSORY
$199.00
Make a selection FVD512991GT3RS Made in Germany by a premier manufacturer of motorsport body work. Extremely high-quality, aero-tested, paintable grp (glass reinforced plastic) deck lid with functional GT3 wing. The decklid has functional, yet subtle ram air spoiler incorporated into the design like the GT3. The ram air spoiler increases the velocity of the air into the intake for added performance. This decklid is also available with a polished carbon wing, part # FVD 512 991 GT3 rsc features: produced by a premier German motorsports manufacturer. Motorsport quality standards. Lightweight. Decklid made of high strength, lightweight grp (glass reinforced plastic). Mounts like factory. Includes: grp deck lid grp wing grp end plates aluminum up...(choose a part on the right to read more)
$5,362.50
Make a selection 115333993008 If you are looking for a shock to combine with lowering springs or firmer springs the bilstein b8 is the ideal solution. These offer more performance than the b6 as the valving is more firm. These will pair well with h&r or eibach lowering springs, however you can also run them with euro mo30 (row) springs and mo33 springs. The product benefits at a glance: shortened high-performance shock absorbers for virtually every lowering spring set. Marked improvement in safety and sportiness with additional spring changes (lowering). Sporty feel, yet still comfortable. Offers precise handling and optimum control. Bilstein gas pressure technology. Bilstein mono-tube/upside-down technology. Made in Germany. Road-tested an...(choose a part on the right to read more)
$343.20
Make a selection FVD33150003 Rear toe control arms - order in pairs only restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can't compensate enough when lowering your Porsche, leaving you stuck with as much as ½ of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.
$218.90
Make a selection FVD512997GT3RST 997 GT3 rear spoiler fits 997turbo includes: deck lid, aluminum upright, 3rd brake light housing and kevlar/carbone wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass, kevlar-carbone. Also available with wing blade in fiber (gfk) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x
$6,528.50
Make a selection 93010734714 This part is sourced in Germany to ensure quality, reliability and precise fitment. This will fit all the vehicles listed in the fitment tab and those that have been updated to pressure fed tensioners. This line requires that you also purchase part # 93010734706 . We also recommend purchasing 1 qty. Union nut, part # 90010400303 and 1 qty. Cutting ring sleeve, part # n0208251 for installation. Also need the right side? Please order part # 93010734812 for the 911 3.2 l and 930 3.3l. Order part # 93010734815 for the 965 3.3 l. Sold individually. 1 necessary per car.
From $41.80
Make a selection FVD504993RS Made of polyurethane so they will not chip or crack like fiberglass, and are flexible enough to survive small impacts. Simple installation without any modifications to the original bodywork. Sold as a set (left and right). Not for wide body cars (993 turbo or turbo-look). Please note: these are aftermarket products. All aftermarket products need to be prepped, sanded, gaps checked / filled and painted. We only recommend professional installation with a shop that has aftermarket bodywork experience.
$696.30
Make a selection 99335140787 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$721.60
Make a selection 93010505304 High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. For installation on the left-hand side, you will need 1 qty. Spacer, part # 93010551300 and 1 qty. Chain wheel support, part # 93010550900. For installation on the right-hand side, you will need 1 qty. Spacer, part # 93010551300 and 1 qty. Chain wheel support, part # 93010551000 sold individually. Left or right-side fitment. 2 necessary per car.
From $589.60
Make a selection 17021102501 This is a high-quality replacement for original number, 930 211 025 01 manufactured by dansk. It is manufactured in steel and includes a corrosion resistant protective coating. Dansk offers a complete line of replacement parts to complement the entire Porsche model range. All dansk products are manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. For a proper installation, we recommend heat exchanger installation kit, part # FVDmk911102 sold individually. Right or left side fitment. 2 necessary per car. Please note: this will not fit u.s. 3.0 l SC mode...(choose a part on the right to read more)
$642.40
Make a selection FVD20798701 This oil pump is a must for vehicles driven on the track. The issue: the 987.1 Boxster/Cayman from 2005 to 2008 has the factory return oil pump located on the right rear side. On the left side, the return oil pump located in front. So when driven fast in right turns, the oil from the camshaft case (rear left) does not flow back quickly enough into the oil pan. When the oil pan is starved of oil, the oil pump sucks in air and over time the motor will seize. The solution: our tandem return oil pump draws oil from the camshaft housing in (rear left, 3rd cylinder) and feeds it back into the oil pan so that starvation is not created when cornering hard.
$2,744.50
Make a selection FVD34101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD424041 Ok, we know you are a driving enthusiast if you are shopping for a short shifter for your manual transmission. Driving enthusiasts appreciate a more direct connection to the car, transmission and road surface. If you are trying to clean up those long shifts and side to side play on the factory shifter you are certainly on the right track with this upgrade. This numeric racing short shift kit uses precision ball bearings on all axis' which produce 35% shorter throws with an almost gated like action. Short gated like throws increase your driving experience by enhancing a more direct, mechanical connection to your car. Once installed you will find joy with every shift and this will easily become one of your favor...(choose a part on the right to read more)
$808.50
Make a selection FVD34307101 Our direct replacement, OEM quality link uses rubber with a shore hardness value of 85. That is the same value as the rennsport models from Porsche. This link will offer superior performance under high cornering loads, more durability and are still forgiving for street use. Road noise not compromised with our links either. Facts: made in Germany. Crafted from high carbon steel and 7075 t6 aircraft aluminum. Weather sealed. Sold individually. Please note: we recommend buying these as a set, please purchase the right link, our part # FVD34307201
$93.50
Make a selection CAPLGHT This is a sleek, light-weight, multi-directional light that clips on your hat or any other object. It gets it’s illumination from either 2 or 4 high-powered led lights (switchable based on how much light you need) that provide a clean crisp light. Able to tilt and turn 360 degrees, this light makes it easy to brighten up whatever task you are working on. General FitmentACCESSORY
$13.19
Make a selection FVD631601A Update the look of your car to a brighter and more modern look. This bulb emits a brilliant blue-white light which also enhances safety on our older cars. Socket type: p14.5s sold individually.
$12.10
Make a selection TL1044 The battery disconnect bolts right onto the negative terminal of your battery for superior theft protection. Just loosen the black knob and your car wont start, and cannot be hot wired! Take the knob with you for the ultimate in protection. Exclusive fuse-link feature maintains just enough power so your clock setting and the preset stations on your radio wont be lost. If someone tries to start the car with the knob loose the fuse will break and the car will not start. Suitable for 6, 12 or 24 volt batteries. General FitmentALL911 1994-98
$24.50
Make a selection FVD512997TTRS 997 GT3 rear spoiler fits all 997 tt includes: deck lid, aluminum upright, 3rd brake light housing and wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass. Also available with wing blade in kevlar / carbon FVD512997gt3rs2 tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x
$5,407.60
Make a selection GR6032 Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. General FitmentALL
$40.95
Make a selection 802026 Hella is one of the top names in automotive lighting and electrical systems, since 1899. Hella produces lighting systems for many European OEM applications, as well as aftermarket performance lighting systems. Each of their light kits feature high-performance bulbs, quality-made lamp housings and mounts, precision-engineered reflectors and optics, and detailed installation instructions. The 550 high-performance fog lamp is made of high-impact abs plastic. It can be mounted upright or pendant. Each 550 kit contains (2) halogen lamps, (2) 12v 55 watt halogen bulbs, (1) prewired color-coded wire harness with 12v fused relay and illuminated rocker switch and (2) stone shields. Pre-fitted cables make installation ea...(choose a part on the right to read more) General FitmentALL
$135.00
Make a selection GR6036 Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. General FitmentALL
$52.95
Make a selection FVD34101802RAK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner. Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrange...(choose a part on the right to read more)
$438.90
Make a selection FVD424049ER If you are using numeric racing performance cables on your race car, then we suggest upgrading your rod ends to these steel ends which will take far more abuse at the track. These are recommended for race cars only as metal on metal contact means increased noise and vibration in the cabin. Sold individually.
$22.00
Make a selection FVD34307201 Our direct replacement, OEM quality link uses rubber with a shore hardness value of 85. That is the same value as the rennsport models from Porsche. This link will offer superior performance under high cornering loads, more durability and are still forgiving for street use. Road noise not compromised with our links either. Facts: made in Germany. Crafted from high carbon steel and 7075 t6 aircraft aluminum. Weather sealed. Sold individually. Please note: we recommend buying these as a set, please purchase the left link, our part # FVD34307101
$93.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |